299D3 XE Land Management Compact Track Loader
The Cat® 299D3 XE Land Management Compact Track Loader is a segment focused machine solution for customers involved in demanding vegetation-management applications, ranging from mulching, brush-cutting, vegetation control, and mowing. ...
Engine
- Gross Power - SAE J1995
- 110HP
- Net Power - SAE 1349
- 106HP
- Displacement
- 232in³
- Bore
- 3.9in
- Stroke
- 4.7in
- Net Power
- 106HP
- Net Power - ISO 9249
- 107HP
- Engine Model
- Cat C3.8 DIT (turbo)
- Peak Torque - 1,500 rpm - SAE J1995
- 276ft·lbf
Operating Specifications
- Rated Operating Capacities - 35% Tipping Load
- 4340lb
- Tipping Load
- 12400lb
- Breakout Force - Tilt Cylinder
- 7270lb
- Breakout Force - Lift Cylinder
- 6162lb
- Ground Pressure - With 450 mm/17.7 in Track
- 5.2psi
- Rated Operating Capacities - 50% Tipping Load
- 6200lb
- Ground Contact Area - With 450 mm/17.7 in Track
- 2443in²
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,
- Ground Contact Area - With 400 mm/15.7 in Track
- 2171in²
- Ground Pressure - With 400 mm/15.7 in Track
- 5.9psi
Weights
- Operating Weight
- 12764lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,
Service Refill Capacities
- Cooling System
- 4.1gal (US)
- Engine Crankcase
- 3.5gal (US)
- Fuel Tank
- 58gal (US)
- Hydraulic System
- 14.5gal (US)
- Hydraulic Tank
- 10.3gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 5gal (US)
Dimensions
- Length - Track on Ground
- 69.6in
- Overall Length - Track
- 89.4in
- Height - Top of Cab
- 83.6in
- Ground Clearance
- 9.6in
- Departure Angle
- 33°
- Maximum Dump Angle
- 54°
- Vehicle Width (450 mm/17.7 in tracks)
- 78in
- Turning Radius from Center - Coupler
- 58.1in
- Turning Radius from Center - Machine Rear
- 74in
- Vehicle Width (400 mm/15.7 in tracks)
- 76in
- Turning Radius from Center - Bucket (racked)
- 91.1in
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,
- Length - Without Bucket
- 125.5in
- Bucket Pin Reach - Maximum Lift
- 19.4in
- Clearance at Maximum Lift and Dump
- 94.5in
- Rack Back Angle - Maximum Height
- 81°
- Maximum Overall Height
- 158.7in
- Reach - Maximum Lift/Dump
- 33.6in
- Length - With Bucket on Ground
- 154.7in
- Maximum Reach - With Arms Parallel to Ground
- 51.9in
- Bucket Pin Height - Maximum Lift
- 126.3in
- Bucket Pin Height - Carry Position
- 7.1in
- Roll Back Angle
- 25°
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
Hydraulic System
- Standard Flow Mode - Loader Hydraulic Flow
- 23gal/min
- Standard Flow Mode - Loader Hydraulic Pressure
- 3335psi
- Standard Flow Mode - Hydraulic Power - Calculated
- 44HP
- Hydraulic Flow - XE - Hydraulic Power (calculated)
- 94HP
- Hydraulic Flow - XE - Maximum Loader Hydraulic Flow*
- 40gal/min
- Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure
- 4061psi
- Note
- *When equipped with Cat 400 Series work tools.
Power Train
- Travel Speed - Forward or Reverse - Two Speed
- 8.3mile/h
- Travel Speed - Forward or Reverse - One Speed
- 5.5mile/h
Noise Level
- Note (2)
- *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
- Note (1)
- Sealed and pressurized cab is standard in North America and Europe.
- Note (3)
- **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
- Inside Cab*
- 83dB(A)
- Outside Cab**
- 104dB(A)
Air Conditioning System (if equipped)
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Extend Your Working Time
The 299D3 XE Land Management machine comes standard with two large capacity external fuel tanks (220 L /58 gal - total). These large tanks will help increase your working time by fueling up less.
Powerful Hydraulics
The XE hydraulic system provides high flow and high pressure that delivers industry leading hydraulic horsepower to efficiently run even the most power hungry work tools.
Protective Guarding and Sealing
Factory-equipped guarding and sealing components to provide additional protection for areas that could be exposed to damage and to help reduce debris entry.
Maximum Performance
High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability.
Quiet and Comfortable
The industry leading sealed and pressurized cab option provides the operator with a cleaner and quieter operating environment with excellent work tool visibility. Continuing the industry leading trend, the D3 Series also includes as standard, seat mounted adjustable joystick controls for operator comfort.
