301.7 CR Mini Hydraulic Excavator
The Cat® 301.7 CR Mini Excavator delivers power and performance in a compact size to help you work in a wide range of applications.
Engine
- Net Power
- 21HP
- Engine Model
- C1.1
- Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC
- 21HP
- Gross Power - SAE J1995:2014
- 21.6HP
- Displacement
- 69in³
- Stroke
- 3.2in
- Bore
- 3in
- Emissions
- Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
- Note (2)
- Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load.
- Note
- Net power is tested per ISO 9249:2007 and 80/1269/EEC.
- Note (1)
- Engine power is tested per ISO 14396:2002.
Weights
- Operating Weight
- 4222lb
- EU: CE Plate Weight***
- 4167lb
- Note (2)
- **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank.
- Note (1)
- *Minimum Weight is based on rubber tracks, operator, expandable undercarriage and full fuel tank.
- Maximum Operating Weight with Canopy**
- 4222lb
- Note (3)
- ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.
- Minimum Operating Weight with Canopy*
- 3946lb
Dimensions - Long Stick
- Dig Depth
- 100in
- Overall Shipping Length*
- 141.3in
- Minimum Ground Clearance Below Undercarriage
- 5.5in
- Boom Height - Shipping Position
- 40.9in
- Boom In Reach
- 63.8in
- Boom Swing - Left
- 65°
- Boom Swing - Right
- 50°
- Maximum Blade Depth
- 10.4in
- Maximum Blade Height
- 10.6in
- Maximum Dig Height
- 137.4in
- Maximum Dump Clearance
- 98.8in
- Maximum Reach
- 162.6in
- Maximum Reach - Ground Level
- 159.8in
- Note
- *Overall Shipping Length depends on blade position during shipment.
- O/A Shipping Height
- 90.6in
- O/A Undercarriage Length
- 62.6in
- Swing Bearing - Height
- 17.4in
- Tail Swing
- 25.6in
- Track Belt/Shoe Width
- 9.1in
- Track Width - Retracted
- 39in
- Vertical Wall
- 74.4in
- Stick Length
- 45.7in
- Track Width - Expanded
- 51.18in
Blade
- Height
- 8.9in
- Note
- *Expanded – 1300 mm (51 in)
- Width*
- 39in
Travel System
- Travel Speed - Low
- 1.8mile/h
- Travel Speed - High
- 2.7mile/h
- Maximum Traction Force - Low Speed
- 4136.5lbf
- Maximum Traction Force - High Speed
- 2675.2lbf
- Ground Pressure - Maximum Weight
- 4.4psi
- Gradeability - Maximum
- 30 degrees
- Ground Pressure - Minimum Weight
- 4psi
Swing System
- Machine Swing Speed
- 9.8r/min
Sound
- Average Exterior Sound Pressure (ISO 6395:2008)
- 93dB(A)
- Note
- European Union Directive “2000/14/EC”
Service Refill Capacities
- Hydraulic Tank
- 4.8gal (US)
- Hydraulic System
- 6.9gal (US)
- Cooling System
- 1gal (US)
- Engine Oil
- 1.2gal (US)
- Fuel Tank
- 5.8gal (US)
Hydraulic System
- Type
- Load Sensing Hydraulics with Variable Displacement Piston Pump
- Pump Flow at 2,400 rpm
- 17.4gal/min
- Operating Pressure - Travel
- 3553.4psi
- Digging Force - Bucket
- 3641.9lbf
- Digging Force - Stick - Long
- 1865.9lbf
- Operating Pressure - Equipment
- 3553.4psi
- Operating Pressure - Swing
- 2132.1psi
- Auxiliary Circuit - Primary - Flow
- 8.7gal/min
- Auxiliary Circuit - Secondary - Pressure
- 3553.4psi
- Digging Force - Stick - Standard
- 2135.7lbf
- Auxiliary Circuit - Primary - Pressure
- 3553.4psi
- Auxiliary Circuit - Secondary - Flow
- 3.7gal/min
Dimensions - Standard Stick
- Minimum Ground Clearance Below Undercarriage
- 5.5in
- O/A Undercarriage Length
- 62.6in
- Maximum Reach - Ground Level
- 153.5in
- Maximum Dump Clearance
- 96.5in
- Tail Swing
- 25.6in
- Swing Bearing - Height
- 17.4in
- Track Belt/Shoe Width
- 9.1in
- Track Width - Expanded
- 51.18in
- Overall Shipping Length*
- 142.5in
- Stick Length
- 37.8in
- O/A Shipping Height
- 90.6in
- Maximum Reach
- 156.3in
- Maximum Dig Height
- 135in
- Maximum Blade Depth
- 10.4in
- Maximum Blade Height
- 10.6in
- Dig Depth
- 92.5in
- Boom Height - Shipping Position
- 42.9in
- Boom In Reach
- 64.2in
- Boom Swing - Left
- 65°
- Boom Swing - Right
- 50°
- Vertical Wall
- 70.9in
- Note
- *Overall Shipping Length depends on blade position during shipment.
- Track Width - Retracted
- 39in
Weight Increase from Minimum Configuration
- Heavy Counterweight
- 148lb
- Long Stick
- 22lb
- Expandable Undercarriage
- Standard
- Steel Tracks
- 110lb
Sustainability
- Recyclability
- 95%
Certification - Canopy
- Roll Over Protective Structure (ROPS)
- ISO 12117-2:2008
- Tip Over Protective Structure (TOPS)
- ISO 12117:1997
- Top Guard
- ISO 10262:1998 (Level I)
ALL DAY COMFORT
- Adjustable wrist rests and a suspension seat option help keep you working comfortably all day long.
EASY TO OPERATE
- Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information.
STICK STEER TRAVEL MODE
- Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!
BIG PERFORMANCE IN A COMPACT DESIGN
- Strong lift and dig performance helps you get the job done faster. The compact radius design and retractable undercarriage lets you access and work in the tightest areas. Dig-to-blade and dozer float features allow for easy clean up.
SAFETY ON THE JOB SITE
- Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt are just a couple of the safety features we've built into the machine.
SIMPLE SERVICE FOR LESS DOWNTIME
- Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up canopy lets you reach additional service areas when needed.
LOWER OPERATING COSTS
- Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.
SUSTAINABILITY
- The Cat® C1.1 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
- Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
- Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
- The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
- Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
- Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
- Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)