D1 Dozer

D1 Dozer

360° Exterior View (HTML5)

The Cat® D1 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing ...
PDF Print Share

Engine

Engine Model
Cat C3.6
Power - Net
80HP
Displacement
220inÂł
Net Power - 2,200 rpm - SAE J1349
80HP
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
80HP
Note (1)
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ?ywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

Weights 

Operating Weight
17855lb

Weights

Operating Weight - LGP
18839lb
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Operating Weight - LGP, 762 mm/30 in
19295lb
Note (2)
For machine with ripper, add 554 kg (1,222 lb).

Transmission

Drive Pumps
1
Maximum Travel Speed - Reverse
6.2mile/h
Relief Valve Settings
7033psi
Maximum Travel Speed - Forward
5.6mile/h
Track Motors
2

Hydraulic Controls

Pump Output
17.2gal/min
Relief Valve Settings
2988psi

Ripper

Type
Parallelogram
Number of Shanks
3
Height
6.5in
Weight
1222lb
Maximum Ground Clearance Under Tip
17.6in
Maximum Digging Depth
13.3in
Overall Width
67.3in
Maximum Reach - Ground Line
30.2in

Dimensions 

Note 
With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
BLADE: Blade Width at Maximum Angle - Standard 
95.2in
BLADE: Digging Depth - Standard 
23.2in
BLADE: Blade Width - Standard 
104.2in
BLADE: Blade Lift Height - Standard 
28.7in
Ground Clearance - Standard 
13in
BLADE: Blade Cutting Edge Angle, Adjustable - Standard 
52° to 58°
BLADE: Maximum Angle (either side) - Standard 
25°
BLADE: Maximum Tilt - Standard 
14.5in
BLADE: Blade Capacity (SAE) - Standard 
1.99ydÂł
Track Gauge - Standard 
58.9in
BLADE: Blade Height - Standard 
35.8in
Overall Length - With Blade - Standard 
168in

Service Refill Capacities

Crankcase - With Filter
2.8gal (US)
Final Drive - Each - LGP
2.6gal (US)
Cooling System
4.2gal (US)
Diesel Exhaust Fluid (DEF) Tank
4.9gal (US)
Transmission - Hydraulic Tank
23.8gal (US)
Fuel Tank
51.5gal (US)

Engine 

Power Train 
Hydrostatic

Cab

FOPS
ISO 3449:2005 Level II
ROPS
ISO 3471:2008

Undercarriage

Length - Track on Ground - LGP, 762 mm (30 in)
89in
Length - Track on Ground - LGP
89in
Track Gauge - LGP
68in
Shoe Width - LGP, 762 mm (30 in)
30in
Track Gauge - LGP, 762 mm (30 in)
73in
Shoe Width - LGP
25in
Track Gauge
59in
Shoe Width - Standard
16in
Ground Pressure - LGP
4.3psi
Ground Pressure - LGP, 762 mm (30 in)
3.7psi
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
43
Number of Rollers - Each Side
6

Undercarriage 

Length of Track on Ground 
89in
Number of Shoes - Each Side - Abrasion Undercarriage 
38
Ground Pressure 
6.45psi

Service Refill Capacities 

Final Drives - Each Side 
2.6gal (US)

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the ?uorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Dimensions

BLADE: Blade Capacity (SAE) - LGP
2.17ydÂł
BLADE: Blade Lift Height - LGP
28.7in
BLADE: Maximum Tilt - LGP
17.2in
BLADE: Blade Width - LGP
124in
Ground Clearance - LGP
13in
BLADE: Blade Width at Maximum Angle - LGP
113.1in
BLADE: Digging Depth - LGP
23in
Track Gauge - LGP
67.9in
Ground Clearance - LGP, 762 mm (30 in)
13in
BLADE: Blade Height - LGP
33.8in
Overall Length - With Blade - LGP, 762 mm (30 in)
167.8in
Track Gauge - LGP, 762 mm (30 in)
73in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
BLADE: Maximum Angle (either side) - LGP
25°
Overall Length - With Blade - LGP
167.8in
Note
*Abrasion Undercarriage
Dozer Height - Standard
108.9in
Dozer Height - LGP, 762 mm (30 in)
108.9in
Width of Dozer (standard shoes, no blade) - LGP
92.9in
Dozer Height - LGP
108.9in
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
94.9in
Length of Basic Dozer (without blade) - LGP
129.6in
Length of Basic Dozer (without blade) - Standard
129.6in
Width of Dozer (standard shoes, no blade) - Standard
74.8in
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)
129.6in

Retrieval Winch

Overall width
27.91in
Winch Length
35.63in
Throat Clearance
5.6in
Drum Width
9.65in
Drum Diameter
8in
Weight
1747lb
Maximum Line Pull - Full Drum
79ft/min
Drum Capacity - Recommended Cable
277ft
Maximum Line Pull - Bare Drum
50ft/min
Drum Capacity - Optional Cable
195ft
Maximum Line Speed - Full Drum
20350lb
Control
Hydraulic
Maximum Line Speed - Bare Drum
32150lb
Rope Diameter - Optional
0.75in
Winch Drive
Hydraulic
Rope Diameter - Recommended
0.63in
Speed
Variable

High Performance Winch

Weight
1345lb
Drum diameter
10in
Winch drive
Hydrostatic
Winch length
27.76in
Maximum line pull – bare drum
40000lb
Maximum line speed – full drum
207ft/min
Drum width
10.8in
Drum capacity – optional
256ft
Rope diameter – recommended
0.63in
Maximum line pull – full drum
25000lb
Rope diameter – optional
0.75in
Speed
Variable
Maximum line speed – bare drum
131ft/min
Throat clearance
6.75in
Drum capacity – recommended cable
371ft
Overall width
29.2in
Control
Hydraulic

Standard Equipment:

Optional Equipment:

    Power Train
    • Air cleaner with external precleaner
    • Installation, winch
    Electrical
    • Four integrated front LED lights, two rear LED
    Undercarriage
    • Abrasion undercarriage (38 section)
    • Track Pairs:
      – Track, 406 mm (16 in)
      – Track, 635 mm (25 in)
      – Track, 762 mm (30 in)
    Hydraulic
    • Four valve for use with ripper
    • Four valve for use with winch
    Cat Technology
    • Cat Grade with Slope Assist
    • Cat Grade with 3D
    • Blade Load Monitor (included with Cat Grade 3D)
    • AutoCarry (included with Cat Grade 3D)
    • Cat Product Link PLE643/PLE743 Cellular
    • Cat Product Link PLE683/PLE783 Cellular/Satellite
    • Full-color 10 in (254 mm) touchscreen grade display
    • Cat Command Console
    • Cat Command Station
    Attachments
    • Drawbar, towing
    • Machine security system
    • Mounting, winch
    • Ripper, parallelogram, includes three
    • shanks and teeth
    • Winch, hydraulic, high performance
    • Winch, hydraulic, retrieval
    Operator Environment
    • Power Pitch
    • Cab, with air conditioning
    • Cab, polycarbonate windows and air conditioning
    • Radio, AM/FM Bluetooth®
    • Seat, air suspension, choice of:
      – Vinyl, heated seat with heated controls
      – Cloth, heated seat with heated controls
      – Cloth, heated and ventilated seat with heated controls
    • Sound suppression
    Other
    • Heater, engine, coolant 120 V/240 V
    • Starting aid, ether