C9 (60 Hz)

C9 Generator Set

THE RUNDOWN

Cat Generator Set Package
  • Cat generator set packages have been fully prototype tested
  • Accepts 100% block load in one step and meets NFPA 110 loading requirements
  • Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
SR5 Alternator
  • Superior motor starting capability minimizes need for oversizing alternator
  • Designed to match performance and output characteristics of Cat diesel engines
  • Robust Class H insulation
GCCP Control Panel
  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirement
  • Expansion modules and site-specific programming for specific customer requirements
Cooling System
  • Designed to operate in standard ambient temperatures up to 50°C (122°F)
  • Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
  • Designed to meet applicable global standards including ISO 8528, ISO 3046 and IEC 60034-1, with CSA, UL2200, IBC, NEMA and NFPA conformity available depending on configuration and market.
One Safe Source
  • Components used in the generator set are selected based on seamless design integration to provide the optimum performance
  • The generator set is fully assembled at a Caterpillar facility following our quality guidelines
  • Each generator set package is tested before leaving the Caterpillar facility
  • Cat product support, including dealer service, parts and warranty covers the entire Cat power system
Worldwide Product Support
  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Generator Set Specifications
Standby Rating200/250/300 ekW
Maximum Rating300 ekW
Prime Power Rating180/225/275 ekW
Minimum Rating180 ekW
Emissions/Fuel StrategyU.S. EPA Tier 3 Certified
Voltage220 to 480 Volts
Frequency60 Hz
Speed1800 rpm
Duty CycleStandby, Prime
Engine Specifications
Engine ModelC9 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Bore4.41in
Stroke5.87in
Displacement537.01in³
Compression Ratio16.1:1
AspirationAir to Air Aftercooled
Fuel SystemHydraulic electronic unit injection
Governor TypeAdem™A4
Generator Set Dimensions
Length - Maximum157in
Width - Maximum47.5in
Height - Maximum73.5in
Standard Equipment

Air Inlet System

  • Turbocharger
  • Air cleaner, light duty with disposable paper filter
  • Aftercooler core

Exhaust System

  • Exhaust manifold - dry
  • Stainless steel exhaust flex, gaskets, rain cap & SAE exhaust flange for customer use - shipped loose

Control Panels

  • GCCP 1.2

Cooling System

  • Caterpillar extended life coolant
  • Fan drive, battery charging alternator drive
  • Coolant drain line with valve
  • Radiator and cooling fan with guard

Fuel System

  • Narrow skid base
  • Fuel cooler
  • Primary fuel filter w/integral water separator and secondary filter
  • Integral tank base
  • Fuel priming pump

Generators and Generator Attachments

  • Mandatory option circuit breaker, IEC, 3 pole mounted in power centre
  • Cold weather bundle
  • Current transformers
  • Segregated low voltage (AC/DC) wiring panel
  • Insulation Class H and temperature rise
  • Power centre, IP22
  • Brushless, self-excited 2/3 pitch, random wound
  • Automatics voltage regulator

Governing System

  • Cat electronic governor (ADEM A4)

Mounting System

  • Captive linear vibration isolators between base and engine-generator
  • Includes lifting provisions and termination points for coolant and lube oil drain lines

Starting / Charging System

  • Standard / Oversized batteries

General

  • Engine and alternator re-paint, Caterpillar yellow

Telematics

  • Cat® Product Link™ PL444 cellular

Lube System

  • Oil cooler
  • Oil drain valves
  • Fumes disposal, piped to front of radiator
  • Lubricating oil
  • Oil filter and dipstick
  • Oil drain lines with valve; piped to edge of base
Optional Equipment

Certifications

  • IBC / HCAI
  • Global Certification for CIS

Air inlet system

  • Single element air cleaner

Circuit breakers

  • Single / Dual / Third

Control Panels

  • Load center / GFCI receptacle / I/O expansion module
  • GCCP 1.5

Cooling System

  • Radiator duct flange
  • Low coolant temperature alarm

Enclosures

  • Sound attenuated Level 1 / Level 2 (Steel / Aluminium)
  • Weather protective

Exhaust System

  • 5 - 6 inch flange adaptor
  • 6 inch flange
  • Mufflers - End in/end out; 10 dBA or 25 dBA attenuation
  • 5 and 6 inch elbow kits

Fuel System

  • Sub base tanks
  • Integral dual wall fuel tank base

Generators and Attachments

  • Permanent magnet excitation (PMG) generator
  • Oversize, AREP, CIP generators

Mounting System

  • Narrow skid base

Starting / Charging System

  • Jacket water heater
  • 10A Battery charger
  • Battery disconnet switch