G3516C Gas Generator Set
THE RUNDOWN
Cat® Engine
- Designed for maximum performance on low pressure gaseous fuel supply
- Robust high speed block design provides prolonged life and lower owning and operating costs
- High percentage of component commonality with diesel engines
- Island-Mode capability
Cat G3516C Gas Engine
- Robust high speed block design provides prolonged life and lower owning operationg costs
- Designed for maximum performance on low pressure pipeline natural gas
- Simple open chamber combustion system for reliability and fuel flexibility
- Leading edge technology in ignition system and air/fuel ratio control for lower emission and engine efficiency
- One electronic control module handles all engine functions: ignition, governing, air/fuel ratio control and engine protection
Generator Set Package
- Reliability verified through torsional vibration, fuel consumption, oil consumption, transient performance, and endurance testing
- Top tier electrical efficiency
SR4B Generator
- Designed to match performance and output characteristics of Caterpillar gas engines
- Industry leading mechanical and electrical design
- High efficiency
Generators
- Superior motor starting capability minimizes need for oversizing generator
- Designed to match performance and output characteristics of Cat engines
- High-efficiency design
EMCP 4.3 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Applications
- Cat generator sets are capable of maximizing power production opportunities in an extensive range of industries
EMCP 4 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirements
- Expansion modules and site specific programming for specific customer requirements
Warranty
- 12 months/unlimited hour warranty for continuous ratings
- Extended service protection is available to provide extended coverage options
Emissions
- Meets most worldwide emissions requirements down to 0.5 g/bhp-hr NOx level without aftertreatment
Worldwide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Proven System
- Field proven in a wide range of applications worldwide
- Fully prototype tested
- Certified torsional vibration analysis available
Financing
- Caterpillar offers an array of financial products to help you succeed through financial service excellence
- Options include loans, finance lease, operating lease, working capital, and revolving line of credit
- Contact your local Cat dealer for availability in your region
Full Range of Attachments
- Wide range of bolt-on system expansion attachments
- Factory designed and tested
- Flexible packaging options for easy and cost effective installation
Worldwide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Generator Set Specifications
| Continuous Rating | 1555 ekW |
| Fuel Type | CMM |
| Maximum Electrical Efficiency | 37.70% |
| Maximum Standby Rating | 1500 |
| Frequency | 50 / 60 Hz |
| RPM | 1500/1800 |
Engine Specifications
| Engine Model | G3516C |
| Displacement | 4210in³ |
| Aspiration | TA |
| Bore | 6.7in |
| Stroke | 7.5in |
Generator Set Dimensions
| Length | 219in |
| Width | 72in |
| Height | 92in |
| Dry Weight - Genset | 31226lb |
Standard Equipment
Air Inlet
- Two-element single-stage air cleaner with enclosure and service indicator
Control Panels
- EMCP 4.3
Exhaust
- Integrated Sensing Module (ISM)
- Cat-flanged face outlet on turbocharger
- Provides exhaust port temperatures and stack temperature to customer supplied screen via CCM
- Dry exhaust manifolds, insulated and shielded
Ignition System
- Individual Cylinder Detonation Sensitive Timing (DST)
- Electronic Ignition System (controlled by ECM)
Generator
- Anti-condensation space heater
- Busbar connections
- Class H Insulation & Class F temperature rise
- Reactive Droop
- Permanent Magnet Excitation
- 3-phase brushless, salient pole
- Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control
- SR4B
- Winding temperature detectors
Air Cleaner
- Standard Duty
General
- RH Service
- Operation and maintenance manuals
- Crankshaft Vibration Damper and Guard
- Parts Book
Starting
- Standard electric starter
Starting/Charging
- 24V starting motors
Cooling
- Jacket water and SCAC driven pumps and bypass lines
- 2nd Stage SCAC-Cat Flange
- Engine driven water pumps for jacket water and aftercooler
- Jacket water and SCAC thermostats
- ANSI/DN customer flange connections for JW inlet and outlet
- Cat flanges on SCAC circuit
- No Radiator
Fuel System
- 24V ETR Gas Shutoff Valve
- Engine installed, fuel metering valve
- Throttle plate, 24V DC actuator, controlled by ECM
- Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
- Fuel Filter
- Electronic fuel metering valve
- Low coal mine methane gas
Crankcase Ventilation System
- Crankcase Breather
- Explosion relief valve
Mounting System
- Rails
Controller
- EMCP 4.3
Telematics
- Ethernet
Alternator
- Form wound
- Permanent Magnet (PM) Excitation
Alternator Temperature rise (over 40°C ambient)
- 80°C
Alternator attachments
- Digital Voltage Regulator (DVR)
Power Termination
- Busbar
Optional Equipment
Air Inlet
- Vertical, horizontal dual element air cleaner
- Enclosure mounting brackets and piping
- Air cleaner with precleaner
Control Panel
- Local NFPA99-110 Alarm Module w/LEDs
- Synchronizing Module
- Remote 24V 8/16 Light Annunciator
- Engine Failure Relay
- PL1000E/PL1000T Communications Module
- Custom 8-Light Alarm Module
Air Cleaner
- Dual element single stage with enclosure and service indicator
- Heavy Duty
Exhaust
- Flexible Fittings
- 14" Flange Kit
- 406 mm Elbow Kits
- 406 mm flange kits
- Mufflers (15/18/25 dBA Attenuation) and spark-arresting muffler with ANSI companion flanges
- 16" Spark Arresting Muffler
- 356-406mm Flange and Exhaust Expander
- 15/18/25 dBA Muffler Attenuation
Generator
- Cable access box
- 8.7/15 kV Cross, Differential, Current Transformers (CCCT, DCT, CT)
- Medium and high voltage generators and attachment
- 480/4160/13200 Volt Generator Options (60 Hz)
- Generator air filter
- Bearing temperature detectors
- European Bus Bars
- 415/400/380, 3300/6600/11000 Volt Generator Options (50 Hz)
- Annunciator Modules
- Generator Removal
- Low voltage extension box
Governing System
- Load share module
General
- Special paint order
- Tool set
- US AID Emblem
- Barring group
- Digital diagnostic tool
Starting
- Oversized batteries
- Charging Alternator - 60A (requires engine driven pumps)
- Battery charger - 20A
- Jacket water heater
Starting/Charging
- 60A, 24V charging alternator (requires engine driven pumps)
- Battery removal
- 20A battery charger
- Battery disconnect switch
- Battery with cables and rack (shipped loose)
Cooling
- Inlet/Outlet connections
- Jacket water coolant heater
- Aftercooler air lines, aftercooler core replacement
- JW & SCAC engine driven pumps
- JW outlet connection (RH or LH)
Fuel System
- 207-276kPa, 30-40 psi gas knockdown regulator
- 14-69 kPa (2-10 psi) gas pressure regulator
- 24VDC Gas Shutoff Valve, Gas Knockdown Regulator
- Fuel Filter, Gas Filter
- Shutoff Solenoid
Lubrication System
- Oil: Ultra 40 (ship oil filled or dry)
Muffler
- Industrial grade (15 dB)
- Critical grade (25 dB)
- Spark arresting
Mounting System
- Spring vibration Isolators
Controller attachments
- Local annunciator module
- Load Share module
- Modbus Local PC monitoring (converter)
- Modbus Remote PC monitoring (converter and modem)
Alternator Output Voltage
- 6300V
- 10500V
Alternator attachments
- Differential CT