770G Off-Highway Truck

Operating Specifications

Nominal Payload Class (100%)

42.1ton (US)

Top Speed - Loaded

45.8mile/h

Target Payload (100%)

42.1ton (US)

Maximum Working Payload (110%)

46.3ton (US)

Maximum Allowable Payload (120%)*

50.5ton (US)

Body Capacity - SAE 2:1

32.9yd³

Note (1)

*Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.

Note (2)

Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight.

Engine

Engine Model

Cat® C15

Rated Engine Speed

1700r/min

Gross Power - SAE J1995

515HP

Net Power - SAE J1349

477HP

Net Power - ISO 9249

477HP

Net Power - 80/1269/EEC

489HP

Net Power - ISO 14396

508HP

Net Torque - SAE J1349

1834ft·lbf

Number of Cylinders

6

Bore

5.4in

Stroke

6.7in

Displacement

927.6in³

Note (1)

Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard.

Note (2)

Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).

Note (3)

No engine derating required up to 3000 m (9,843 ft) altitude.

Note (4)

Meets Japan Small Volume Exemption.

Emissions

Meets U.S. EPA Tier 4 and EU Stage V emission standards.

Weights - Approximate

Target Gross Machine Operating Weight

157000lb

Target Gross Machine Weight

157000lb

Chassis Weight

55948lb

Body Weight

17306lb

Note (1)

Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires.

Note (2)

Body weight is the standard Dual Slope body with no liner and will vary depending on configuration.

Transmission

Forward - 1

7.4mile/h

Forward - 2

10.1mile/h

Forward - 3

13.8mile/h

Forward - 4

18.5mile/h

Forward - 5

25.1mile/h

Forward - 6

33.8mile/h

Forward - 7

45.8mile/h

Reverse

8.8mile/h

Note

Maximum travel speeds with standard 18.00R33 (E4) tires.

Final Drives

Differential Ratio

1.92:1

Planetary Ratio

4.80:1

Total Reduction Ratio

9.26:1

Brakes

Brake Surface - Front

216in²

Brake Surface - Rear

6235in²

Brake Standards

ISO 3450:2011

Note

Target gross machine operating weight is 71 214 kg (157,000 lb).

Body Hoists

Pump Flow - High Idle

118gal/min

Relief Valve Setting - Raise

2750psi

Relief Valve Setting - Lower

500psi

Body Raise Time - High Idle

7.5s

Body Lower Time - Float

10s

Body Power Down - High Idle

10s

Capacity - Dual Slope - 100% Fill Factor

Struck

23.01yd³

Heaped (SAE 2:1)*

32.9yd³

Note (2)

*ISO 6483:1980.

Note (1)

Contact your local Cat dealer for body recommendation.

Capacity - Flat Floor - 100% Fill Factor

Struck

23.01yd³

Heaped (SAE 2:1)*

32.9yd³

Note (2)

*ISO 6483:1980.

Note (1)

Contact your local Cat dealer for body recommendation.

Weight Distributions - Approximate

Front Axle - Empty

49%

Front Axle - Loaded

34%

Rear Axle - Empty

51%

Rear Axle - Loaded

66%

Suspension

Empty Loaded Cylinder Stroke Front

9.2in

Empty Loaded Cylinder Stroke Rear

5.9in

Rear axle - Oscillation

8.9°

Service Refill Capacities

Fuel Tank

140gal (US)

Cooling System

33gal (US)

Crankcase

17gal (US)

Differential - Final Drives

47gal (US)

Steering Tank

14.5gal (US)

Steering System - Including Tank

23gal (US)

Brake/Hoist Hydraulic Tank

38gal (US)

Brake Hoist System

60gal (US)

Torque Converter - Transmission System

17gal (US)

DEF Tank

6gal (US)

Steering

Steering Standards

ISO 5010:2007

Steer Angle

40.5°

Turning Diameter - Front

57.7ft

Turning Circle - Clearance Diameter

66.6ft

Note

Target gross machine operating weight is 71 214 kg (157,000 lb).

Tires

Standard Tire

18.00R33 (E4)

Note (1)

Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.

Note (2)

Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection.

ROPS

ROPS Standards

Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.

FOPS Standards

Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.

Sound

Sound Standards (1)

Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.

Sound Standards (2)

Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A).

Sound Standards (3)

Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used.

Dimensions

Height - Top of ROPS

12.7ft

Overall Body Length

26.8ft

Inside Body Length

18.5ft

Overall Length

28.9ft

Wheel Base

13ft

Rear Axle - Tail

8.5ft

Ground Clearance

1.6ft

Dump Clearance

1.7ft

Loading Height - Empty

10.3ft

Inside Body Depth - Maximum

4.6ft

Overall Height - Body Raised

27.1ft

Operating Width

15.7ft

Centerline Front Tire Width

10.2ft

Engine Guard Clearance

1.8ft

Outside Body Width

12.9ft

Inside Body Width

11.9ft

Front Canopy Height

13.5ft

Rear Axle - Clearance

1.8ft

Centerline of Rear Dual Tire Width

8.3ft

Overall Tire Width

12.1ft