Cat Skid Steer Snow Wing
THE RUNDOWN
Curved Moldboard
Curved moldboard design rolls and folds the snow while windrowing, minimizing snow clinging to its surface and spilling over the top.
Adjustable Rear Skid Shoes
Adjustable skid shoes reduce the chances of gouging plowed surface and allow for improved operator control and maintains a constant cutting edge depth.
Lateral Float
Lateral float allows the plow the ability to pivot up to five degrees about the plow frame allowing the blade to follow surface contours and plow more efficiently.
Adjustable Trip Edges
Adjustable trip edges are incorporated into the base of each wing. Sectioned off moldboard springs back upon contact with unseen obstacles minimizing risk of damage to the wing and machine.
Bolt-On Serrated Step
Bolt-On serrated step provides safe and ergonomic access to machine cab that is replaceable if damaged.
Rotary Actuators
Allows 180 degrees of rotation for each wing for maximum versatility. Both wings are independently controlled. The use of actuators rather than cylinders also keeps the components better protected from damage.
Wing Stops
Stops on the attachment keep the wings from contacting the tires or tracks of the machine regardless of plow angle to prevent damage.
Up to 35 Degree Angle
Plow can angle left or right 35 degrees allowing the operator more control over direction of the snow.
Reversible Cutting Edge
Cutting edge is easy to replace, and can be reversed when dull to get another life.
Floating End Plate Edge
Follow surface contour for more consistent snow clearing.
Adjustable Crossover Relief Valve
Crossover relief allows plow to angle if it impacts a solid object. This helps prevent damage to the attachment in extreme conditions.
General
| Working Width (Wings Closed) | 108.3in |
| Overall Width (Wings Closed) | 114.2in |
| Overall Width (Wings Open) | 174.2in |
| Working Width (Wings Open) | 174.2in |
| Weight | 1821lb |
| Length | 67.1in |
| Overall Height | 36in |
| Hydraulic Angling - Left/Right of Center | ±35 Degrees |
| Float | ±5 Degrees |
| Wing Rotation | 180 degrees |
| Optimal Hydraulic Flow | 76-87 L/min (20-23 gpm) |
| Optimal Hydraulic Pressure | 200-230 bar (2800-3300 psi) |
| Interface Type | Skid Steer Coupler |
| Trip Edge Type | Steel |
| Trip Edge Height | 5.1in |
| Trip Edge Quantity | 1 |
| Required Hydraulics | Standard Flow with Electrical |