G3512 1000kW Gas Generator Set
THE RUNDOWN
Cat G3512 Gas Engine
- Robust high speed block design provides prolonged life and lower owning operationg costs
- Designed for maximum performance on low pressure pipeline natural gas and hydrogen blends
- Simple open chamber combustion system for reliability and fuel flexibility
- Leading edge technology in ignition system and air/fuel ratio control for lower emission and engine efficiency
- One electronic control module handles all engine functions: ignition, governing, air/fuel ratio control and engine protection
SR5 Generator
- Designed to match performance and output characteristics of Cat gas engines
- Industry leading mechanical and electrical design
- High efficiency
Cat ECS 100 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Cat ECS 100 Control Panel
Cooling System
- Designed to operate in standard ambient temperatures up to 43°C (110°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Emissions
- EPA Certified for use in Emergency and Non-Emergency applications
- Additional a NOx selectable genset is available to meets most worldwide emissions requirements down to 0.5 g/bhp-hr NOx level without aftertreatment
Proven System
- Field proven in a wide range of applications worldwide
- Fully prototype tested
- Certified torsional vibration analysis available
Full Range of Attachments
- Wide range of bolt-on system expansion attachments
- Factory designed and tested
- Flexible packaging options for easy and cost effective installation
Worldwide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Generator Set Specifications
| Gas Standby Rating | 1000 ekW @ 0.8pf |
| Fuel Type | Natural Gas, Hydrogen Blend (up to 5%) |
| Emissions/Fuel Strategy | U.S. EPA Certified for Non-Emergency Stationary Genset |
| RPM | 1800 rpm |
| Frequency | 60 Hz |
| Displacement | 3173in³ |
| Compression Ratio | 9.7 |
Engine Specifications
| Engine Model | G3512 |
| Displacement | 3173in³ |
| Aspiration | TA |
| Bore | 6.7in |
| Stroke | 7.5in |
Generator Set Dimensions
| Length | 205.7in |
| Width | 90in |
| Height | 99.4in |
| Weight | 27500lb |
Standard Equipment
Air Inlet
- Two-element single-stage air cleaner with enclosure and service indicator
- Dual air cleaners, 1 per side, with service indicator
Control Panel
- Cat ECS 100
Cooling System
- Engine driven pumps for jacket water and separate circuit aftercooler
Exhaust
- Dry exhaust manifolds, insulated and shielded
- Individual exhaust port and turbocharger outlet wired to integrated temperature sensing module (ITSM) with GCEM providing alarms and shutdowns
- Cat-flanged face outlet on turbocharger
Fuel
- NOx sensor based air-fuel-ratio control
- Pipeline Natural Gas: 800-1000 BTU/scf and 70-100 Methane Number
- Gas Train: NFPA37 and CSA B149.3
- 0.5 to 5 psi engine fuel inlet pressure
Fuel System
- Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
- Engine-installed electronic control valve
- Throttle plate, 24V DC actuator, controlled by GECM
- 24V DC energized-to-run (ETR) gas shutoff valve
- Gas pressure regulator
Air Cleaner
- Dual element single stage with enclosure and service indicator
General
- Operation and maintenance manuals
- Paint- Caterpillar Yellow except rails and radiators gloss black
- Parts book
- “Stationary Use Only” Label in Correspondence with EPA Nonroad Mobile SI rule
- RH Service
- Crankshaft vibration damper and guard
Lubrication
- Cartridge style oil filter
- Gear type lube oil pump
Starting/Charging
- Jacket water heater
- Battery with cables and rack (shipped loose)
- Electric Starter
- Batteries with rack and cables
- 24V DC starting motors
Generator
- NEMA Class H insulation
- Permanent Magnet Excitation
- SR5
- Anti-condensation space heater
- Caterpillar's Digital Voltage Regulator (CDVR) including reactive droop capability, 3-phase voltage sensing, KVAR/PF modes, RFI suppression, and a min/max exciter
- Winding temperature detectors
Ignition System
- Electronic Ignition System (controlled by ADEM A4)
- Individual Cylinder Detonation Sensitive Timing (DST)
Starting
- Dual electric starters
Governing
- ADEM A4 speed governor with 4 to 20ma (0V to 5V) speed input
Cooling
- Package mounted radiator
- Jacket water and SCAC engine-driven pumps
- Jacket water and SCAC thermostats
- LH or RG connections when radiator is not selected
- Standard Ambient Radiator
- JW & SCAC engine driven pumps
Mounting System
- Rails
Controller
- Cat ECS 100
Telematics
- Ethernet
Alternator
- Random wound
- Permanent Magnet (PM) Excitation
Alternator attachments
- Integrated Voltage Regulator (IVR)
- Stator and bearing temperature monitoring and protection
Power Termination
- Busbar NEMA
Certifications
- ICES for Canada
Optional Equipment
Air Inlet
- Mounting brackets and piping
- Air cleaner with precleaner
Control Panel
- Local PC monitoring
- Engine failure relay
- Remote PC monitoring
- Local alarm module
- Remote annunciator
Circuit Breakers
- 2000A 3 Pole, UL-100% Rated Masterpact Circuit Breakers
- Frame mounting
- S LSI, G LSIG, P LSIG-P, 4th Digit Type
- Right, left, rear mounted
- 1600A, 2000A 3 Pole, UL-100% Rated R-Frame Circuit Breakers
- 100% rated, 3-pole (UL/CSA/IEC) 5th Digit Rating
- 3-pole (IEC 947-2 rated)
- 1200A, 3 Pole, UL-100% Rated P-Frame Circuit Breakers
Exhaust
- 305 mm (12 in.) flange
- Flexible fittings
- 18, 25 dBA Attenuation
- 305 mm (12 in.) muffler
- 305mm (12 in) spark arresting muffler
- 305 mm (12in.) elbow
General
- US AID emblem
- Special paint order
- Digital diagnostic tool
- Tool set
Generator
- Generator air filter
- European bus bars
- Low voltage extension box
- Cable access box
- Bearing temperature detectors
Starting/Charging
- 20A, 24VDC battery charger
- 24V starting motors
- 45A, 24V charging alternator (requires engine driven pumps)
Grid Code Compliance
- 60 Hz: USA
Starting
- Charging Alternator - 45A
- Battery charger - 20A
- Battery charger - 35A
- Jacket water heater
Cooling
- Remote radiator for JW and SCAC circuits, level switch included but not wired
- Inlet/Outlet connections
- Coolant level drain line with valves, fan with guard
- No Radiator
- JW outlet connection (RH or LH)
Fuel System
- 3, 0-100 kPag, 4-20mA gas train pressure sensors
- Gas Train (NFPA/CSA)
- Gas Pressure Sensor
- Double Shutoff Solenoid
- Gas Knockdown Regulator
Lubrication System
- Oil level regulator
- Electric pre-lube pump
Crankcase Ventilation System
- Positive crankcase ventilation
- Explosion relief valve
Muffler
- Industrial grade (15 dB)
- Residential grade (18 dB)
- Spark arresting
- Exhaust SCR System
Mounting System
- Rubber
- Spring vibration Isolators
- Seismic rated vibration isolators
Controller
- Cat ECS 200
Controller attachments
- Remote annunciator module
- Remote HMI Panel
- Discrete I/O module
- CAN2 wiring
- Remote monitoring software
Telematics
- Cellular
Alternator
- Form wound
Alternator Temperature rise (over 40°C ambient)
- 80°C
- 105°C
- 125°C
- 150°C
Alternator Output Voltage
- 440V
- 480V
- 600V
- 2400V
- 4160V
Alternator attachments
- Anti-condensation space heater
- Current Transformer (CT)
Power termination
- Circuit breaker
Circuit breaker
- 1200A
- 1600A
- 2000A
- UL
- 3-pole
- Manually operated
- Electrically operated
Trip Unit
- LSI
- LSI-G
- LSI-P
- LSIG-P
- UV
Ancilliary Equipment
- Automatic transfer switch (ATS)
- Paralleling switchgear
- Paralleling controls
Enclosure
- Weatherproof
- Sound attenuated (80 dBA)
Certifications
- UL 2200 Listed
Extended service terms
- 2 year
- 3 year
- 5 year
- 10 year
Extended service coverage
- Silver
- Gold
- Platinum
- Platinum plus