285 Compact Track Loader
Engine
- Gross Power - SAE J1995
- 111hp
- Bore
- 4.7in
- Displacement
- 220in²
- Net Power - ISO 9249
- 109hp
- Net Power - SAE 1349
- 82hp
- Peak Torque - 1,500 rpm - SAE J1995
- 370lb/ft
- Stroke
- 4.7in
- Engine Model
- Cat???????® C3.6 TA (turbocharged after-cooled)
Operating Specifications
- Rated Operating Capacities - 35% Tipping Load
- 4461lb
- Breakout Force - Lift Cylinder
- 8730lb
- Breakout Force - Tilt Cylinder
- 13920lb
- Ground Contact Area - With 450 mm/17.7 in Track
- 2724in²
- Ground Pressure - With 450 mm/17.7 in Track
- 5psi
- Rated Operating Capacities - 50% Tipping Load
- 6372lb
- Tipping Load
- 12745lb
Weights*
- Operating Weight
- 13497lb
- Counterweight Adds to Operating Weight
- 428lb
- Counterweight Adds to Operating Weight - ROC (35%)
- 296lb
- Counterweight Adds to Operating Weight - Tip Load
- 847lb
- Note
- *Operating Weight, Operating Specifications, and Dimensions are all based on 75 kg (165 lb) operator, all fluids, two speed, 2188 mm (86 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydra
Dimensions
- Bucket Pin Height - Carry Position
- 8.2in
- Bucket Pin Height - Maximum Lift
- 146.6in
- Bucket Pin Reach - Maximum Lift
- 16.3in
- Clearance at Maximum Lift and Dump
- 119.6in
- Departure Angle
- 26°
- Ground Clearance
- 11in
- Height - Top of Cab
- 87.8in
- Length - Track on Ground
- 72in
- Length - With Bucket on Ground
- 157.4in
- Length - Without Bucket
- 132.3in
- Maximum Overall Height
- 178in
- Maximum Reach - With Arms Parallel to Ground
- 50.6in
- Overall Length - Track
- 85.8in
- Rack Back Angle - Maximum Height
- 89°
- Reach at Maximum Lift/Dump
- 34.7in
- Roll Back Angle
- 27.2°
- Turning Radius from Center - Bucket (racked)
- 94.5in
- Turning Radius from Center - Coupler
- 62.1in
- Turning Radius from Center - Machine Rear
- 74.3in
- Vehicle Width (450 mm/17.7 in tracks)
- 81.8in
- Maximum Dump Angle
- 40.5°
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
- FOPS Level II
- ISO 3449:2005 Level II (Optional)
Service Refill Capacities
- Cooling System
- 4.6gal (US)
- Engine Crankcase
- 2.4gal (US)
- Fuel Tank
- 36gal (US)
- Hydraulic System
- 10.8gal (US)
- Hydraulic Tank
- 6.9gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 2.9gal (US)
Power Train
- Travel Speed - Forward or Reverse - One Speed
- 4.8mile/h
- Travel Speed - Forward or Reverse - Two Speed
- 7.7mile/h
Hydraulic System
- Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
- 80.7hp
- Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
- 34gal/min
- Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
- 4061psi
- Hydraulic Flow - Standard - Hydraulic Power (Calculated)
- 46.4hp
- Hydraulic Flow - Standard - Loader Hydraulic Flow
- 23gal/min
- Hydraulic Flow - Standard - Loader Hydraulic Pressure
- 3500psi
Redesigned Operator Station
Redesigned operator station delivers a larger operating environment. Combined with additional seat travel, the 285 provides more space for operators of any size. The optional one-piece, sealed, and pressurized cab offers a clean and quiet workspace with excellent air distribution through optimally placed vents throughout the cab.
Available Ventilated and Heated High-Back Air Ride Seat
Available ventilated and heated high-back air ride seat and seat mounted adjustable joystick controls deliver industry-leading operator comfort.
High-Performance Power Train
The high-performance power train provides maximum performance and production capability along with standard two speed travel. The optional Speed Sensitive Ride Control system improves material retention and operator comfort when working on rough terrain.
Three Levels of Auxiliary Hydraulic Performance
Three levels of auxiliary hydraulic performance are available - Standard Flow, High Flow, and High Flow XPS. Standard flow for attachments that require a base level of auxiliary flow and horsepower, High Flow boosts the auxiliary flow for applications that demand additional hydraulic flow for increased attachment performance, and the High Flow XPS hydraulic system provides maximum auxiliary hydraulic performance by delivering additional flow and additional pressure for the most demanding attachments and applications
Electronically Controlled Cat C3.6TA (turbocharged, aftercooled) Engine
The electronically controlled Cat C3.6TA (turbocharged, aftercooled) engine delivers maximum horsepower across a wide RPM range. It provides high torque for increased working performance, no matter the application.
Standard Equalizer Bar (E-bar) Undercarriage and Standard Two-Speed Travel
The standard E-bar undercarriage provides a hybrid undercarriage solution delivering the benefits of a rigid style undercarriage design when lifting heavy loads or when using heavy attachments while also providing the benefits of an oscillating undercarriage design when encountering rough terrain or obstacles.
Advanced Touchscreen Monitor
The Advanced Touchscreen Monitor offers cutting-edge functionality and control that includes an integrated radio, Bluetooth® connectivity, and multi-camera (side-view) option, and supports 32 different language choices.
Advanced Joysticks
Maximize machine capability and control with the Advanced Joysticks. The Advanced Joysticks provide unmatched control of machine functions and adjustments within the display without having to remove your hands from the controls. This includes the on-joystick navigation of the Advanced Touchscreen Monitor, radio volume up/down/mute, creep activation, creep on/off, creep speed increment/decrement, one-button Smart Attachment control activation, and additional auxiliary control buttons that deliver single-button control of complex attachment functions.
Ground-Level Access
Ground-level access to all daily service and routine maintenance points helps reduce machine downtime for greater productivity.
Cat Attachments
Make your Cat Compact Track Loader the most versatile machine on the job site with the wide range of Cat attachments.
