ATC Molded Case Circuit Breaker & Molded Case Switch Automatic Transfer Switch

ATC Molded Case Circuit Breaker & Molded Case Switch Automatic Transfer Switch

Cat® transfer switches are designed for a variety of standby power applications. They provide flexibility, reliability and value in a compact package. The open transition breaker-based Automatic Transfer Switch (ATS) ...
PDF Print Share

Technical Summary

Rating Range
30-1000A
Transfer Type
Open transition
Switch Type
Molded Case

Ratings

Control Power
30-1000A 2, 3, or 4 Pole, 100% Rated
System Voltage Application
120 - 600 Vac, 50/60 Hz
Withstand
100,000 amps withstand/closing/ interrupting at480 Vac
Applicable Testing
CSA C22.2 No. 178 certified
IBC 2006, CBC 2007 and OSHPD

Product Features

  • ATC-100, ATC-300+ or ATC-800 microprocessor-based controller
  • Mechanical (cable) and electrical interlocking to prevent paralleling of sources
  • Voltage and frequency sensing
  • Multiple field programmable time delays
  • Switch position indication
  • Source availability indication
  • Safe manual transfer under load
  • Source 1 and Source 2 auxiliary contacts
  • Programmable plant exerciser
  • System test pushbutton
  • Load Shed from emergency (ATC-800 only)
  • Mimic diagram
  • Mechanical (cable) and electrical interlocking to prevent paralleling of sources
  • Safe manual operation under full load with permanently affixed operating handle
  • Ambient temperature range: -40C to 40C (-40F to 104F)
  • Operating temperature range: -20C to 70C (-4F to 158F)
  • Operating humidity: up to 90%
  • Relative humidity (non-condensing)
  • Frequency sensing on Source 1 and 2
  • True RMS three phase voltage sensing on Source 1, Source 2 and load

Standard Equipment:

Optional Equipment:

    Available Options
    • Suitable for service entrance
    • Load sequencing contacts
    • Selectable automatic or non-automatic operation
    • Controller availability: ATC-100, ATC-300+,and ATC-800
    • Field selectable, multi ratio, control voltage transformer 50/60 Hz
    • Surge suppression
    • Multi-meter options available
    • Integral overcurrent protection
    • Space heaters
    • Remote communications
    • Communications for the ATC-300+ Controller via RS-232 or Modbus through an integrated RS-485 port
    • 2- or 4-position test switch
    Optional Delayed Transition Includes:
    • Pre-transfer signal with 1 N.O. and 1 N.C. contacts
    • Time delay neutral