950M Wheel Loader | Front Loader | Tier 4

950M Wheel Loader | Front Loader | Tier 4

360° Exterior View

The 950M Wheel Loader is equipped with built-in proven technologies to help meet your expectations for productivity and fuel efficiency. This wheel loader offers a standard lock up ...
PDF Print SHARE

Engine

Emissions
Tier 4/Stage IV
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Engine Model
Cat C7.1 ACERT
Peak Gross Torque - 1,300 rpm - ISO 14396
908ft·lbf
Maximum Power - 2,100 rpm - SAE J1995
250HP
Maximum Power - 2,100 rpm - ISO 14396 - Metric
253HP
Maximum Power - 2,100 rpm - ISO 14396
249HP
Maximum Net Power - 2,100 rpm - ISO 9249 - Metric
232HP
Maximum Net Power - 2,100 rpm - ISO 9249
230HP
Net Power - ISO 9249
230HP
Displacement
428in³
Maximum Net Power - 2,100 rpm - SAE J1349
230HP
Peak Gross Torque - 1,300 rpm - SAE J1995
911ft·lbf
Maximum Net Torque - 1,300 rpm
858ft·lbf

Engine - Tier 4 Final/Stage IV

Emissions
Tier 4/Stage IV

Weights

Operating Weight
42357lb
Note
Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering,

Buckets

Bucket Capacities
2.5-9.2 m³ (3.3-12.0 yd³)

Dimensions - Standard Lift

Rack Back - Carry Height
49 degrees
Rack Back - Maximum Lift
59 degrees
Rack Back at Ground
36 degrees
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Hinge Pin Height at Maximum Lift
13.25ft
Hinge Pin Height at Carry Height
2.08ft
Height - Top of ROPS
11.33ft
Height - Top of Hood
8.83ft
Height - Top of Exhaust Pipe
11.17ft
Centerline of Rear Axle to Hitch
5.5ft
Ground Clearance
1.17ft
Centerline of Rear Axle to Edge of Counterweight
6.33ft
Lift Arm Clearance at Maximum Lift
10.75ft
Maximum Width - Over Tires - Loaded
9.25ft
Overall Length - Without Bucket
22.67ft
Tread Width
7ft
Wheel Base
11ft

Dimensions - High Lift

Rack Back at Ground
40 degrees
Rack Back - Carry Height
49 degrees
Rack Back - Maximum Lift
59 degrees
Tread Width
7ft
Wheel Base
11ft
Overall Length - Without Bucket
24.58ft
Maximum Width - Over Tires - Loaded
9.25ft
Lift Arm Clearance at Maximum Lift
11.92ft
Hinge Pin Height at Maximum Lift
14.83ft
Hinge Pin Height at Carry Height
2.58ft
Height - Top of ROPS
11.33ft
Height - Top of Hood
8.83ft
Height - Top of Exhaust Pipe
11.17ft
Ground Clearance
1.17ft
Centerline of Rear Axle to Hitch
5.5ft
Centerline of Rear Axle to Edge of Counterweight
6.33ft
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

Bucket Capacities

Bucket Range
2.5-9.2 m³ (3.3-12.0 yd³)

Sound

With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
75 dB(A)*
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
70dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
107dB(A)
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**
69dB(A)
Note (1)
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Note (2)
**For machines in European Union countries and in countries that adopt the ?EU Directives.?
Note (3)
***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**
104 LWA***

Hydraulic System

Implement Pump Type
Variable Axial Piston
Hydraulic Cycle Time - Total
8.9s
Implement System - Maximum Pump Output at 2,150 rpm
76gal/min
Implement System - Maximum Operating Pressure
4250psi

Service Refill Capacities

Transmission
11.4gal (US)
Hydraulic Tank
33gal (US)
Fuel Tank
72.6gal (US)
Differential - Final Drives - Rear
11.4gal (US)
Differential - Final Drives - Front
11.4gal (US)
DEF Tank
4.2gal (US)
Crankcase
5.8gal (US)
Cooling System
15.6gal (US)

Transmission

Reverse - 3
16mile/h
Reverse - 2
7.5mile/h
Reverse - 1
4.3mile/h
Forward - 4
16mile/h
Forward - 3
12mile/h
Forward - 1
4.3mile/h
Forward - 2
7.5mile/h
Forward - 5
24.5mile/h
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.

Operating Specifications

Breakout Force
40690lbf
Static Tipping Load - Full 40° Turn - With Tire Deflection
24262lb
Static Tipping Load - Full 40° Turn - No Tire Deflection
25926lb
Note (1)
For a machine configuration as defined under ?Weight.?
Note (2)
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Dimensions

Hinge Pin Height at Carry Height
25in
Hinge Pin Height at Maximum Lift
159in
Ground Clearance
14in
Centerline of Rear Axle to Edge of Counterweight
76in
Height - Top of Exhaust Pipe
90in
Centerline of Rear Axle to Hitch
66in
Height - Top of Hood
106in
Height - Top of ROPS
92in
Wheel Base
132in
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Maximum Width over Tires (loaded)
111in
Overall Length (without bucket)
272in
Tread Width
84in

Reliability

  • Cat® C7.1 ACERT™ engine and automatic Cat Regeneration System offers increased power density with a combination of proven electronic, fuel and air systems.
  • Utilizing rigorous component design and machine validation processes results in unmatched reliability, durability and high uptime.

Durability

        

  • Tough countershaft powershift transmission and axles handle extreme applications.
  •     

  • Full flow hydraulic filtration system with additional loop filtration improves hydraulic system robustness and component life.

Productivity

        

  • Engine power increased by approximately 16% improves machine performance and response (compared to H Series).
  •     

  • Lock-up clutch torque converter, combined with lock-to-lock shifting, delivers smooth shifts, fast acceleration and speed on grade.
  •     

  • Optimized Z-bar linkage provides high breakout force at ground level along with excellent –0°/+5° parallelism for precise work tool control.
  •     

  • Easy-to-load Performance Series Buckets feature a wider mouth and curved side plates that improve material retention (fill factor) and decrease cycle times.
  •     

  • On-the-go disc-type front manual differential locks (front and rear fully automatic option).
  •     

  • Optional auxiliary counterweight option offers slightly higher payload capability for loose aggregate rehandling.*

*Optional configurations and equipment may vary from region to region and requires conformance to Caterpillar payload policy. Consult your dealer or Caterpillar representative for details.

Fuel Efficiency

        

  • Up to 10% more fuel efficient than K Series and up to 25% more fuel efficient than H Series loaders.**
  •     

  • Power dense ACERT engine burns less fuel by providing power and torque when needed.
  •     

  • Standard productive Economy Mode provides maximum fuel savings with minimal productivity impact.

**Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.

Ease of Operation

        

  • Best-in-class operator environment provides unmatched comfort, visibility, and efficiency.
  •     

  • Steering wheel (E-H joystick steering option).
  •     

  • Intuitive, ergonomic controls and touch screen multifunction display keep operators focused on their work.
  •     

  • Ride control system with dual accumulators provides excellent ride quality and lowers cab vibrations.

Safety

        

  • Excellent cab access with wide door, remote door opening option and stair-like steps.
  •     

  • Floor to ceiling windshield, large mirrors with integrated spot mirrors and rear vision camera provide industry leading all-around visibility.

Serviceability

        

  • One-piece tilting hood with side and rear doors; hydraulic and electrical service centers make access fast and easy.
  •     

  • Safe, ground level access to fuel fill and daily maintenance points means less servicing time is required.
  •     

  • Optional, fully integrated Cat Autolube system provides full lube system monitoring and diagnostic test visibility.

Cat Connect Technology

        

  • Monitor, manage and enhance job site operations.
  •     

  • Cat LINK Technologies: VisionLink® enables owners to access data wirelessly to monitor machine health, utilization and location.
  •     

  • Cat DETECT Technologies: Integrated rear vision camera enhances visibility behind machine to help operators work safely. Optional Cat Rear Object Detection increases operator awareness of the working environment which enhances site safety.
  •     

  • Cat PAYLOAD Technologies: Optional Cat Production Measurement 2.0 brings simple and accurate on-the-go payload scale allowing operators to deliver exact loads and work more efficiently. Advanced Productivity subscription provides comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.

Standard Equipment:

Optional Equipment: