Cat® 3512B Industrial Diesel Engine
The Cat® 3512B Industrial Diesel Engine is offered in ratings ranging from 1119-1231 bkW (1500-1650 bhp) @ 1800 rpm. These ratings are non-certified and are available for global non-regulated areas.
...The Cat® 3512B Industrial Diesel Engine is offered in ratings ranging from 1119-1231 bkW (1500-1650 bhp) @ 1800 rpm. These ratings are non-certified and are available for global non-regulated areas. Industries and applications powered by 3512B engines include Bore/Drill Rigs, Chippers/Grinders, Construction, Cranes, Dredgers, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.
Power Rating
- Maximum Power
-
1650HP
- Maximum Torque
-
5296lb-ft @ 1450 rpm
- Rated Speed
-
1800 rpm
- Minimum Power
-
1500HP
Emission Standards
- Emissions
-
Non-Certified
Engine Dimensions - Approximate
- Length
-
120.8in
- Width
-
70.3in
- Height
-
71.1in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
-
13400lb
General
- Engine Configuration
-
V-12, 4-Stroke-Cycle Diesel
- Bore
-
6.7in
- Stroke
-
7.5in
- Displacement
-
3158in³
- Aspiration
-
Turbocharged Aftercooled
- Rotation from Flywheel End
-
Counterclockwise
- Aftertreatment
-
-
Reliable, Quiet and Durable Power
World-class manufacturing capability and processes coupled with proven core engine designs assure reliability, quiet operation, and many hours of productive life.
Fuel Efficiency
Fuel consumption optimized to match operating cycles of a wide range of equipment and applications while maintaining low operating costs.
Quality
Every Cat engine is manufactured to stringent quality standards in order to assure customer satisfaction.
World-class Product Support Offered Through Global Cat Dealer Network
- Scheduled maintenance, including SOSSM sample
- Customer Support Agreements (CSA)
- Caterpillar Extended Service Coverage (ESC)
- Superior dealer service network
- Extended dealer service network through the Cat Industrial Service Distributor (ISD) program
Standard Equipment:
- Air Inlet System
-
- Aftercooler core, corrosion resistant coated (air side)
- Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
- Turbocharger, rear mounted
- Jacket water aftercooled
- Control System
-
- Governor, RH, 3161 with self contained synthetic oil sump
- Air-fuel ratio control
- Mechanical speed control, without torque control
- Governor control
- Positive locking
- Cooling System
-
- Thermostats and housing
- Jacket water pump, centrifugal
- Flywheels And Flywheel Housing
-
- SAE No. 00 flywheel
- 183 flywheel teeth
- SAE No. 00 flywheel housing
- Fuel System
-
- Fuel filter, with service indicators, cartridge type with RH service
- Fuel transfer pump
- Instrumentation
-
- Instrument Panel, RH
- Engine oil pressure gauge
- Fuel pressure gauge
- Oil filter differential gauge
- Jacket water temperature gauge
- Service meter, electric
- Tachometer
- Lube System
-
- Crankcase breather, top mounted
- Oil cooler
- Oil filler
- Oil dipstick
- Oil pump
- Oil filter, cartridge type with RH service
- Shallow oil pan
- Fumes disposal (not installed)
- Mounting System
-
- Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
- Power Take Off
-
- Accessory drive, upper RH
- Front housing, single sided
- Protection System
-
- Junction box
- Manual shutoff, RH
- Safety shutoff protection, energized to shutdown
- Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
- Water temperature
- Overspeed
- 3161 governor solenoid energized to shutdown
- General
-
- Vibration damper
- Lifting eyes
- Paint: Caterpillar yellow, with optional colors available at request
