Cat | 962 Wheel Loader | Caterpillar
The Cat 962 Wheel Loader brings premium performance with simple-to-use technologies as a standard offering, boosting operator efficiencies and delivering consistent high bucket fill factors resulting in increased productivity. Extended ...
Engine
- Maximum Power - 2,100 rpm - ISO 14396
- 269HP
- Engine Model
- Cat C7.1
- Maximum Power - 2,100 rpm - ISO 14396 - Metric
- 273HP
- Maximum Net Torque - 1,400 rpm - ISO 9249
- 867ft·lbf
- Maximum Net Power - 2,100 rpm - ISO 9249
- 251HP
- Maximum Net Power - 2,100 rpm - ISO 9249 - Metric
- 255mhp
- Maximum Net Power - 2,100 rpm - SAE J1349
- 251HP
- Maximum Gross Power - 2,100 rpm - SAE J1995
- 273HP
- Maximum Gross Power - 2,100 rpm - SAE J1995 - Metric
- 277mhp
- Maximum Gross Torque - 1,400 rpm
- 918ft·lbf
- Maximum Gross Torque - 1,400 rpm - SAE J1995
- 926ft·lbf
- Displacement
- 427in³
- Note
- Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards
- Note (1)
- The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
- Note (2)
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
Weights
- Operating Weight
- 44469lb
- Note
- Weight based on a machine configuration with Parallel lift z-bar linkage, Bridgestone 23.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, front manual differential/open rear a
Transmission
- Forward - 1
- 4.3mile/h
- Forward - 2
- 7.5mile/h
- Forward - 3
- 12mile/h
- Forward - 4
- 16mile/h
- Forward - 5
- 24.5mile/h
- Reverse - 1
- 4.3mile/h
- Reverse - 2
- 7.5mile/h
- Reverse - 3
- 16mile/h
- Note
- Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Operating Specifications
- Breakout Force
- 42489lbf
- Static Tipping Load - Full 37° Turn - With Tire Deflection
- 25869lb
- Static Tipping Load - Full 40° Turn - No Tire Deflection
- 27529lb
- Note
- For a machine configuration as defined under “Weight.”
- Note (1)
- Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Service Refill Capacities
- Fuel Tank
- 68.6gal (US)
- DEF Tank
- 4gal (US)
- Cooling System
- 14.3gal (US)
- Crankcase
- 5.5gal (US)
- Transmission
- 11.4gal (US)
- Differential - Final Drives - Front
- 11.4gal (US)
- Differential - Final Drives - Rear
- 11.4gal (US)
- Hydraulic Tank
- 25.6gal (US)
Hydraulic System
- Implement System - Maximum Pump Output at 2,340 rpm
- 85gal/min
- Implement System - Maximum Operating Pressure
- 4250psi
- Hydraulic Cycle Time - Total
- 9.4s
Dimensions - Standard Lift
- Height - Top of Hood
- 8.75ft
- Height - Top of ROPS
- 11.25ft
- Ground Clearance
- 1.08ft
- Wheel Base
- 10.92ft
- Overall Length - Without Bucket
- 23.83ft
- Hinge Pin Height at Carry Height
- 2.17ft
- Hinge Pin Height at Maximum Lift
- 13.83ft
- Lift Arm Clearance at Maximum Lift
- 11.33ft
- Rack Back - Maximum Lift
- 55°
- Rack Back - Carry Height
- 51°
- Width over Tires (Loaded)
- 9.33ft
- Tread Width
- 7ft
- Note
- All dimensions are approximate and based on machine equipped with 3.3 m3 (4.3 yd3 ) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires.
Dimensions - High Lift
- Height - Top of Hood
- 8.75ft
- Height - Top of ROPS
- 11.25ft
- Ground Clearance
- 1.08ft
- Wheel Base
- 10.92ft
- Overall Length - Without Bucket
- 25.17ft
- Hinge Pin Height at Carry Height
- 2.5ft
- Hinge Pin Height at Maximum Lift
- 14.75ft
- Lift Arm Clearance at Maximum Lift
- 11.83ft
- Width over Tires (Loaded)
- 9.33ft
- Tread Width
- 7ft
- Note
- All dimensions are approximate and based on machine equipped with 3.3 m3 (4.3 yd3 ) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires.
Sound
- Operator Sound Pressure Level - ISO 6396:2008
- 70dB(A)
- Operator Sound Pressure Level - ISO 6396:2008 ¹
- 69dB(A)
- Note
- ¹Operator Sound Pressure Level - Including countries that adopt the EU and UK Directives.
- Note (1)
- ¹Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons).