826 Landfill Compactor
Cat Landfill Compactors are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to operate more efficiently ...
Engine
- Gross Power - SAE J1995:2014
- 435hp
- Net Power - SAE J1349:2011
- 405hp
- Net Power – ISO 9249:2007
- 405hp
- Engine Power - ISO 14396:2002
- 426hp
- Engine Model
- C15 Cat®
- Emissions
- U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
- Rated Speed
- 1800
- Torque Rise
- 33%
- Bore
- 5.4in
- Stroke
- 6.7in
- Displacement
- 927.6in³
- High Idle Speed
- 2300r/min
- Low Idle Speed
- 800r/min
- Maximum Altitude – Without Derating (Tier 4 Final/Stage V)
- 9298ft
- Maximum Altitude - Without Derating (Tier 3/Stage IIIA)
- 9098ft
- Note
- Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Operating Specifications
- Operating Weight (Tier 4 Final/Stage V)
- 90207lb
- Operating Weight (Tier 3/Stage IIIA equivalent)
- 89186lb
- Maximum Operating Weight (Tier 4 Final/Stage V)
- 92568lb
- Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
- 91549lb
Transmission
- Transmission Type
- Planetary - Powershift - ECPC
- Direct Drive - Forward 1
- 4.2mile/h
- Direct Drive - Forward 2
- 7.5mile/h
- Direct Drive - Reverse 1
- 4.3mile/h
- Direct Drive - Reverse 2
- 8.6mile/h
Hydraulic System
- Pump Flow at 1800 rpm
- 30.9gal/min
- Main Relief Pressure
- 3771psi
- Maximum Supply Pressure
- 3495psi
- Lift System
- Double Acting Cylinder
- Bore
- 4.7in
- Stroke
- 42.1in
Service Refill Capacities
- Cooling System
- 30.6gal (US)
- Engine Crankcase
- 9gal (US)
- Transmission
- 17.4gal (US)
- Fuel Tank
- 206.6gal (US)
- Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V)
- 8.5gal (US)
- Differential - Final Drives - Front
- 26.4gal (US)
- Differential - Final Drives - Rear
- 29.1gal (US)
- Hydraulic Tank Only
- 35.4gal (US)
- Note
- All nonroad Tier 4 Final and Stage V diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and w
Axles
- Front
- Planetary - Fixed
- Rear
- Planetary - Oscillating
- Oscillation Angle
- ±5°
Braking System
- Service Brakes
- Multi Disc Wet (Enclosed) 2 WHL
- Parking Brake
- Drum and Shoe, Spring Applied, Hydraulic Released
Sound Performance - Tier 4 Final/EU Stage V
- Operator Sound Level (ISO 6396:2008) - Standard
- 73dB(A)
- Machine Sound Level (ISO 6395:2008) - Standard
- 113dB(A)
- Operator Sound Level (ISO 6396:2008) - Suppression
- 72dB(A)
- Machine Sound Level (ISO 6395:2008) - Suppression
- 110dB(A)
- Note (1)
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
- Note (2)
- The machine sound power level was measured according to the test ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
- Note (3)
- Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
- Operator Sound Level (ISO 6396:2008) - Standard
- 73dB(A)
- Machine Sound Level (ISO 6395:2008) - Standard
- 113dB(A)
- Operator Sound Level (ISO 6396:2008) - Suppression
- 72dB(A)
- Machine Sound Level (ISO 6395:2008) - Suppression
- 110dB(A)
- Note (1)
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
- Note (2)
- The machine sound power level was measured according to the test ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
- Note (3)
- Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Hydraulic System - Steering
- Steering System - Circuit
- Pilot operated, load sensing
- Bore
- 4.5in
- Stroke
- 22.7in
- Steering System - Pump
- Piston - Variable Displacement
- Maximum System Flow
- 170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
- Steering Pressure Limited
- 3481psi
- Vehicle Articulation Angle
- 86°
Dimensions (Approximate)
- Height to Top of Air Conditioning Condenser
- 14.99ft
- Height - Cab Roof
- 13.75ft
- Height - Top of Beacon
- 15.63ft
- Height - Top of Exhaust Pipe
- 14.56ft
- Height - Top of Hood
- 10.87ft
- Ground Clearance - Bumper
- 3.15ft
- Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard
- 9.38ft
- Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard
- 10.16ft
- Hitch to Centerline of Front Axle
- 6.07ft
- Wheel Base
- 12.14ft
- Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard
- 28.59ft
- Ground Clearance
- 2.11ft
- Width - Over Wheels
- 12.47ft
- Turning Radius - Inside of Wheels
- 9.18ft
Straight Blade
- Width – Moldboard Length
- 14.16ft
- Width - Over End Bits
- 14.75ft
- Height with Cutting Edge and Screen
- 6.23ft
- Maximum Depth of Cut
- 1.5ft
- Maximum Lift above Ground
- 4.19ft
- Capacity, Rated
- 16.1yd³
- Overall Machine Length (includes rear radiator guard, measured to cutting edge)
- 28.59ft
Semi U-Blade
- Width – Moldboard Length
- 14.66ft
- Width - Over End Bits
- 14.83ft
- Height with Cutting Edge and Screen
- 6.63ft
- Maximum Depth of Cut
- 2.03ft
- Maximum Lift above Ground
- 3.825ft
- Capacity, Rated
- 20.9yd³
- Overall Machine Length (includes rear radiator guard, measured to cutting edge)
- 29.54ft
U-Blade
- Width – Moldboard Length
- 14.25ft
- Width - Over End Bits
- 14.41ft
- Height with Cutting Edge and Screen
- 6.62ft
- Maximum Depth of Cut
- 2.03mm
- Maximum Lift above Ground
- 3.79ft
- Capacity, Rated
- 22.9yd³
- Overall Machine Length (includes rear radiator guard, measured to cutting edge)
- 30.7ft
Wheels
- Combination Tips (Weight Group)
- 21125lb
- Plus Tips - Weight (Group)
- 22002lb
- Paddle Tips - Weight (Group)
- 20540lb
- Diamond Tips Weight (Group)
- 23997lb
- Outside Diameter
- 77.6in
- Outside Diameter - Diamond
- 78.1in
- Drum Diameter
- 63.4in
- Drum Width
- 47.2in
- Feet Per Row
- 6
- Feet Per Wheel
- 30
- Replaceable
- Weld On
- Width Over Drums
- 3800mm
- Tip Height
- 179mm
- Tip Height - Diamond
- 7.25in
OPERATOR COMFORT AND CONTROL
- Flip-up armrest for easy ingress/egress.
- Keep your operators informed about machine conditions and operation with Vital Information Management System (VIMS™) 3G machine monitoring system.
- Enhanced visibility with standard rearview camera.
- Preferred temperature settings maintained with automatic climate control.
- Cat Premium Plus seat with standard features, including leather finish, forced air heating and cooling, two-way thigh adjustment, power lumbar and back bolster adjustment, and dynamic end dampening to provide total comfort throughout the workday.
- Low spectator sound levels and optional low sound packages.
TOP-TIER SERVICE AND SUPPORT
- Easy access in a controlled environment; electronics bay is located inside the cab.
- Focused on safety with ground level or platform access to most major components.
- Ground level: engine shutdown switch, lockable battery disconnect, and auxiliary start.
- Quick visual inspection and minimized fluid contamination with sight gauges for coolant, transmission, and hydraulic oil.
- Electronic air inlet restriction indicator.
- Designed for ease of service and inspection.
– Hydraulic oil cooler, fuel cooler, and roof-mounted condenser
– Centralized grease points - Operators and technicians can resolve any problems before failure using VIMS.
- Guarding around the axles mitigates risk of damaged components.
EFFICIENCY AND PRODUCTIVITY
- Improved performance, long life, low emissions.
- High productivity and fuel efficient.
- Two engine options available that meet U.S. EPA Tier 4 Final and EU Stage V emission standards or emitting equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
- For the Tier 4 Final, EU Stage V option, the Cat Clean Emissions Module contains a diesel oxidation catalyst, diesel particulate filter, and Cat Regeneration System, utilizing selective catalytic reduction (SCR) technology.
- Regeneration is completely automatic and does not interrupt the machine’s work cycle.
- Experience maximum responsiveness and control with Steering and Transmission Integrated Control (STIC™) system.
- Conserve more fuel with the automatic engine and electrical system shutdown.
- Achieve greater momentum on grades and fuel savings by carrying that momentum through the shift points advanced productivity electronic control system (APECS) transmission controls.
- Operators experience less fatigue with throttle lock to maintain engine speed.
- Equipped with Cat torque converter with lock-up clutch which eliminates torque converter (TC) losses while lowering system heat and transfers more power to the ground.
- Torque converter with lock-up clutch eliminates torque converter losses while lowering system heat. Improves travel speeds and increases fuel efficiency.
- Lock-up torque converter transfers more power to the ground and optimizes fuel efficiency in all applications.
PRODUCTIVITY WITH TECHNOLOGY
- Compact technology combines advanced compaction measurement, in-cab guidance, and reporting capabilities to help you consistently meet compaction targets fast, uniformly, and in fewer passes – saving on fuel and the cost of unnecessary rework.
- Link technology (standard) provides access to machine location, hours, fuel consumption, idle time, events, and diagnostic codes through the online VisionLink® interface.
- Improved productivity with optional Cat Compact with Elevation Mapping.
LONG TERM VALUE AND DURABILITY
Working in the toughest application, the purpose-built 826 Landfill Compactor has specialized waste guarding to protect key components and systems from damage, debris, chemicals, premature wear, or wrapping of the material around components. This additional guarding includes:
- Engine and Powertrain Guards – Hydraulically actuated guards help prevent trash buildup and shield components.
- Front Frame Guards – Front frame guards prevent trash buildup inside the frame. This guard further protects components and hydraulic lines.
- Axle Wrapping and Seal Guarding – The guarding prevents material from wrapping and binding around the axles, as well as assists in ease of cleaning.
- Major System Guarding and Sight Gauges – Transmission oil tube is guarded to resist damage from debris. The sight gauge for the transmission is visible from ground level. The fuel tank is positioned away from the debris in the front frame and is easily accessed.
- Air Inlet Screen – The vertically corrugated, fine-mesh air inlet screen helps reduce trash from entering the radiator area and allows for debris to fall off.
- Striker Bars and Optional Cleaner Fingers – Striker bars are located in front of and behind the rear wheels and behind the front wheels. Striker bars help to keep wheels free of debris to assist the wheel step tips in maintaining good compaction. In cohesive material or severe packing conditions, optional cleaner fingers are available to further assist in keeping the wheel step tips clean.
- Extended Roof – An oversized roof extends past the cab doors and windows to minimize debris buildup.
- Under Hood Ventilation System – Creates a neutral pressure environment to prevent trash ingestion from hood openings while providing fresh air to the alternator, electronics, and turbo.
WHEEL TIPS BUILT TO PERFORM
- Designed specifically to complement Cat machines.
- Improves machine performance through longer wear life and maintaining traction.
- Four wheel and tip configurations are available to meet your particular application:
- Paddle Tip – High performance and less fuel burn with more traction and less weight.
- Plus Tip – Traditional design for increased side slope stability.
- Combination Tip – Both paddle and plus tips provide the best compromise of performance and fuel economy with side slope stability.
- Diamond Tip – Longest life tip on the market with reputation of reliability that is world class in the waste tip industry.