Cat® 3508B Industrial Diesel Engine
The Cat® 3508B Industrial Diesel Engine is offered in ratings ranging from 746-820 bkW (1000-1100 bhp) @ 1800 rpm. These ratings are non-certified and are available for global
...The Cat® 3508B Industrial Diesel Engine is offered in ratings ranging from 746-820 bkW (1000-1100 bhp) @ 1800 rpm. These ratings are non-certified and are available for global non-regulated areas. Industries and applications powered by 3508B engines include Bore/Drill Rigs, Chippers/Grinders, Construction, Cranes, Dredgers, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.
Power Rating
- Minimum Power
-
1000BHP
- Maximum Power
-
1100BHP
- Rated Speed
-
1800 rpm
Emission Standards
- Emissions
-
Non-certified
General
- Engine Configuration
-
V-8, 4-Stroke-Cycle Diesel
- Bore
-
170 mm (6.7 in)
- Stroke
-
190 mm (7.5 in)
- Displacement
-
34.5 L (2105 in³)
- Aspiration
-
Turbocharged Aftercooled
- Rotation from Flywheel End
-
Counterclockwise
Engine Dimensions - Approximate
- Width
-
1703 mm (67 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
-
4309 kg (9500 lb)
- Length
-
2462 mm (97 in)
- Height
-
1720 mm (68 in)
Standard Equipment:
- Air Inlet System
-
- Aftercooler core, corrosion resistant coated (air side)
- Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
- Turbocharger, rear mounted
- Jacket water aftercooled
- Control System
-
- Governor, RH, 3161 with self contained synthetic oil sump
- Air-fuel ratio control
- Mechanical speed control, without torque control
- Governor control
- Positive locking
- Cooling System
-
- Thermostats and housing
- Jacket water pump, centrifugal
- Flywheels And Flywheel Housing
-
- SAE No. 0 flywheel
- 151 flywheel teeth
- SAE No. 0 flywheel housing
- SAE standard rotation
- Fuel System
-
- Fuel filter, with service indicators, cartridge type with RH service
- Fuel transfer pump
- Instrumentation
-
- Instrument Panel, RH
- Engine oil pressure gauge
- Fuel pressure gauge
- Oil filter differential gauge
- Jacket water temperature gauge
- Service meter, electric
- Tachometer
- Lube System
-
- Crankcase breather, top mounted
- Oil cooler
- Oil filler
- Oil dipstick
- Oil pump
- Oil filter, cartridge type with RH service
- Shallow oil pan
- Fumes disposal (not installed)
- Mounting System
-
- Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
- Included on selected top level engines
- Power Take Off
-
- Accessory drive, upper RH
- Front housing, single sided
- Protection System
-
- Junction box
- Manual shutoff, RH
- Safety shutoff protection, energized to shutdown
- Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
- Water temperature
- Overspeed
- 3161 governor solenoid energized to shutdown
- General
-
- Vibration damper
- Lifting eyes
- Paint: Caterpillar yellow, with optional colors available at request
