MP345 Shear Jaw

MP345 Shear Jaw

Cat® Multi-Processors accept multiple interchangeable jaws for a wide range of demolition tasks. Faster cycle times get your jobs done quicker. Greater power means taking on bigger jobs. ...
PDF Print SHARE

Performance

Cycle Time - Open
1.9s
Cycle Time - Open
0.019
Cycle Time - Close
1.4s
Cycle Time - Close
0.014
Cutting Force - Blade Throat
1945Sh Ton
Cutting Force - Primary Cutter
9.51
Cutting Force - Blade Center
3637Sh Ton
Cutting Force - Cutter Tip
4.09
Cutting Force - Blade Tip
8463Sh Ton
Cutting Force - Piercing Tip
2.19

Recommended Carrier Weight

Excavator Minimum
45 tons
Excavator Maximum
65 tons

Hydraulic Requirements

Jaw Circuit - Max. Oil Pressure
35000psi
Jaw Circuit - Max. Oil Pressure
360
Jaw Circuit - Max. Oil Flow
360gal/min
Jaw Circuit - Max. Oil Flow
160
Rotation Circuit - Max. Oil Pressure
16000psi
Rotation Circuit - Max. Oil Pressure
0.5
Rotation Circuit - Max. Oil Flow
50gal/min

Dimensions - Jaw

Jaw Depth
744in
Jaw Depth
29
Cutter Length
579in
Cutter Length
23
Jaw Opening - Maximum
500in
Jaw Opening - Maximum
20
Jaw Width - Fixed
434in
Jaw Width - Fixed
17
Jaw Width - Moveable
146in
Jaw Width - Moveable
6

Dimensions - Housing + Jaw

Width
1005in
Length
90
Length
2296in
Height
73
Height
1865in
Width
40

Weight

Weight - Housing, Jaw and Bracket
4320lb
Weight - Housing, Jaw and Bracket
95.24
Weight - Jaw Only
2258lb
Weight - Jaw Only
49.78

Dimensions

Cutting Circuit - Hyd. Maximum Op. Pressure
0
Force Primary Blade Center
0
Force at Cutting Tip
0
Force at Throat
0
Jaw Opening
0
Rotation Circuit, hyd. Maximum Oil Flow
0
Rotation Circuit, hyd. Maximum Op. Pressure
0
Weight - Jaw
0
Weight - With Housing
0

Cycle Times are 50 Percent Faster

  • New speed booster technology dynamically shifts hydraulic force from speed to boost mode, automatically as you operate.
  • You’ll spend less time waiting for the jaw to open or close to contact, as the speed valve automatically adjusts to fast flow when there’s no load.
  • Maximum crushing/cutting force is applied as soon as the jaw contacts material.

Up to 19 Percent More Force

  • Process more per hour, ship more per shift, make more every day. Speed booster magnifies hydraulic force when the jaw contacts material, quickly making the cut.
  • Mount more power even on smaller excavators. Compact design keeps the center of gravity as close as possible to the machine.
  • Get maximum performance and total support with a complete Cat demolition solution. Programs for the MP are built into the Next Gen Cat operator display. Single point of support your entire system by your local Cat dealer.

Change Jaws in 15 Minutes

  • Innovative jaw locking enables a single operator to easily change jaws in 15 minutes or less. Requires only standard hand tools.
  • Simple and safe jaw changes are part of the design. Every jaw sits stable, even on the roughest work site, on the included jaw stand.
  • MP332 accepts these jaw types:
    • Concrete Cutter – outer jaw cracks concrete; inner shear jaw cuts steel
    • Demolition – opens wide to crack the largest concrete structures
    • Pulverizer – crushes concrete, separating the rebar
    • Shear – cuts structural steel, pipe, and cable

Durable and Maintainable

  • Protect your investment and maintain performance, quickly and economically. Jaws are protected with easily changed, individually replaceable wear parts.
  • Get more production time per cutter before replacement. Most cutting blades can be flipped in two ways, to use four different cutting edges.
  • Even when deep into debris, the cylinder rod is armored to prevent damage and the main cylinder body is protected inside the housing.

Standard Equipment: