Cat C32 Generator Set (US EPA Tier 3 / IMO II)

Cat C32 Generator Set (US EPA Tier 3 / IMO II)

Print SHARE

Generator Set Specifications

Minimum Rating
219 ekW
Maximum Rating
940 ekW
Frequency
60hz

Engine Specifications

Configuration
Vee-12, 4-stroke-Cycle-Diesel
Aspiration
Turbocharged-aftercooled aspiration
Bore
5.71in
Stroke
6.38in
Displacement
1959in³
Emissions
U.S. EPA Tier 3 / IMO II emissions certified
Cooling
Heat exchanger, keel or radiator cooled
Governor
Electronic (A4 ECM)
Rated Engine Speed
1800 rpm
Generator
SR5 - Form Wound
Oil Change Interval
750 hrs
Refill Capacity
Lube Oil System w/ oil filter change: 146 L (38.5 gal)

Generator Set Dimensions

Length
167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width
59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height
70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
Package Dry Weight
15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)

Standard Equipment:

Optional Equipment:

    Air Inlet System
    • Closed crankcase ventilation
    Alarm And Protection
    • MGCP II or MGCP IIIB control panel with Cat® alarm and protection system
    • IP44 generator protection
    Exhaust System
    • Muffler
    • SOLAS approved spray shielding
    Charging System
    • Charging alternator
    Control System
    • EMCP 4.2 control panel
    Fuel System
    • Installed primary fuel filter with water separator and manual or electric priming pump
    • Fuel cooler
    Lube System
    • Duplex oil filters
    Starting System
    • Starting motors – air, electric or dual