G3512 1000kW Gas Generator Set

G3512 1000kW Gas Generator Set

360° Exterior View

PDF Print SHARE

Generator Set Specifications

Gas Standby Rating
1000 ekW @ 0.8pf
Fuel Type
Natural Gas
Emissions/Fuel Strategy
U.S. EPA Certified for Non-Emergency Stationary Genset
RPM
1800 rpm
Frequency
60 Hz
Compression Ratio
9.7
Displacement
3173in³

Engine Specifications

Engine Model
G3512
Displacement
3173in³
Aspiration
TA
Bore
6.7in
Stroke
7.5in

Generator Set Dimensions

Length
205.7in
Width
90in
Height
99.4in
Weight
27500lb

CAT G3512 Gas Engine

  • Robust high speed block design provides prolonged life and lower owning operationg costs
  • Designed for maximum performance on low pressure pipeline natural gas
  • Simple open chamber combustion system for reliability and fuel flexibility
  • Leading edge technology in ignition system and air/fuel ratio control for lower emission and engine efficiency
  • One electronic control module handles all engine functions: ignition, governing, air/fuel ratio control and engine protection

SR5 Generator

  • Designed to match performance and output characteristics of Caterpillar gas engines
  • Industry leading mechanical and electrical design
  • High efficiency

CAT electronic control system

  • Simple user friendly interface and navigation
  • Digital monitoring, metering and protection setting
  • Fully-featured power metering and protective relaying
  • Remote control and monitor capability options

EMCP4.3 Control Panel

  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirement
  • Expansion modules and site-specific programming for specific customer requirements

Cooling System

  • Designed to operate in standard ambient temperatures up to 43°C (110°F)
  • Contact your Cat Dealer for specific ambient and altitude capabilities

Emissions

  • EPA Certified for use in Emergency and Non-Emergency applications
  • Additional a NOx selectable genset is available to meets most worldwide emissions requirements down to 0.5 g/bhp-hr NOx level without aftertreatment

Proven System

  • Field proven in a wide range of applications worldwide
  • fully prototype tested
  • Certified torsional vibration analysis available

Full Range of Attachments

  • Wide range of bolt-on system expansion attachments
  • Factory designed and tested
  • Flexible packaging options for easy and cost effective installation

World Wide Product Support

  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

Standard Equipment:

Optional Equipment:

    Air Inlet
    • Mounting brackets and piping
    • Air cleaner with precleaner
    Control Panel
    • Local PC monitoring
    • Engine failure relay
    • Remote PC monitoring
    • Local alarm module
    • Remote annunciator
    Cooling
    • Remote radiator for JW and SCAC circuits, level switch included but not wired
    • Inlet/Outlet connections
    • Coolant level drain line with valves, fan with guard
    Circuit Breakers
    • 2000A 3 Pole, UL-100% Rated Masterpact Circuit Breakers
    • Frame mounting
    • S LSI, G LSIG, P LSIG-P, 4th Digit Type
    • Right, left, rear mounted
    • 1600A, 2000A 3 Pole, UL-100% Rated R-Frame Circuit Breakers
    • 100% rated, 3-pole (UL/CSA/IEC) 5th Digit Rating
    • EMCP 4.3
    • 3-pole (IEC 947-2 rated)
    • 1200A, 3 Pole, UL-100% Rated P-Frame Circuit Breakers
    Exhaust
    • 305 mm (12 in.) flange
    • Flexible fittings
    • 18, 25 dBA Attenuation
    • 305 mm (12 in.) muffler
    • 305mm (12 in) spark arresting muffler
    • 305 mm (12in.) elbow
    Fuel System
    • 3, 0-100 kPag, 4-20mA gas train pressure sensors
    General
    • US AID emblem
    • Special paint order
    • Digital diagnostic tool
    • Tool set
    Generator
    • Generator air filter
    • European bus bars
    • Low voltage extension box
    • Cable access box
    • Bearing temperature detectors
    Starting/charging
    • 20A, 24VDC battery charger
    • 24V starting motors
    • 45A, 24V charging alternator (requires engine driven pumps)