TH514C Telehandler

TH514C Telehandler

PDF Print SHARE

Operating Specifications

Rated Load Capacity
11021lb
Maximum Lift Height
45ft
Load at Maximum Height - Stabilizers Down
7000lb
Load at Maximum Height - Stabilizers Up
4000lb
Maximum Forward Reach
30.25ft
Load at Maximum Reach - Stabilizers Down
3000lb
Load at Maximum Reach - Stabilizers Up
1000lb
Top Travel Speed
20mile/h
Outside Turning Radius - Over Tires
12.86ft
Drawbar Pull 74.5 kW
22037lb
Maximum Lift Height - Stabilizers Up
43.5ft
Maximum Lift Height - Stabilizers Down
45ft

Engine

Engine Model
Cat® C3.4B (meets U.S. EPA Tier 4 Interim Emission Standards)
Bore
3.9in
Stroke
4.3in
Displacement
207.5in³
Maximum Torque
420 N·m/1,400 rpm
Gross Power - ISO 14396
101HP

Tires

Standard
14.00-24 16PR TG-02

Hydraulic System

Maximum System Pressure
3626psi
Maximum Pump Flow
39.63gal/min
Pump Type
Variable displacement load sensing axial piston pump
Auxiliary Hydraulic Supply - Intermittent
21.13gal/min
Auxiliary Hydraulic Supply - Continuous
15.85gal/min

Service Refill Capacities

Fuel Tank
39.63gal (US)
Hydraulic Tank
23.78gal (US)

Transmission Speeds

Forward - 1
3.6mile/h
Forward - 2
6.7mile/h
Forward - 3
15.2mile/h
Forward - 4
20mile/h
Reverse - 1
3.4mile/h
Reverse - 2
6.7mile/h
Reverse - 3
14.9mile/h

Boom Performance

Boom Up
13.7s
Boom Down
14.6s
Tele In
19.1s
Tele Out
16.6s
Crowd Forward - Dump
4.8s
Crowd Backward
4.7s
Combined - Up and Out
28s
Combined - Down and In
19s
Bucket Breakout Force - ISO 8313
21356lb
Boom Breakout Force
14162lb

Weights

Operating Weight - With Carriage and Forks
24890lb

Brakes

Parking Brakes
Mechanical on front axle
Service Brakes
Servo assisted on front axle

Sound

Exterior Sound - 74.5 kW Engine
106dB(A)

IMPORTANT

Rated lift capacities shown are with machine equipped with carriage and pallet forks. The machine must be level on a firm surface with undamaged, properly inflated tires as specified by the manufacturer. Machine specifications and stability are based on rated lift capacities at specific boom angles and boom lengths. (If specifications are critical, the proposed application should be discussed with your dealer.) DO NOT exceed rated lift capacity loads, as unstable and dangerous machine conditions will result. DO NOT tip the machine forward to determine the allowable load. Use only JLG approved attachments with proper material handler model/attachment load capacity charts displayed in the operator's cab. OSHA requires all rough terrain forklift operators be trained according to OSHA 29 CFR 1910.178 (l). Due to continuous product improvements, machine specifications and/or equipment changes may be made without prior notification. This machine meets or exceeds ANSI/ITSDF B56.6-2005 as originally manufactured for intended applications.