836 Landfill Compactor

836 Landfill Compactor

360° Exterior View

Cat Landfill Compactors are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to operate more efficiently ...
PDF Print Share

Engine

Gross Power - SAE J1995:2014
562hp
Net Power - SAE J1349:2011
496hp
Net Power – ISO 9249:2007
502hp
Engine Power - ISO 14396:2002
553hp
Engine Model
C18
Emissions
U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V and Japan 2014 or Brazil MAR-1, equivalent to China Nonroad Stage III/U.S. EPA Tier 3/ EU Stage IIIA
Rated Speed
1900 rpm
Peak Torque ( 1,400 rpm )
2275lbf·ft
Torque Rise
52%
Bore
5.71in
Stroke
7.2in
Displacement
1104.5in³
High Idle Speed
2120r/min
Low Idle Speed
750r/min
Maximum Altitude - Without Derating
7500ft
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.

Operating Specifications

Operating Weight (Tier 4 Final/Stage V)
124063lb
Operating Weight (Tier 3/Stage IIIA equivalent)
123321lb
Maximum Operating Weight (Tier 4 Final/Stage V)
126364lb
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
125622lb

Transmission

Transmission Type
Planetary - Powershift - ECPC
Direct Drive - Forward 1
4.3mile/h
Direct Drive - Forward 2
7.8mile/h
Direct Drive - Reverse 1
4.6mile/h
Direct Drive - Reverse 2
8.2mile/h

Hydraulic System - Lift

Lift System - Circuit
Flow Sharing Implement; Pilot Operated LS Valve w/EH
Lift System - Pump
Variable displacement piston
Max Flow @ 2000 rpm
79gal/min
Relief Valve Setting - Lift
4206psi
Cylinders, Double Acting: Lift, Bore, Stroke
137.9 mm x 1021 mm (5.5 in x 40.2 in)
Pilot System
Variable displacement piston
Pilot Relief Valve Setting
551psi

Hydraulic System - Steering

Steering System - Circuit
Flow Sharing Implement; Pilot, load sensing
Steering System - Pump
Piston – Variable Displacement
Max Flow @ 2000 rpm
79gal/min
Relief Valve Setting - Steering
3495lb/in²
Total Steering Angle
86
Steering Cycle Times - High Idle
3.9s
Steering Cycle Times - Low Idle
6.4s

Service Refill Capacities

Fuel Tank
209gal (US)
Diesel Exhaust Fluid Tank
9gal (US)
Cooling Systems - Tier 4 Final/EU Stage V
40gal (US)
Cooling System - Tier 3/Stage IIIA Equivalent
37.2gal (US)
Engine Crankcase
16gal (US)
Transmission
21.9gal (US)
Differential - Final Drives - Front
49gal (US)
Differential - Final Drives - Rear
50gal (US)
Hydraulic System - Implement/Steering
46.2gal (US)
Hydraulic Tank Only
27.2gal (US)
Note
- All nonroad Tier 4 Final/Stage V diesel engines are required to use: - Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) for EPA and 10 ppm (mg/kg) for EU sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.4 kg of refrigerant which has a CO2 equivalent of 2.002 metric tonnes.

Axles

Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±6°

Braking System

Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Spring Applied, Hydraulic Released

Sound Performance - Tier 4 Final/EU Stage V

Operator Sound Level (ISO 6396:2008) - Standard
72dB(A)
Machine Sound Level (ISO 6395:2008) - Standard
111dB(A)
Operator Sound Level (ISO 6396:2008) - Suppression
72dB(A)
Machine Sound Level (ISO 6395:2008) - Suppression
109dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.

Sound Performance - Tier 3 / Stage IIIA

Operator Sound Level (ISO 6396:2008) - Standard
72dB(A)
Machine Sound Level (ISO 6395:2008) - Standard
112dB(A)
Operator Sound Level (ISO 6396:2008) - Suppression
72dB(A)
Machine Sound Level (ISO 6395:2008) - Suppression
110dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.

Dimensions (Approximate)

Height to Top of Beacon
15.2ft
Height to Top of Air Conditioning Condenser
15.2ft
Height - Cab Roof
14.1ft
Height - Top of Exhaust Pipe
15.1ft
Height - Top of Hood
11.3ft
Ground Clearance to Hitch
2.1ft
Ground Clearance to Transmission Guard
2.1ft
Ground Clearance to Bottom of Bumper
3.2ft
Centerline of Rear Axle to Rear Compactor Guard
11.3ft
Hitch to Centerline of Front Axle
7.5ft
Wheel Base
14.9ft
Width over Front Striker Bars
12.9ft
Width over Rear Striker Bars
12.9ft
Width over Platform
10.5ft
Width over Drums
14ft
Overall Machine Length with Semi U-Blade
35.8ft

Straight Blade

Capacity
25.9yd³
Overall Width
17ft
Height
7.4ft
Height of Cutting Edge
3.7ft
Digging Depth
1.2ft
Ground Clearance
5.7ft
Turning Radius – Outside Corner of Blade
28.7ft
Turning Radius - Inside of Wheels
11.9ft
Weight
6894lb
Total Operating Weight
123000lb

Semi U-Blade

Capacity
29.3yd³
Overall Width
17.4ft
Height
7.5ft
Height of Cutting Edge
4.1ft
Digging Depth
1.2ft
Ground Clearance
5.7ft
Turning Radius – Outside Corner of Blade
28.9ft
Turning Radius – Inside of Wheels
11.9ft
Weight
7963lb
Total Operating Weight
124063lb

U-Blade

Capacity
33.6yd³
Overall Width
17.4ft
Height
7.2ft
Height of Cutting Edge
4.1ft
Digging Depth
3.1ft
Ground Clearance
3.9ft
Turning Radius – Outside Corner of Blade
28.8ft
Turning Radius – Inside of Wheels
11.9ft
Weight
7696lb
Total Operating Weight
123785lb

Wheels

Combination Tips (Weight Group)
28250lb
Plus Tips - Weight (Group)
29784lb
Paddle Tips - Weight (Group)
272227lb
Chopper Tips (Weight Group)
28404lb
Diamond Tips Weight (Group)
32659lb
Outside Diameter
83.8in
Outside Diameter - Diamond
84.3in
Drum Diameter
69.7in
Drum Width
55.1in
Feet Per Row
8
Feet Per Wheel
40
Replaceable
Weld on
Width Over Drums
4280mm
Tip Height
179mm
Tip Height - Diamond
7.25in

OPERATOR COMFORT AND CONTROL

        

  • Flip-up armrest for easy ingress/egress.
  •     

  • Keep your operators informed about machine conditions and operation with Vital Information Management System (VIMS™) 3G machine monitoring system.
  •     

  • Enhanced visibility with standard rearview camera.
  •     

  • Preferred temperature settings maintained with automatic climate control.
  •     

  • Cat Premium Plus seat with standard features including leather finish, forced air heating and cooling, two-way thigh adjustment, power lumbar and back bolster adjustment, and dynamic end dampening to help provide total comfort throughout the workday.
  •     

  • Increased forward visibility with lowered glass for better visibility to the blade and wheels.

BECAUSE UPTIME COUNTS

        

  • Easy access and in a controlled environment; electronics bay is located inside the cab.
  •     

  • Focused on safety with ground level or platform access to most major components.
  •     

  • Ground level: emergency shutdown, battery disconnect, and jump start.
  •     

  • Quick visual inspection and minimize fluid contamination with sight gauges for coolant, transmission, and hydraulic oil.
  •     

  • Electronic air inlet restriction indicator.
  •     

  • Designed for ease of service and inspection– Hydraulic oil cooler, fuel cooler, and roof-mounted condenser– Centralized grease points.
  •     

  • Operators and technicians can resolve any problems before failure using VIMS.
  •     

  • Underhood lighting for improved visibility of service points.
  •     

  • Improved guarding around the axles mitigates risk of damaged components.
  •     

  • Improved radiator air inlet door sealing to help reduce radiator cleanout.
  •     

  • Remaining useful life of the engine air filter helps allow for better planning of maintenance and repair activities.

POWERFUL EFFICIENCY

        

  • Improved performance, long life, low emissions.
  •     

  • High productivity and fuel efficient.
  •     

  • Two engine options available that meet U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards or Brazil MAR-1 and China Nonroad Stage III emission standards, U.S. EPA Tier 3 and EU Stage IIIA equivalent.
  •     

  • For the Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 option, the Cat Clean Emissions Module contains a diesel oxidation catalyst, diesel particulate filter, and Cat Regeneration System, utilizing selective catalytic reduction (SCR) technology.
  •     

  • Regeneration is completely automatic and does not interrupt the machine’s work cycle.
  •     

  • Experience maximum responsiveness and control with Steering and Transmission Integrated Control System (STIC™).
  •     

  • Conserve more fuel with the automatic engine and electrical system shutdown.
  •     

  • Achieve greater momentum on grades and fuel savings by carrying that momentum through the shift points advanced productivity electronic control system (APECS) transmission controls.
  •     

  • Operators experience less fatigue with throttle lock to maintain engine speed.
  •     

  • Equipped with Cat torque converter with lock-up clutch which eliminates torque converter (TC) losses while lowering system heat and transfers more power to the ground.
  •     

  • Improved direction shift speed with new Cat locker differentials.
  •     

  • Diesel exhaust fluid (DEF) injector phase change tank to reduce engine idle time at shutdown.
  •     

  • Increase machine tarp lift capability to eliminate need for track type tractor to carry tarp rolling equipment for end of day landfill cover.

PRODUCTIVITY WITH TECHNOLOGY

        

  • Compact technology combines advanced compaction measurement, in-cab guidance, and reporting capabilities to help you consistently meet compaction targets fast, uniformly, and in fewer passes – saving on fuel and the cost of unnecessary rework.
  •     

  • Link technology (standard) provides access to machine location, hours, fuel consumption, idle time, events, and diagnostic codes through the online VisionLink® interface.
  •     

  • Improved productivity with standard Cat Compact with Pass Mapping and 10" display.
  •     

  • Slope indicate feature helps improve construction of slopes and identifies when risk for fluid cavitation occurs.
  •     

  • Improved productivity with optional Cat Compact with Elevation Mapping.

LONG TERM VALUE AND DURABILITY

        

  • Larger diameter axle shafts, the Cat locker differentials, improved duo cone labyrinth, thicker wheel at the spindle for increased strength.
  •     

  • Improved final drive gear set to help reduce stress and enhance pitting life.
  •     

  • Fan motor guard to help prevent bag wrapping.
  •     

  • 5" higher efficiency fuel filter for cleaner fuel to the engine.

WHEEL TIPS BUILT TO PERFORM

        

  • Designed specifically to complement Cat machines.
  •     

  • Improves machine performance through longer wear life and maintaining traction.
  •     

  • Five wheel and tip configurations are available to meet your particular application:
        1) Paddle Tip – High performance and less fuel burn with more traction and less weight.
        2) Plus Tip – Traditional design for increased side slope stability.
        3) Combination Tip – Both paddle and plus tips help provide the best compromise of performance and fuel economy with side slope stability.
        4) Diamond Tip – Longest life tip on the market with reputation of reliability that is world class in the waste tip industry.
        5) Chopper Tip – These types of tips are recommended for wet/soft waste where chopping and/or traction is a large concern and abrasive wear life is not a major concern.

Standard Equipment:

Optional Equipment:

    Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
    Various Blades:
    • Straight blade
    • U-blade
    • Semi U-blade
    Various Tip And Wheel Arrangements:
    • Paddle
    • Plus
    • Diamond