140 GC Motor Grader

140 GC Motor Grader

360 Exterior View

The Cat® 140 GC motor grader is easy to own and operate. It’s easy on your wallet too. A demand fan and standard ECO mode reduces fuel consumption while open ...
PDF Print SHARE

Engine

Engine Power (ISO 14396)
196HP
Bore
4.1in
Derating Altitude
9842ft
Displacement
427.8in³
Emissions
U.S. EPA Tier 4 Final/EU Stage V
Engine Model
Cat 7.1
Engine RPM
2,200
Standard Capability
109°F
High - Ambient Capability
122°F
Maximum Torque - ISO 9249
616lb/ft
Stroke
5.3in
Torque Rise - ISO 9294
40%
Number of Cylinders
6
Note (1)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
Note (2)
Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Note (3)
Power as declared per ISO 14396
Engine Power AWD (ISO 14396)
196HP

Weight

Weight (Stage V)*
38912lb
Weight (Tier 4 Final)**
40488lb
All-wheel Drive Weight (AWD) (Tier 4 Final)**
42119lb
All-Wheel Drive Weight (AWD) (Stage V)*
40543lb

Moldboard

Blade Width
12ft
Arc Radius
16.3in
Blade Height
24in
Cutting Edge Width
6in
End Bit
6in
Throat Clearance
4.4in

Air Conditioning System

Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.

Weights

Note
* Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment.

Dimensions

Width All Wheel Drive (AWD)
99.3in
Length of Machine*
406.7in
Maximum Height
132.4in
Width
95.6in
Note
*Typically equipped with push block and ripper.

Blade Range

Circle Center Shift Left
29.6in
Circle Center Shift Right
28.7in
Maximum Depth of Cut
28.1in
Maximum Lift Above Ground
18.7in
Maximum Shoulder Reach Left
74.3in
Maximum Shoulder Reach Right
71.3in
Moldboard Side Shift Left
25.6in
Moldboard Side Shift Right
20.7in
Blade Tip Range Backward
5
Blade Tip Range Forward
40

Service Refill Capacities

Fuel Tank
78gal (US)
Circle Drive with Slip Clutch
2gal (US)
Circle Drive without Slip Clutch
0.5gal (US)
Cooling System
40l
Engine Crankcase
5.5gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Only)
4.2gal (US)
Hydraulic System
11.9gal (US)
Transmission
4.8gal (US)

BUILT TO PERFORM

  • Increase your fuel economy up to 5% with the standard ECO mode.
  • The on-demand fan reduces fuel consumption and under-hood heat for longer component life.
  • Improve productivity with the Electronic Throttle Control which matches engine power and torque to application requirements.
  • The powershift transmission with torque converter and machine balanced design ensures that you get full drawbar power to the ground with the Cat C7.1 engine.
  • The all-wheel drive (AWD) option assists with traction and maneuvering in loose material. The increased power with all wheel drive handles rough terrain with extra traction for better productivity.
  • The hydraulic system offers a multifunction capability for precise and predictable performance resulting in a more consistent grade.
  • Increase your maneuverability with the articulation hitch to give you a shorter turning radius.
  • The Digital Blade Slope Meter option shows you the grade without relying on manual grade checkers to keep your work site more productive and safer.
  • Product Link™ provides location, machine hours, fuel usage, productivity, idle time, diagnostic codes, and other machine data on demand through the VisionLink® online interface, which helps you improve jobsite efficiency with lower operating costs.

WORK IN COMFORT

  • Choose your comfort level in the cab with standard, mechanical suspension or air suspension seat.
  • Easily adjust the control console and steering wheel.
  • The high capacity Heating, Ventilation and Air Conditioning (HVAC) system option circulates fresh air, prevents dust entry and keeps windows from fogging.
  • Easily add a radio to the cab using the built-in mounting location option.

RELIABLE, WHATEVER THE ENVIRONMENT

  • The drawbar circle moldboard stays factory tight providing precision grading pass after pass.
  • The machine structure is built for a long life. It’s designed to use several types of work tools, such as a front blade.
  • A slip clutch option protects the circle drive if the machine strikes an immovable object.
  • The front axle maximizes bearing life while also minimizing maintenance.
  • Reduce daily greasing requirements and costly repairs to your circle and pinion with the Circle Saver option.

SAFELY HOME EVERY DAY

  • See what’s behind you with the rear camera option. The dedicated display can always be on to ensure a safe work environment.
  • Optional dual front cameras offer more visibility to you while roading and working with the blade.
  • In the event of an engine stall, count on the secondary steering system option to help stop the machine safely.
  • Use three points of contact when entering and exiting the machine with strategically placed walk ways and grab rails.
  • Ground level engine shut-off switch stops all fuel to the engine when activated and shuts down the machine.
  • See the rear of your machine with side and rearview mirrors.
  • Work past sundown using the strategically placed lights for night time visibility.

SIMPLIFIED MAINTENANCE

  • Filters, such as fuel, engine air, and oil filters, are grouped together for easy access and preventative maintenance.
  • The standard drawbar circle moldboard increases durability using hardened circle teeth and replaceable wear inserts to help sustain factory tightness.
  • Hydraulic brakes are well oiled to keep them maintenance free.
  • The standard bottom guard shields the transmission and filter. Optional guarding underneath the cab protects your machine from damage in demanding applications.
  • Spend less time cleaning the cooling system with the reversing fan option, which reduces costs when cleaned once per week for more uptime.
  • Remote Troubleshoot connects you to a dealer service pro to help solve your problem and quickly get you to work.
  • Remote Flash works around your schedule to ensure your machine’s software is up to date for optimal performance.
  • S·O·Sports are available for simplifying maintenance and allowing for quick, easy extraction of fluid samples for analysis.

EXPAND YOUR CAPABILITIES

  • Improve the performance and efficiency of your machine with the standard or heavy-duty push block and counterweight options.
  • Ripper and scarifier options are available to assist with grading hard ground.
  • The front lift group option is ready for attachments like the straight front blade.
  • Expand your machine’s capabilities with the tow hitch.
  • For more road coverage, add a moldboard extension to add 605 mm (24 in).

Standard Equipment:

Optional Equipment:

    Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
    Cab
    • Mechanical Suspension Seat
    • Air Suspension Seat
    • ROPS/FOPS
    • Heating/Cooling Cab System
    • Rear Wiper
    • Canopy
    • Cab Plus
    • Rear Window Screen
    • Front Wipers
    • Digital Blade Slope Meter
    Drawbar Circle Moldboard
    • Circle Drive Slip Clutch
    • Circle Saver
    Power Train
    • Reversing Fan
    • All-Wheel Drive (AWD)
    Safety
    • Rearview camera
    • Secondary steering system
    • Front View Camera
    Versatility
    • Scarifier
    • Counterweight
    • Push Block
    • Front Lift Group
    • Snow Wing
    • Front Blade