Cat® 3406C Fire Pump Engine
The Cat® 3406C Industrial Diesel Fire Pump Engine is offered in ratings ranging from 218-359 bkW (292-482 bhp) @ 1750-2300 rpm. These ratings are non-certified and available for
...The Cat® 3406C Industrial Diesel Fire Pump Engine is offered in ratings ranging from 218-359 bkW (292-482 bhp) @ 1750-2300 rpm. These ratings are non-certified and available for global non-regulated areas. They are FM Approved and UL Listed. Additional 3406C ratings with or without radiators are available, but not FM approved or UL listed. Starting on demand is a must for a fire pump engine - always. Cat® fire pump engines have a reputation for reliable starts and long efficient service.
Power Rating
- Minimum Power
-
292BHP
- Maximum Power
-
482BHP
- Rated Speed
-
1750-2300 rpm
Emission Standards
- Emissions
-
Non-Certified. Available for global non-regulated areas. FM Approved, UL Listed
General
- Engine Configuration
-
Inline 6, 4-Stroke-Cycle Diesel
- Bore
-
137.2 mm (5.4 in)
- Stroke
-
165.1 mm (6.5 in)
- Displacement
-
14.6 L (893 in³)
- Aspiration
-
Turbocharged Aftercooled
- Compression Ratio
-
14.5:1
- Rotation from Flywheel End
-
Counterclockwise
- Cooling System - Capacity
-
32.2 L (34 qt)
- Lube System - Refill
-
34.1 L (36 qt)
Standard Equipment:
- Air Inlet System
-
- Dry or watercooled manifold and turbocharger
- Charging System
-
- Charging Alternator, 24 volt, 35 amp
- Control System
-
- Hydra-mechanical governor
- Cooling System
-
- Thermostats and housing
- Jacket water pump, gear driven, centrifugal
- Heat exchanger
- Expansion tank
- FM Required Raw Water Cooling Loops: 1.5" iron, horizontal or vertical, 1.5" 316 stainless steel, horizontal or vertical
- Optional Radiator, not UL listed or FM approved
- Exhaust System
-
- Exhaust manifold, water-cooled (wet) or dry
- Exhaust elbow, dry, 152 mm (6 in), 4 bolt flange
- Flywheels And Flywheel Housing
-
- SAE No. 1 flywheel
- SAE No. 1 flywheel housing
- SAE standard rotation
- Fuel System
-
- Fuel filter, LH
- Fuel transfer pump
- Primary fuel filter / water separator
- Instrumentation
-
- Instrument panel, LH
- Engine oil pressure gauge
- Fuel pressure gauge
- Water temperature gauge
- Service meter
- Lube System
-
- Crankcase breather
- Oil cooler
- Lube oil filter
- Oil filler in valve cover and dipstick, both RH
- Rear sump oil pan
- Oil filler in valve cover
- Dipstick
- Protection System
-
- Stop-Start System, automatic (compatible with NFPA 20 requirements, able to be energized from either of two battery sources and capable of manual starter actuation)
- General
-
- Vibration damper and guard
- Lifting eyes
- Paint - fire pump red, optional radiator painted black
