14 Motor Grader
Cat® Motor Graders continue the Caterpillar tradition of being the industry standard in heavy construction, road building, and governmental applications. The 14 (14M3) features a host of integrated technology solutions ...
Engine
- Base Power (1st Gear) - Net
- 238HP
- Engine Model
- Cat C13
- Bore
- 5.1in
- Stroke
- 6.2in
- Speed at Rated Power
- 1,850 rpm
- Standard - Fan Speed - Maximum
- 1,600 rpm
- Note (5)
- Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
- Note (4)
- Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
- Standard - Fan Speed - Minimum
- 550 rpm
- Note (1)
- Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
- Maximum Altitude - Full Power (Tier 2)
- 12049ft
- Maximum Altitude - Full Power (Tier 3)
- 14349ft
- Emissions
- Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
- Maximum Torque - VHP Plus
- 1137lb/ft
- Maximum Altitude - Full Power
- 13900ft
- Torque Rise
- 41%
- Note (2)
- Optimized VHP Plus is standard for the 14M3.
- Standard Capability
- 122°F
- Note (3)
- Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
- Displacement
- 763in³
- Number of Cylinders
- 6
Weights
- Operating Weight - Typically Equipped
- 57250lb
- Note
- *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
- Gross Vehicle Weight - Base* - Rear Axle
- 36994lb
- Gross Vehicle Weight - Typically Equipped - Front Axle
- 15245lb
- Gross Vehicle Weight - Typically Equipped - Rear Axle
- 42005lb
- Gross Vehicle Weight - Typically Equipped - Total
- 57250lb
- Gross Vehicle Weight - Base* - Front Axle
- 13994lb
- Gross Vehicle Weight - Base* - Total
- 50980lb
Moldboard
- Blade Width
- 14ft
- Arc Radius
- 16.3in
- Throat Clearance
- 4.6in
- Blade Height - Without Cutting Edge
- 23in
- Blade Width - Without End Bits
- 164in
- Blade Height - With Cutting Edge
- 24.9in
- Blade Width - With End Bits
- 169in
Blade Range
- Maximum Depth of Cut
- 23.3in
- Blade Tip Range - Forward
- 40°
- Maximum Shoulder Reach Outside of Tires - Left
- 73.6in
- Moldboard Sideshift - Left
- 29.1in
- Moldboard Sideshift - Right
- 31.1in
- Maximum Shoulder Reach Outside of Tires - Right
- 78.9in
- Blade Tip Range - Backward
- 5°
- Circle Centershift - Right
- 20.5in
- Maximum Lift Above Ground
- 16.5in
- Circle Centershift - Left
- 25.6in
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
Service Refill Capacities
- Fuel Tank
- 109.9gal (US)
- Cooling System
- 15.9gal (US)
- Circle Drive
- 1.8gal (US)
- Hydraulic System
- 33gal (US)
- Diesel Exhaust Fluid Tank (Tier 4 Only)
- 5.8gal (US)
- Transmission and Differential
- 23.5gal (US)
Frame
- Front Axle - Total Oscillation per Side
- 32°
- Front Axle - Wheel Lean - Left/Right
- 17.1°
- Circle - Outer Diameter
- 71.7in
TECHNOLOGY THAT GETS WORK DONE
- Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematically when grader stabilizes.
- Optional Cat GRADE with Cross Slope helps maintain desired cross slope by automatically controlling one side of the blade.
- Optional Cat AccuGradeâ„¢ uses positioning and guidance technologies, machine sensors, and automatic blade control to help get to grade faster, easier, and more efficiently.
- Optional Auto Articulation allows you to articulate automatically while steering in tight spaces or around curves, obstacles, and turnarounds.
MOVE MORE, BURN LESS
- Cat C13 engine meets U.S. EPA Tier 4 Final/EU Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent emission standards, depending on emission standards of specific country.
- Standard Economy Mode can be turned on to limit maximum engine speed which helps reduce fuel consumption.
- Standard VHP Plus provides ideal amount of power in all gears.
- Standard Automatic Differential Lock unlocks differential during a turn and re-locks when straight for easier operation and improved power train protection.
MORE CONTROL AND EFFICIENCY
- Load-sensing system and advanced electro hydraulics give operator superior implement control and hydraulic performance.
- Proportional Priority Pressure-Compensating valves have different flow rates for head and rod ends of cylinder so machine responds consistently and predictably.
- Balanced hydraulic flow is proportioned to ensure all implements will operate simultaneously without slowing engine or speed of some implements.
DESIGNED FOR OPERATORS
- Simple, intuitive joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue.
- Optional Advanced Control Joysticks allow operator to control automated grading solutions efficiently and safely without removing hands from the joysticks.
- Selectable blade lift modes – Fine, Normal, or Coarse – allow operator to match application requirements.
- Articulation Return-to-Center automatically returns machine to a straight frame position from any angle with the touch of a button.
BUILT-IN SAFETY FEATURES
- Optional rear vision camera enhances sight to rear of machine.
- Electrical disconnect and engine shutoff switches are ground level.
- Operator Presence System keeps parking brake engaged and hydraulic implements disabled until operator is seated and machine is ready for operation.
- Hydraulic Lockout disables all implement functions while still providing machine steering control – especially useful while roading.
- Optional seat belt indicator promotes safe operating habits.
SAVE MAINTENANCE TIME
- Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.
- Shim less Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.