299D3 XE Compact Track Loader

299D3 XE Compact Track Loader

360° Exterior View (HTML5)

The Cat® 299D3 XE Compact Track Loader, with its powerful engine, high output hydraulic system, high lift forces, vertical lift design and torsion axle suspension, provides the maximum performance for ...
PDF Print SHARE

Engine

Gross Power - SAE J1995
110HP
Net Power - SAE 1349
106HP
Displacement
232in³
Bore
3.9in
Stroke
4.7in
Net Power - ISO 9249
107HP
Net Power
106HP
Peak Torque - 1,500 rpm - SAE J1995
276ft·lbf
Engine Model
Cat C3.8 DIT (turbo)

Operating Specifications

Rated Operating Capacities - 35% Tipping Load
3560lb
Ground Contact Area
2184in²
Ground Pressure
5.4psi
Tipping Load
10170lb
Breakout Force - Tilt Cylinder
7270lb
Breakout Force - Lift Cylinder
6162lb
Rated Operating Capacity with Optional Counterweight
5360lb
Ground Pressure - With 450 mm/17.7 in Track
4.8psi
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Rated Operating Capacities - 50% Tipping Load
5085lb
Ground Contact Area - With 450 mm/17.7 in Track
2463in²

Weights

Operating Weight
11756lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA

Service Refill Capacities

Cooling System
4.1gal (US)
Engine Crankcase
3.5gal (US)
Fuel Tank
31.7gal (US)
Hydraulic System
14.5gal (US)
Hydraulic Tank
10.3gal (US)
Diesel Exhaust Fluid (DEF) Tank
5gal (US)

Dimensions

Length - Track on Ground
69.6in
Overall Length - Track
89.4in
Height - Top of Cab
83.6in
Ground Clearance
9.6in
Departure Angle
33°
Maximum Dump Angle
54°
Maximum Overall Height
158.7in
Bucket Pin Height - Carry Position
7.1in
Turning Radius from Center - Coupler
58.1in
Reach - Maximum Lift/Dump
33.6in
Length - Without Bucket
125.5in
Turning Radius from Center - Machine Rear
74in
Turning Radius from Center - Bucket (racked)
91.1in
Bucket Pin Reach - Maximum Lift
19.4in
Clearance at Maximum Lift and Dump
94.5in
Rack Back Angle - Maximum Height
81°
Vehicle Width (400 mm/15.7 in tracks)
76in
Bucket Pin Height - Maximum Lift
126.3in
Length - With Bucket on Ground
154.7in
Maximum Reach - With Arms Parallel to Ground
51.9in
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Roll Back Angle
25°

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I

Hydraulic System

Standard Flow Mode - Loader Hydraulic Pressure
3335psi
Note
*When equipped with Cat 400 Series work tools.
Standard Flow Mode - Hydraulic Power - Calculated
44HP
Standard Flow Mode - Loader Hydraulic Flow
23gal/min
Hydraulic Flow - XE - Hydraulic Power (calculated)
94HP
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow*
40gal/min
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure
4061psi

Power Train

Travel Speed - Forward or Reverse - One Speed
5.2mile/h
Travel Speed - Forward or Reverse - Two Speed
8.4mile/h

Noise Level

Inside Cab*
83dB(A)
Outside Cab**
104dB(A)
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Air Conditioning System (if equipped)

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Quiet and Comfortable

The industry leading sealed and pressurized cab option provides the operator with a cleaner and quieter operating environment with excellent work tool visibility. Continuing the industry leading trend, the D3 Series also includes as standard, seat mounted adjustable joystick controls for operator comfort.

Maximum Performance

High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability.

Making Your Job Easier

Cat® “Intelligent Leveling” system provides industry leading technology, integration, and available features such as dual direction self level, work tool return to dig, and work tool positioner.

A Smooth Ride

A standard, fully independent torsion axle suspension combined with the Speed Sensitive Ride Control system improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort.

Optimized Machine Capability

Maximize machine capability and control with the available Advanced Display, providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.

Standard Equipment:

Optional Equipment:

    Optional Equipment
    • Beacon, Rotating
    • Engine Block Heater – 120V
    • Oil, Hydraulic, Cold Operation
    • Paint, Custom
    • Variable Speed Demand Fan with Reversing Functionality
    • External Counterweights
    • Product Link PL641, Cellular
    • Bluetooth® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)