Cat D3K2 Dozer Rentals In OK & TX

Home | Rental Equipment | CAT Machines | Dozer Rentals | D3K2 Track-Type Tractor

D3K2 Track-Type Tractor

Experience the best finish grading tractors in the industry. The Cat® D3K2, D4K2 and D5K2 Track-Type Tractors deliver superior performance and comfort with lower operating costs. ...

PDF Print

Engine

Engine Model: Cat C4.4
Power - Net: 80HP
Displacement: 269in³
Bore: 4.13in
Stroke: 5in
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269: 80HP
Net Power - 2,200 rpm - SAE J1349: 80HP
Note: Engine meets U.S. EPA Tier 4 Final emission standards.

Weights

Operating Weight - XL: 17465lb
Operating Weight - LGP: 18442lb
Note (1): Specifications shown are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.
Operating Weight - LGP, 762 mm/30 in: 18896lb
Note (2): Enclosed cab adds 225 kg (495 lb).

Transmission

Drive Pumps: 1
Track Motors: 2
Relief Valve Settings: 7033psi
Maximum Travel Speed - Reverse: 6.2mile/h
Maximum Travel Speed - Forward: 5.6mile/h

Hydraulic Controls

Pump Output: 17.7gal/min
Relief Valve Settings: 2988psi

Winch

Weight: 1345lb
Winch Drive: Hydrostatic
Control: Hydraulic
Speed: Variable
Overall Width: 29.2in
Drum Width: 10.8in
Throat Clearance: 6.75in
Rope Diameter - Recommended: 0.63in
Rope Diameter - Optional: 0.75in
Drum Capacity - Recommended Cable: 371ft
Maximum Line Pull - Bare Drum: 40000lb
Maximum Line Pull - Full Drum: 25000lb
Maximum Line Speed - Bare Drum: 131ft/min
Drum Capacity - Optional Cable: 256ft
Drum Diameter: 10in
Maximum Line Speed - Full Drum: 207ft/min
Winch Length: 27.76in

Ripper

Type: Parallelogram
Number of Shanks: 3
Height: 6.5in
Weight: 1222lb
Maximum Digging Depth: 13.3in
Maximum Reach - Ground Line: 30.2in
Maximum Ground Clearance Under Tip: 17.6in
Overall Width: 67.3in

Dimensions

BLADE: Blade Capacity (SAE) - Intermediate: 1.96yd³
Track Gauge - LGP, 762 mm (30 in): 73in
Width - Tractor - Standard Shoes - No Blade - LGP (762 mm/30 in): 94.9in
Overall Length - With Blade - LGP, 762 mm (30 in): 167.6in
Tractor Height - LGP, 762 mm (30 in): 108.8in
Width - Tractor - Standard Shoes - No Blade - LGP: 92.9in
Track Gauge - XL: 58.9in
Tractor Height - LGP: 108.8in
Tractor Height - XL: 108.8in
Length - Basic Tractor - Without Blade - XL: 128.9in
Length - Basic Tractor - Without Blade - LGP: 128.9in
Ground Clearance - LGP: 13in
BLADE: Maximum Tilt - XL: 14.5in
BLADE: Maximum Angle (either side) - Intermediate: 25°
BLADE: Maximum Angle (either side) - XL: 25°
BLADE: Digging Depth - XL: 22.5in
BLADE: Digging Depth - LGP: 22.5in
BLADE: Digging Depth - Intermediate: 22.5in
BLADE: Blade Lift Height - XL: 28.7in
BLADE: Blade Width - Intermediate: 115in
BLADE: Blade Width - LGP: 124in
BLADE: Blade Width - XL: 104.2in
BLADE: Blade Width at Maximum Angle - Intermediate: 105.1in
BLADE: Blade Width at Maximum Angle - LGP: 113.1in
BLADE: Blade Width at Maximum Angle - XL: 95.2in
BLADE: Blade Lift Height - LGP: 28.7in
BLADE: Blade Lift Height - Intermediate: 29.3in
BLADE: Blade Height - Intermediate: 33.9in
BLADE: Blade Cutting Edge Angle, Adjustable - XL: 52° to 58°
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate: 52° to 58°
BLADE: Blade Capacity (SAE) - XL: 1.99yd³
BLADE: Blade Capacity (SAE) - LGP: 2.17yd³
Overall Length - With Blade - XL: 168in
Overall Length - With Blade - LGP: 167.6in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP: 52° to 58°
BLADE: Blade Height - LGP: 33.8in
BLADE: Blade Height - XL: 35.8in
BLADE: Maximum Angle (either side) - LGP: 25°
BLADE: Maximum Tilt - Intermediate: 17.7in
BLADE: Maximum Tilt - LGP: 17.2in
Ground Clearance - LGP, 762 mm (30 in): 13in
Ground Clearance - XL: 13in
Length - Basic Tractor - Without Blade - LGP, 762 mm (30 in): 128.9in
Track Gauge - LGP: 67.9in
Width - Tractor - Standard Shoes - No Blade - XL: 74.8in

Cab

Sound Levels - SAE J1166 FEB2008: 79dB(A)
Sound Levels - ISO 6396:2008: 79dB(A)
FOPS: ISO 3449:2005 Level II
ROPS: ISO 3471:2008

Service Refill Capacities

Cooling System: 5.92gal (US)
Crankcase - With Filter: 2.91gal (US)
Final Drive - Each - XL: 2.6gal (US)
Final Drive - Each - LGP: 2.6gal (US)
Transmission - Hydraulic Tank: 15.7gal (US)
Fuel Tank: 51.5gal (US)
Diesel Exhaust Fluid (DEF) Tank: 4.9gal (US)

Undercarriage

Track Gauge - LGP, 762 mm (30 in): 73in
Shoe Width - LGP: 25in
Ground Pressure - XL: 6.2psi
Ground Pressure - LGP, 762 mm (30 in): 3.6psi
Ground Pressure - LGP: 4.2psi
Ground Contact Area - XL: 2829in²
Shoe Width - XL: 16in
Length - Track on Ground - XL: 89in
Length - Track on Ground - LGP: 89in
Track Gauge - XL: 59in
Track Gauge - LGP: 68in
Ground Contact Area - LGP: 4425in²
Ground Contact Area - LGP, 762 mm (30 in): 5340in²
Shoe Width - LGP, 762 mm (30 in): 30in
Number of Shoes - Each Side - SystemOne Undercarriage: 38
Length - Track on Ground - LGP, 762 mm (30 in): 89in
Number of Rollers - Each Side: 6
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage: 43

Grade with ease and accuracy

The D3K2 Dozer offers numerous grade control features to enable operators to grade with increased accuracy. Features such as Cat® GRADE with 3D, Cat GRADE with Slope Assist, AccuGrade and Slope Indicate allows for a smooth finish grade for both new and experienced operators every time.

Choices for any Application

The family of Small Dozers offers a choice of both track frames and undercarriages.

Track frames are available in two configurations:

• XL undercarriage - where flotation and side stability are not extreme
• LGP undercarriage - for soft underfoot conditions where additional flotation is required

Undercarriages are available in two configurations:

• Sealed and Lubricated Track (SALT) Undercarriage
– Track is not bushing limited
– May require pin and bushing turn

• SystemOne™ Undercarriage
– Track is bushing limited
– Bushing rotates continuously
– Does not require bushing turn
– Designed to maximize the life of all undercarriage components

All Day Comfort

The spacious, comfortable cab helps keep you relaxed and productive throughout the day.
• Quiet environment
• Wide door openings for easy entry/exit
• Dash mounted air vents for improved air circulation
• Air suspension seat for a more comfortable ride
• Air conditioning for greater comfort in all climates
• New ventilated seat (optional)
• Heated seat and heated control handles (optional)

Easy Serviceability Access

Long service intervals and easy maintenance keep the machine up and running to lower your owning and operating costs.
• Large, hinged door on the left side of the engine compartment for easy access to all regular engine maintenance points
• Grouped pressure taps for quick testing and troubleshooting of the hydraulic system
• Easy ground level access to hydraulic filters located in the left rear service compartment

Standard Equipment:

Electrical

Alternator, 12 volt, 120 Amp, heavy duty brushless
Alarm, backup
Batteries (2), heavy duty, maintenance free, 1,500 CCA
Diagnostic connector
Horn, electric
Lights, halogen, 2 front and 2 rear
Starter, electric, 12 volt

Operator Station

ROPS/FOPS canopy
Seat, air suspended, cloth or vinyl
Seatbelt, retractable 76 mm (3 in)
Foot pads, dash
Electronic Monitoring System with:
– Gauges for engine coolant temperature, hydraulic oil temperature and fuel level
– Travel speed limiter, electronic
– Engine RPM and gear display
– Hour meter, electric
– Engine air cleaner service indicator, electronic
– Water-in-fuel indicator, electronic
Slope Indicate
Throttle switch, rotary
Eco mode
Controls, seat mounted, fore/aft adjustment
Armrests, adjustable
Mirror, rearview, inside
Single pedal combining deceleration and braking functions
Independent forward/reverse speed settings
Power port, 12 volt
Coat hook
Storage compartment
Cup holder
Floor mat, rubber, heavy duty

Hydraulics

Hydraulics, 3 valve
Load sensing hydraulics
Single lever, three function control
Hydraulic pump and oil
Stable blade control

Power Train

Cat^® C4.4 diesel engine, turbocharged, U.S. EPA Tier 4 Final certified with aftertreatment
Aftercooler, Air-to-Air (ATAAC)
Aluminum bar plate cooling system (radiator, power train)
Air cleaner with precleaner, automatic dust ejection and under-hood intake
Dual path, closed-loop hydrostatic transmission
Electric fuel priming pump
Fuel/water separator
Automatic Traction Control

Undercarriage

SALT Undercarriage
6 roller track frame
Track rollers, lifetime lubricated
Carrier rollers
Track adjusters, hydraulic
Guards, front/rear guiding
Master link

Other Standard Equipment

Cat Product Link^™ PLE732 Satellite/PLE742 Cellular
C-Frame, VPAT, hydraulic cylinders and lines
Lockable engine enclosures
Front pull device
Rigid drawbar
Ecology drains (engine, power train and implement oil and engine coolant)
Scheduled oil sampling ports (engine, power train implement oil)
Vandalism protection
Heavy duty crankcase guard

Antifreeze

Extended life coolant, –37° C (–35° F)

Optional Equipment:

Electrical

Integrated four front halogen lights, two rear halogen lights

Power Train

Drive, auxiliary
Installation, winch

Undercarriage

Track Pairs, XL:
– Track, 406 mm (16 in) MS SystemOne
Track Pairs, LGP:
– Track, 635 mm (25 in) MS SystemOne
– Track, 762 mm (30 in) MS SystemOne

Operator Station

Cab with air conditioning
Cab, polycarbonate windows and air conditioning
Seat, air suspension, choice of:
– Vinyl, heated seat with heated controls
– Cloth, heated seat with heated controls
– Cloth, heated and ventilated seat with heated controls
Radio, AM/FM, Bluetooth
Sound suppression

Hydraulics

Hydraulics, 4 valve for use with ripper
Hydraulics, 4 valve for use with winch

Guards

Guard, rear, heavy duty
Grill, radiator, heavy duty
Guard, track guiding, center
Guard, track roller, full length
Screen, rear, cab
Screen, side, cab
Screen, rear, canopy
Screen, front and doors, canopy
Sweeps, front
Sweeps, rear

Blades

VPAT XL blade
VPAT LGP blade
VPAT Intermediate blade

Rear Attachments

Drawbar, towing
Mounting, winch
Ripper, parallelogram, includes three shanks and teeth

Rear Attachment Control

Control, ripper
Control, winch
Control, ripper and winch

Machine Control And Guidance

Cat GRADE with 3D
Cat GRADE with Slope Assist
Power Pitch blade control

Starting Aids

Heater, engine, coolant, 120 volt
Starting aid, ether

Other Attachments

Machine Security System

Antifreeze

Extended life coolant, –50° C (–58° F)

Field Installed Attachment

Winch, hydraulic, high performance, 40 m/min (131 ft/min) line speed
Winch, hydraulic retrieval, 15 m/min (50 ft/min) line speed