982 XE
The Cat® 982 XE Wheel Loader delivers increased fuel efficiency, premium performance with simple-to-use standard technologies to boost operator efficiencies, and lower maintenance costs. This machine is designed to meet ...
Engine
- Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011
- 404HP
- Engine Model
- Cat C13
- Note (1)
- Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
- Note (2)
- The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
- Engine Power @ 1,700 rpm – ISO 14396:2002
- 432HP
- Gross Torque @ 1,200 rpm – SAE J1995:2014
- 1636lb/ft
- Gross Power @ 1,700 rpm – SAE J1995:2014
- 436HP
- Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011
- 1515lb/ft
- Displacement
- 12.5L
- Engine Torque @ 1,200 rpm – ISO 14396:2002
- 1620lb/ft
- Note (3)
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
Weights
- Operating Weight
- 78264lb
- Note
- Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun
Bucket Capacities
- Bucket Range
- 4.8-17.2 m³ 6.25-22.5 yd³
Transmission
- Forward - 1
- 3.9mile/h
- Forward - 2
- 7.3mile/h
- Forward - 3
- 13mile/h
- Forward - 4
- 24.5mile/h
- Note
- Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
- Reverse - 1
- 4.4mile/h
- Reverse - 2
- 8.4mile/h
- Reverse - 3
- 17.4mile/h
Sound
- Note (1)
- * For machines in European Union countries and in countries that adopt the “EU Directives.”
- Note (2)
- European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
- With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
- 107
- With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
- 70dB(A)
- With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
- 110dB(A)
- With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
- 75
- With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
- 70dB(A)
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).
Operating Specifications
- Breakout Force
- 59060lbf
- Note (1)
- For a machine configuration as defined under Weight.
- Note (2)
- Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
- Static Tipping Load - Full 40° Turn - No Tire Deflection
- 22418kg
- Static Tipping Load - Full 40° Turn - With Tire Deflection
- 46526lb
Service Refill Capacities
- Cooling System
- 13.7gal (US)
- Crankcase
- 9.8gal (US)
- DEF Tank
- 5.5gal (US)
- Differential - Final Drives - Front
- 24.3gal (US)
- Differential - Final Drives - Rear
- 24.3gal (US)
- Fuel Tank
- 112.5gal (US)
- Hydraulic Tank
- 40.4gal (US)
- Transmission
- 20.3gal (US)
Hydraulic System
- Implement System - Maximum Operating Pressure
- 4975psi
- Implement System - Maximum Pump Output at 2,250 rpm
- 119gal/min
- Hydraulic Cycle Time - Total
- 10.1 seconds
Dimensions
- Note
- All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.
Dimensions - High Lift
- Centerline of Rear Axle to Edge of Counterweight
- 9.4ft
- Centerline of Rear Axle to Hitch
- 6.3ft
- Ground Clearance
- 1.4ft
- Height - Top of Exhaust Pipe
- 12.4ft
- Height - Top of Hood
- 10ft
- Height - Top of ROPS
- 12.6ft
- Hinge Pin Height at Carry
- 2.11ft
- Hinge Pin Height at Maximum Lift
- 16.1ft
- Lift Arm Clearance at Maximum Lift
- 13.4ft
- Overall Length - Without Bucket
- 29.11ft
- Tread Width
- 8.4ft
- Wheel Base
- 12.6ft
- Width over Tires (Loaded)
- 11.5ft
Dimensions - Standard Lift
- Centerline of Rear Axle to Edge of Counterweight
- 8.95ft
- Centerline of Rear Axle to Hitch
- 6.3ft
- Ground Clearance
- 428mm
- Height - Top of Exhaust Pipe
- 3736mm
- Height - Top of Hood
- 3036mm
- Height - Top of ROPS
- 3801mm
- Hinge Pin Height at Carry
- 2.7ft
- Hinge Pin Height at Maximum Lift
- 4741mm
- Lift Arm Clearance at Maximum Lift
- 3902mm
- Overall Length - Without Bucket
- 8597mm
- Tread Width
- 8.4ft
- Wheel Base
- 3800mm
- Width over Tires (Loaded)
- 11.5ft