G3616 A4 Gas Compression Engine

G3616 A4 Gas Compression Engine

360° Exterior View

G3600 A4 engines provide a wide range of power options to fit your gas compression application. G3600 A4 engines bring the highest uptime in the industry and long ...
PDF Print SHARE

Engine Specifications

Minimum Rating
5000BHP
Maximum Rating
5350BHP
Emissions
NSPS Site Compliant Capable
Displacement
20698in³
Compression Ratio
9.2:1
Aspiration
Turbocharged-Aftercooled
Rotation from Flywheel End
Counterclockwise
Flywheel Teeth
255
Weight - Dry
72000lb
Oil Change Interval
5000 hours
Ignition, Protection
Electronic, ADEM™ A4
Stroke
11.8in
Bore
11.8in

Capacity for Liquids

Cooling System
211gal (US)
Lube Oil System - Refill
351gal (US)

Emissions

Meets U.S. EPA Spark Ignited Stationary NSPS Emissions for 2010/11 with the use of an oxidation catalyst

Lean Burn Engine Technology

Lean-burn engines operate with large amounts of excess air. The excess air absorbs heat during combustion reducing the combustion temperature and pressure, greatly reducing levels of NOx. Lean-burn design also provides longer component life and excellent fuel consumption

Ease of Operation

- High-strength pan and rails for excellent mounting and stability - Side covers on block allow for inspection of internal components

Advanced Digital Engine Management

ADEM A3 engine management system integrates speed control, air/fuel ratio control, and ignition/detonation controls into a complete engine management system. ADEM A3 has improved: user interface, display system, shutdown controls, and system diagnostics.

Full Range of Attachments

Large variety of factory-installed engine attachments reduces packaging time.

Testing

Every engine is full-load tested to ensure proper engine performance

Gas Engine Rating Pro

GERP is a PC-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.

Product Support Offered Through Global Cat Dealer

More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Cat parts and labor warranty Preventive maintenance agreements available for repairbefore-failure options S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval

Over 80 Years of Engine Manufacturing Experience

Over 60 years of natural gas engine production Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products - Cast engine blocks, heads, cylinder liners, and flywheel housings - Machine critical components - Assemble complete engine

Web Site

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

Web Site

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

Standard Equipment:

Optional Equipment:

    Air Inlet System
    • Heavy-duty air cleaner with precleaners
    Charging System
    • 35 Amp & 65 Amp charging alternators – CSA approved
    Exhaust System
    • Flexible bellows adapters
    • Exhaust expander
    • Weld flanges
    Fuel System
    • Fuel filter
    • Gas pressure regulator
    • Flexible connection
    • Flexible connection
    Instrumentation
    • Remote data monitoring and speed control
    • Compatible with Cat Electronic Technician (ET) and Data View
    • LCD display panel
    • Color HMI display
    • Modbus and Ethernet capable
    Lube System
    • Air or electric motor-driven prelube
    • Duplex oil filter
    Mounting System
    • Mounting plates (set of six)
    Power Take-offs
    • Front stub shafts
    Starting System
    • Air pressure reducing valve
    • Natural gas starting system
    General
    • Engine barring device
    • Damper guard