Cat D3/D5K Dozer LGP 94-104 HP
THE RUNDOWN
Operator Station
Hydrostatic Transmission Control
Engine
Undercarriage
AccuGrade™ Systems
Blade and Attachments
Hydrostatic Winch
Serviceability
Customer Support
Engine
| Engine Model | CAT C4.4 ACERT™ |
| Power - Net | 96hp |
| Power - Gross | 100hp |
| Displacement | 269in³ |
| Caterpillar | 96hp |
| ISO 9249 | 96hp |
| EEC 80/1269 | 96hp |
| SAE J1349 | 96hp |
| Bore | 4.13in |
| Stroke | 5in |
Transmission
| Drive Pumps | 2 |
| Track Motors | 2 |
| Relief Valve Settings | 6911psi |
| Maximum Travel Speed - Forward | 5.6mile/h |
| Maximum Travel Speed - Reverse | 6.2mile/h |
Weights
| Operating Weight - XL | 20741lb |
| Operating Weight - LGP | 21347lb |
Service Refill Capacities
| Fuel Tank | 51.5gal (US) |
| Crankcase - With Filter | 2.91gal (US) |
| Final Drive - Each - XL | 2.6gal (US) |
| Final Drive - Each - LGP | 2.6gal (US) |
| Cooling System | 5.92gal (US) |
| Transmission - Hydraulic Tank | 15.7gal (US) |
Hydraulic Controls
| Pump Output | 19.4gal/min |
| Relief Valve Setting | 2988psi |
Undercarriage
| Shoe Width - XL | 20in |
| Shoe Width - LGP | 26in |
| Length - Track on Ground - XL | 91in |
| Length - Track on Ground - LGP | 91in |
| Track Gauge - XL | 63in |
| Track Gauge - LGP | 69in |
| Ground Contact Area - XL | 3652in² |
| Ground Contact Area - LGP | 4726in² |
| Ground Pressure - XL | 5.67psi |
| Ground Pressure - LGP | 4.52psi |
| Shoe width - LGP Option 2 | 30in |
| Ground Contact Area - LGP with 770 mm (30 in) Shoes | 5514in² |
| Ground Pressure - LGP with 770 mm (30 in) Shoes | 3.93psi |
| Track Gauge - LGP, 770 mm (30 in) | 73.2in |
Ripper
| Type | Parallelogram |
| Number of Shanks | 3 |
| Maximum Digging Depth | 13.3in |
| Maximum Reach - Ground Line | 21.9in |
| Maximum Ground Clearance Under Tip | 17.6in |
| Overall Width | 67.3in |
| Height | 6.5in |
| Weight | 1222lb |
Winch
| Weight | 1345lb |
| Winch Drive | Hydrostatic |
| Control | Hydraulic |
| Speed | Variable |
| Winch Length | 27.76in |
| Overall Width | 29.2in |
| Drum Diameter | 10in |
| Drum Width | 10.8in |
| Throat Clearance | 6.75in |
| Rope Diameter - Recommended | 0.63in |
| Rope Diameter - Optional | 0.75in |
| Drum Capacity - Recommended Cable | 371ft |
| Drum Capacity - Optional Cable | 256ft |
| Maximum Line Pull - Bare Drum | 40000lb |
| Maximum Line Pull - Full Drum | 25000lb |
| Maximum Line Speed - Bare Drum | 131ft/min |
| Maximum Line Speed - Full Drum | 207ft/min |
Standards
| ROPS | SAE J397-OCT95, SAE J1040-MAY94, ISO 3471-94, ISO 3164-95 |
| FOPS | SAE J231-JAN81, ISO 3449-92 |
Blade
| Blade Width - Intermediate | 115in |
| Blade Width - XL | 109.5in |
| Blade Width - LGP | 126.7in |
| Blade Height - Intermediate | 39.8in |
| Blade Height - XL | 42.2in |
| Blade Height - LGP | 39.8in |
| Blade Capacity - Intermediate | 2.73yd³ |
| Blade Capacity - XL | 2.86yd³ |
| Blade Capacity - LGP | 3.06yd³ |
| Digging Depth - Intermediate | 22.5in |
| Digging Depth - XL | 23.1in |
| Digging Depth - LGP | 22.5in |