Cat D2/D4K Dozer LGP 84-92 HP
THE RUNDOWN
Grade with ease and accuracy
The D4K2 Dozer offers numerous grade control features to enable operators to grade with increased accuracy. Features such as Cat® GRADE with 3D, Cat GRADE with Slope Assist, AccuGrade and Slope Indicate allows for a smooth finish grade for both new and experienced operators every time.
Choices for any Application
- The family of Small Dozers offers a choice of both track frames and undercarriages.
- Track frames are available in two configurations:
- XL undercarriage - where flotation and side stability are not extreme
- LGP undercarriage - for soft underfoot conditions where additional flotation is required
- Undercarriages are available in two configurations:
- Sealed and Lubricated Track (SALT) Undercarriage
- – Track is not bushing limited
- – May require pin and bushing turn
- SystemOne™ Undercarriage
- – Track is bushing limited
- – Bushing rotates continuously
- – Does not require bushing turn
- – Designed to maximize the life of all undercarriage components
All Day Comfort
- The spacious, comfortable cab helps keep you relaxed and productive throughout the day.
- Quiet environment
- Wide door openings for easy entry/exit
- Dash mounted air vents for improved air circulation
- Air suspension seat for a more comfortable ride
- Air conditioning for greater comfort in all climates
- New ventilated seat (optional)
- Heated seat and heated control handles (optional)
Easy Serviceability Access
- Long service intervals and easy maintenance keep the machine up and running to lower your owning and operating costs.
- Large, hinged door on the left side of the engine compartment for easy access to all regular engine maintenance points
- Grouped pressure taps for quick testing and troubleshooting of the hydraulic system
- Easy ground level access to hydraulic filters located in the left rear service compartment
Engine
| Engine Model | Cat C4.4 |
| Power - Net | 92hp |
| Displacement | 269in³ |
| Bore | 4.13in |
| Stroke | 5in |
| Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 | 92hp |
| Net Power - 2,200 rpm - SAE J1349 | 92hp |
| Note | Engine meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards. |
Transmission
| Drive Pumps | 1 |
| Relief Valve Settings | 7033psi |
| Maximum Travel Speed - Reverse | 6.2mile/h |
| Maximum Travel Speed - Forward | 5.6mile/h |
| Track Motors | 2 |
Weights
| Operating Weight - XL | 18007lb |
| Operating Weight - LGP | 18686lb |
| Note (1) | Specifications shown are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank. |
| Note (2) | Enclosed cab adds 225 kg (495 lb). |
Service Refill Capacities
| Transmission - Hydraulic Tank | 15.7gal (US) |
| Final Drive - Each - LGP | 2.6gal (US) |
| Fuel Tank | 51.5gal (US) |
| Crankcase - With Filter | 2.91gal (US) |
| Final Drive - Each - XL | 2.6gal (US) |
| Cooling System | 5.92gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | 4.9gal (US) |
Hydraulic Controls
| Pump Output | 17.7gal/min |
| Relief Valve Settings | 2988psi |
Undercarriage
| Ground Pressure - XL | 5.6psi |
| Track Gauge - LGP | 68in |
| Shoe Width - XL | 18in |
| Ground Contact Area - XL | 3206in² |
| Ground Pressure - LGP | 4.2psi |
| Length - Track on Ground - XL | 89in |
| Shoe Width - LGP | 25in |
| Ground Contact Area - LGP | 4425in² |
| Track Gauge - XL | 61in |
| Length - Track on Ground - LGP | 89in |
| Number of Rollers - Each Side | 7 |
| Number of Shoes - Each Side - SystemOne Undercarriage | 38 |
| Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage | 43 |
Ripper
| Type | Parallelogram |
| Number of Shanks | 3 |
| Height | 6.5in |
| Weight | 1222lb |
| Maximum Reach - Ground Line | 23.5in |
| Maximum Digging Depth | 13.3in |
| Maximum Ground Clearance Under Tip | 17.6in |
| Overall Width | 67.3in |
Winch
| Weight | 1345lb |
| Winch Drive | Hydrostatic |
| Control | Hydraulic |
| Speed | Variable |
| Drum Diameter | 10in |
| Throat Clearance | 6.75in |
| Overall Width | 29.2in |
| Maximum Line Pull - Full Drum | 25000lb |
| Maximum Line Speed - Bare Drum | 131ft/min |
| Winch Length | 27.76in |
| Drum Width | 10.8in |
| Drum Capacity - Recommended Cable | 371ft |
| Rope Diameter - Optional | 0.75in |
| Maximum Line Pull - Bare Drum | 40000lb |
| Drum Capacity - Optional Cable | 256ft |
| Maximum Line Speed - Full Drum | 207ft/min |
| Rope Diameter - Recommended | 0.63in |
Cab
| Sound Levels - ISO 6396:2008 | 79dB(A) |
| Sound Levels - SAE J1166 FEB2008 | 79dB(A) |
| ROPS | ISO 6396:2008 |
| FOPS | ISO 3449:2005 Level II |
Dimensions
| Track Gauge - LGP | 67.9in |
| BLADE: Blade Width at Maximum Angle - XL | 100.1in |
| Tractor Height - LGP | 108.8in |
| BLADE: Maximum Tilt - LGP | 17.2in |
| BLADE: Digging Depth - XL | 22.5in |
| BLADE: Blade Width at Maximum Angle - LGP | 113.1in |
| BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate | 52° to 58° |
| BLADE: Digging Depth - Intermediate | 23.2in |
| BLADE: Blade Lift Height - Intermediate | 29.3in |
| BLADE: Maximum Tilt - Intermediate | 17.6in |
| BLADE: Blade Lift Height - LGP | 27.9in |
| Track Gauge - XL | 61in |
| Width - Tractor - Standard Shoes - No Blade - LGP | 92.9in |
| Width - Tractor - Standard Shoes - No Blade - XL | 79.1in |
| Overall Length - With Blade - LGP | 168.3in |
| BLADE: Blade Capacity (SAE) - LGP | 2.42yd³ |
| BLADE: Blade Lift Height - XL | 29.3in |
| Length - Basic Tractor - Without Blade - LGP | 128.9in |
| Length - Basic Tractor - Without Blade - XL | 128.9in |
| BLADE: Blade Capacity (SAE) - Intermediate | 1.96yd³ |
| BLADE: Blade Width - XL | 109.5in |
| BLADE: Blade Height - LGP | 35.8in |
| Tractor Height - XL | 108.8in |
| BLADE: Blade Width at Maximum Angle - Intermediate | 105.1in |
| BLADE: Maximum Tilt - XL | 15.2in |
| Ground Clearance - XL | 13in |
| BLADE: Blade Height - Intermediate | 33.9in |
| BLADE: Blade Width - LGP | 124in |
| BLADE: Maximum Angle (either side) - Intermediate | 25° |
| BLADE: Blade Width - Intermediate | 115in |
| BLADE: Maximum Angle (either side) - LGP | 25° |
| BLADE: Digging Depth - LGP | 23.2in |
| BLADE: Blade Cutting Edge Angle, Adjustable - LGP | 52° to 58° |
| Ground Clearance - LGP | 13in |
| BLADE: Maximum Angle (either side) - XL | 25° |
| BLADE: Blade Height - XL | 39.8in |
| BLADE: Blade Cutting Edge Angle, Adjustable - XL | 52° to 58° |
| BLADE: Blade Capacity (SAE) - XL | 2.59yd³ |
| Overall Length - With Blade - XL | 168.3in |