3516C Tier 4 Final

3516C Tier 4 Final

The 3516C HD generator set has been developed for a wide range of applications, from emergency standby installations such as healthcare and datacenters to continuously powering remote installations. The engines ...
PDF Print SHARE

Generator Set Specifications

Minimum Rating
1650 ekW
Maximum Rating
2500 ekW
Emissions/Fuel Strategy
U.S. EPA Certified
Voltage
480 to 13800 Volts
Frequency
60 Hz
Speed
1800 rpm
Duty Cycle
Standby, Mission Critical, Prime

Engine Specifications

Engine Model
3516C HD, ATAAC, V-16, 4-Stroke Water-Cooled Diesel
Bore
6.69in
Stroke
8.46in
Displacement
78in
Compression Ratio
14.7:1
Aspiration
TA
Fuel System
Electronic unit injection
Governor Type
ADEM™A4

Generator Set Dimensions

Length - Minimum
267.6in
Length - Maximum
277in
Width - Minimum
93.7in
Width - Maximum
101.2in
Height - Minimum
116.7in
Height - Maximum
118.9in
Dry Weight - Genset (minimum)
37200lb
Dry Weight - Genset (maximum)
40280lb

Cat Generator Set Package

  • Cat generator set packages have been fully prototype tested
  • Accepts 100% block load in one step and meets NFPA 110 loading requirements
  • Conform to ISO 8528-5 steady state and transient response requirements

Cat Diesel Engine

  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

SR5 Alternator

  • Superior motor starting capability minimizes need for oversizing alternator
  • Designed to match performance and output characteristics of Cat diesel engines
  • Robust Class H insulation

EMCP 4 Control Panel

  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirement
  • Expansion modules and site-specific programming for specific customer requirements

Cooling System

  • Designed to operate in standard ambient temperatures up to 50°C (122°F)
  • Contact your Cat Dealer for specific ambient and altitude capabilities

Certifications

  • IBC seismic certification
  • OSHPD pre-approval

One Safe Source

  • Components used in the generator set are selected at the design stage to provide optimum package performance
  • The generator set is fully assembled at a Caterpillar facility following our quality guidelines
  • Each generator set package is tested before leaving the Caterpillar facility
  • Cat product support, including dealer service, parts and warranty covers the entire Cat power system

World Wide Product Support

  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

Standard Equipment:

Optional Equipment:

    Control System
    • EMCP 4.3, EMCP 4.4
    Exhaust
    • Exhaust mufflers
    Air Inlet System
    • Dual element air cleaner
    • Single element filter
    Generator
    • Anti-condensation heater
    • Internal excitation (IE)
    • Oversize and premium generators
    • Permanent magnet excitation (PMG)
    Cooling System
    • Standard ambient radiators
    • Optional installed ATAAC radiators
    • Standard ambient ATAAC radiators
    • Coolant
    • Water level switch gauges
    • Optional installed radiators
    Power Termination
    • Circuit breakers, IEC compliant
    • Circuit breakers, UL listed
    Crankcase System
    • Explosion relief valves
    • No explosion relief valves
    • Ventilation system
    Exhaust System
    • Y-Adapters
    • Tier 4 clean emissions module
    • Flange and exhaust expanders
    • Flanges
    • Clean emission parts
    • Tier 4 clean emission MOD Kits
    • Tier 4 dosing cabinet
    • Exhaust offset
    • Mufflers
    • Elbows
    • Flexible fittings
    Control Panels
    • EMCP 4.3
    • EMCP 4.4
    • EMCP 4.2
    • Remote monitoring software
    • Digital I/O module
    • Generator temperature monitoring & protection
    • Load share module
    Mounting
    • IBC isolators
    • Rubber anti-vibration mounts
    • Spring-type vibration isolator
    Starting/charging
    • Battery chargers
    • Heavy-duty starting system
    • Oversize batteries
    • Jacket water heater
    • Air starting motor with control and silencer
    • Charging alternator
    Fuel System
    • Fuel Priming Pumps (Tier 4) - Manual or Electric
    • Primary Fuel Filter
    General
    • EU Certificate of Conformance (CE)
    • Enclosures: sound attenuated, weather protective
    • Automatic transfer switches (ATS)
    • CSA Certification
    • UL 2200 package
    • EEC Declaration of Conformity
    • Integral & sub-base fuel tanks
    • Integral & sub-base UL listed dual wall fuel tanks
    • The following options are based on regional and product configuration:
    • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
    • Special paint (Colors other than Caterpillar yellow or high performance paints)
    • US aid emblem
    Generators And Attachments
    • Thermostate for space heater
    • Differntial current transformers (DCT) 8.7 kV and 15 kV classes
    • High voltage: 12470, 13200, 13800 volts, 3 phase 1800 rpm,FW, PM, No. of Leads = 6, Pitch = .6667: 2700, 3000 Frame
    • Space heater kits
    • Generator conversion
    • Alternator air cleaner
    • Low / Medium voltage: 380, 440, 480, 600 volts, 3 phase 1800 rpm. RW, IE, No. of Leads = 6, Pitch = .6667: 1600 Frame
    • High voltage: 6300, 6600, 6900 volts, 3 phase 1800 rpm, FW, PM, No. of Leads = 6, Pitch = .6667: 2700, 3000 Frame
    • Differential current transformers (DCT)
    • Low / Medium voltage: 380, 416, 440, 480, 600, 2400, 4160 Volts, 3 Phase 1800 RPM, FW, PM, No. of Leads = 6, Pitch = .6667: 1600, 1800 Frame
    Instrumentation
    • Pyrometer and thermocouples
    Lubrication System
    • Oil level regulator
    • Prelube pumps
    • Lube oil in standard sump
    Mounting System
    • IBC vibration isolators
    • Puck style low efficiency isolators
    • Spring type vibration isolators
    Power Connections
    • Ground cables between generator and terminal box
    • Neutral ground connections
    • Center post busbar
    • 2700 Frame, four lead, four terminal
    • Low voltage circuit breakers
    • Rear power connections
    • Right side power connections
    • Left side power connections
    Special Tests / Reports
    • Standard engine test charge
    • generator test report
    • IBC certification
    • Fuel consumption test
    • Torsional vibration analysis reports
    • PGS test report @ 1.0 power factor
    • Generator set fuel consumption test
    • OSHPD certification
    • PGS test report @ 0.8 power factor
    • Canadian Standards Association certification
    Starting And Charging
    • Electric starting motors
    • Air starting motors
    • 24 Volt battery set - Dry
    • Engine barring device
    • Jacket water heaters
    • Air pressure regulator
    • 10, 20, 35 and 50 amp battery chargers
    • Starter cover
    Extended Service Coverage
    • Platinum, Gold and Silver coverage