350 Hydraulic Excavator
The Cat® 350 is at the top of its class for productivity. With low owning and operating costs and easy-to-use Cat technology, the excavator will help you get tons of ...
Engine
- Net Power - ISO 9249
- 413HP
- Engine Model
- C9.3 B
- Bore
- 5in
- Stroke
- 6in
- Displacement
- 568in³
- Biodiesel Capability
- Up to B20
- Emissions
- Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Note (1)
- Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time
- Note (2)
- All Cat nonroad U.S. EPA Tier 4 Final, EU Stage V, Japan 2014, Korea Tier 5, India CEV Stage V, and China Nonroad Stage IV diesel engines are required to use ULSD (ultra-low sulfur diesel with 15 ppm of sulfur or less) or ULSD blended with the following l
Weights
- Operating Weight
- 105100lb
Working Ranges & Forces
- Maximum Digging Depth
- 26.11ft
- Boom
- Reach 6.9m(22'8")
- Stick
- R3.9m (12'10")
- Bucket
- GDC 3.08m3 (4.03 yd3)
- Maximum Reach at Ground Level
- 39.8ft
- Maximum Cutting Height
- 35.1ft
- Maximum Loading Height
- 24.3ft
- Minimum Loading Height
- 7.2ft
- Maximum Depth Cut for 2440 mm (8 ft) Level Bottom
- 26.6ft
- Maximum Vertical Wall Digging Depth
- 19.2ft
- Bucket Digging Force - ISO
- 60160lbf
- Stick Digging Force - ISO
- 41090lbf
Hydraulic System
- Main System - Maximum Flow
- 206gal/min
- Maximum Pressure - Equipment
- 5076psi
- Maximum Pressure - Equipment - Lift Mode
- 5511psi
- Maximum Pressure - Travel
- 5076psi
- Maximum Pressure - Swing
- 3727psi
Swing Mechanism
- Swing Speed
- 7.94r/min
- Maximum Swing Torque
- 139275ft·lbf
Service Refill Capacities
- Fuel Tank Capacity
- 179.6gal (US)
- Cooling System
- 12.7gal (US)
- Engine Oil
- 8.5gal (US)
- Swing Drive
- 4gal (US)
- Swing Drive - Each
- 4gal (US)
- Final Drive - Each
- 3.2gal (US)
- Hydraulic System - Including Tank
- 145.3gal (US)
- Hydraulic Tank
- 57.3gal (US)
- DEF Tank
- 21.1gal (US)
Dimensions
- Boom
- Reach 6.9m(22'8")
- Stick
- R3.9m (12'10")
- Bucket
- GDC 3.08m3 (4.03 yd3)
- Shipping Height - Top of Cab
- 10.8ft
- Handrail Height
- 11.2ft
- Shipping Length
- 39.2ft
- Tail Swing Radius
- 12.4ft
- Counterweight Clearance
- 4.5ft
- Ground Clearance
- 1.8ft
- Track Length
- 17.9ft
- Track Length to Center of Rollers
- 14.4ft
- Track Gauge
- 9ft
- Transport Width - 600 mm (24”) Shoes
- 10.11ft
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes.
LATEST FEATURES
- Continuously improved user interface allows for intuitive navigation, minimizing performance interruption with the easy-to-use touchscreen menu.
- Identify apps quickly with a grid list view, abbreviated app names, and categorized menu options.
- A new notification center keeps important information visible to the operator, and displays messages without shrinking the camera view.
- Color coded notifications set critical messages apart from the rest.
- Use the in-monitor QR code to learn about machine technology and features through a full suite of "hot-to" videos.
- Operator Coaching is an in-cab system that recognizes specific opportunities for operators to be more productive and prevent unnecessary machine wear and tear.
- After detecting inefficient or restricted actions, the system alerts the operator and provides insight into the inefficiency and steps to improve.
- Paired with a VisionLink Productivity subscription, this information and other Operator Coaching insights can be viewed from anywhere.
- Standard integrated vehicle health management system alerts the operator with service guidance and parts needed to enhance uptime.
- Optional Cat Detect - People Detection helps the operator with service guidance and parts needed to enhance uptime.
- Enhance visibility to make service work easier and safer with optional inspection lighting.
Cab Monitor Improvements
Operator Coaching
Not all features are available in all regions. Please check with your local Cat dealer for specific offering availability in your area.Build Number: 06C
Boost Efficiency And Productivity
- Boost productivity up to 45 percent with optional Cat Grade technology.
- 2D Grade indicates depth and slope on the monitor with auditor alerts.
- Grade Assist helps you stay on grade – simply and effortlessly – with single-lever digging.
- Automatically stop excavator swing at operator-defined setpoints in truck loading and trenching applications with Swing Assist, which will help you use less effort and consume less fuel.
- Cat Payload onboard weighing helps you achieve precise load targets to improve your operating efficiency. Pick up a load of material – with either a bucket or grapple – and get a real-time weight estimate without even swinging.
- Combine Payload with VisionLink® and remotely manage your production targets. The monitor's USB port lets you download results from one shift all the way up to 30 days of work so you can manage your progress without needing an internet connection or VisionLink subscription.
- Upgrade to Cat Grade with Advanced 2D and create and edit grade designs with ease on a second high-resolution 254 mm (10 in) touchscreen monitor.
- Upgrade to Cat Grade with 3D and create and edit designs with ease and see the front linkage's full range of motion on a second high-resolution 254 mm (10 in) touchscreen monitor.
- Know the excavator's exact position relative to GPS and GLONASS systems. The machine automatically compensates for excavator pitch and roll caused by sloping ground conditions.
- All Cat Grade systems are compatible with radios and base stations from Trimble, Topcon, and Leica.
- Already invested in a grade infrastructure? You can install grade systems from Trimble, Topcon, and Leica onto the machine.
- Remote troubleshoot connects you to a dealer service pro to help solve your problem and quickly get you to work.
- Remote flash works around your schedule to ensure your machine's software is up to date for optimal performance.
- Standard Product Link™ provides location, machine hours, fuel usage, productivity, idle time, diagnostic codes, and other machine data on demand through VisionLink online interface, helping you improve jobsite efficiency with lower operating costs.
Work In Comfort
- Choose between Deluxe and Premium cabs – both with automatic climate control.
- Deluxe cab comes with heated seat to keep you warm.
- Premium cab comes with heated and ventilated seat for year-round comfort.
- Tilt-up console enables easy entry and exit.
- Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles.
- Use the standard radio’s USB ports and Bluetooth® technology to connect to personal devices and make hands-free calls.
Built For Rugged Conditions
- The reinforced swing bearing, along with stress-relieved boom and stick, enables the 350 to take on tough work over and over again.
- Work up to 4500 m (14,764 ft) above sea level.
- Standard high-ambient temperature capability is 52°C (125°F). Standard cold start capability is -18°C (0°F); -32°C (-25°F) cold start capability is an available option.
- Automatic hydraulic oil warmup gets you to work faster in cold temperatures and helps prolong the life of components.
- Three levels of filtration protect the engine from dirty diesel fuel.
- Grease sealed between track pins and bushings reduces travel noise and prevents debris from entering to increase undercarriage life.
- Standard built-in protection includes bottom, travel motor,and swivel guards.
- The sloped track frame prevents mud and debris accumulation, helping reduce risk of track damage.
High Performance, Low Fuel Consumption
- Powerful digging force and strong swing torque enable the use of large buckets up to 3.2 m3 (4.2 yd3) for class-leading productivity.
- Compared to the Cat 349-07, the 350 consumes up to 13 percent less fuel for lower operating costs and greater profit potential.
- Match the excavator to the job with three power modes – Smart, Power, and Eco. Smart mode automatically matches engine and hydraulic power to digging conditions, providing maximum power when needed and reducing power when it isn’t to help save fuel. Power mode is maximum power all the time. Eco mode reduces engine speed and keeps it constant to reduce fuel consumption.
- Valve priority puts hydraulic pressure and flow where you command it to go for fast light- to medium-load cycle times.
Simple To Operate
- Start the engine with a push button; use a Bluetooth key fob or Operator ID passcode.
- Program each joystick button – including power mode, response, and pattern – using Operator ID; the machine will remember what you set each time you go to work.
- Trouble cuting through tough material? Auto dig boost gives you an automatic power increase of 8 percent when you need it for better bucket penetration, shorter cycle times, and greater payloads.
- Need more lift during your shift? Auto heavy lift gives you 8 percent more power exactly when you need it for as long as you need it.
- Make moving the excavator much easier with optional Cat Stick Steer. Simply push a button and use one hand to travel and turn instead of both hands or feet on levers and pedals.
- Navigate quickly on the standard high-resolution touchscreen monitor or with the aid of the jog dial control.
- Protect your hammer from overworking. Auto hammer stop warns you after 15 seconds of continuous firing and then automatically shuts it off after 30 seconds – all to prevent wear and tear on the attachment and excavator.
- Not sure how a function works or how to maintain the excavator? Always have the operator’s manual at your fingertips in the touchscreen monitor.
Enhanced Safety
- Keep your excavator secure with Operator ID. Use your PIN code on the monitor to enable the push button starting feature.
- A travel direction indicator helps operators know which way to activate the travel levers.
- A ground-level shutoff switch stops all fuel to the engine when activated and shuts down the machine.
- Enjoy great visibility into the trench, in each swing direction, and behind you with the help of smaller cab posts and larger windows.
- Serrated steps and anti-skid punch plate on the service platform help prevent slipping.
- A rearview camera is standard.
Easy Maintenance
- Expect less maintenance cost due to extended and synchronized service intervals.
- Check hydraulic system oil and easily drain fuel system water from ground level.
- Track your excavator's filter life and maintenance intervals via the in-cab monitor.
- Oil and fuel filters are grouped and located on right-hand side of machine for easy maintenance.
- The air intake filter with pre-cleaner has high dust holding capacity.
- Keep your excavator secure with Operator ID. Use your PIN code on the monitor to enable the push button starting feature.
- The hydraulic oil filter provides improved filtration performance, anti-drain valves to keep oil clean when the filter is replaced, and longer life with a 3,000 hour replacement interval – 50 percent longer than previous filter designs.
- S·O·SSM ports are on ground level, simplifying maintenance and allowing for quick, easy extraction of fluid samples for analysis.
Sustainability
- The Cat® C7.1 TTA engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Cat Grade technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy.
- Auto engine speed control reduces unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
- Cat® Payload for excavators provides on-the-go material weighing, which helps reduce fuel burn by improving loading efficiency, jobsite productivity, and eliminating trips to the scale.
- Cat® 2D E-fence keeps the front linkage within a predefined work area to avoid hazards such as traffic - not only helping keep personnel safe but also helps you avoid repairs, downtime, and costly job site fines.
- Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
- Cat VisionLink® displays the CO2 emissions for monitored assets, calculated by fuel type for the runtime fuel burned each day in a selected date range.
- Remote flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
- Remote troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.
*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel.