C7.1 (60 Hz)

C7.1 Generator Set

THE RUNDOWN

Cat Generator Set Package
  • Cat generator set packages have been fully prototype tested
  • Meets NFPA 110 loading requirements
  • Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
Alternator
  • Superior motor starting capability minimizes need for oversizing alternator
  • Designed to match performance and output characteristics of Cat diesel engines
  • Robust Class H insulation
GCCP 1.2 Control Panel
  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirement
  • Expansion modules and site-specific programming for specific customer requirements
  • Image may not be a representative of actual product
Cooling System
  • Designed to operate in standard ambient temperatures up to 55°C (131°F)
  • Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
Designed to meet applicable global standards including ISO 8528, ISO 3046 and IEC 60034-1, with CSA, UL2200, IBC, NEMA and NFPA conformity available depending on configuration and market.
One Safe Source
  • Components used in the generator set are selected based on seamless design integration to provide the optimum performance
  • The generator set is fully assembled at a Caterpillar facility following our quality guidelines
  • Each generator set package is tested before leaving the Caterpillar facility
  • Cat product support, including dealer service, parts and warranty covers the entire Cat power system
Worldwide Product Support
  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Generator Set Specifications
Standby Rating125/150/175/200 ekW
Maximum Rating200 ekW
Prime Power Rating114/135/158 ekW
Minimum Rating114 ekW
Emissions/Fuel StrategyU.S. EPA Tier 3 Certified
Voltage208 to 480 Volts
Frequency60 Hz
Speed1800 rpm
Duty CycleStandby, Prime
Engine Specifications
Engine ModelC7.1 I-6, 4-Cycle Diesel
Bore4.13in
Stroke5.31in
Displacement427.8in³
Compression Ratio16.5:1
AspirationTurbocharged, Air to Air Aftercooled
Fuel SystemCommon Rail
Governor TypeADEM™A4
Generator Set Dimensions
Length - Maximum98.4in
Width - Maximum52in
Height - Maximum64in
Standard Equipment

Air Inlet System

  • Light duty standard air cleaner

Control Panels

  • GCCP 1.2

Cooling System

  • Radiator and cooling fan with guards
  • Coolant drain line with valves
  • Fan drive, battery charging alternator drive
  • Caterpillar extended life coolant

Generator and Generator Attachments

  • Circuit breaker, IEC, 3 pole, mounted in tower panel
  • 12 Leads
  • IP23 Protection
  • Voltage regulator (single phase sensing)
  • Segregated low voltage (AC/DC) wiring panel
  • Tower panel, IP22, bottom cable entry

Exhaust System

  • 10,25,35 dBA Mufflers

Fuel System

  • Skid base fuel tank
  • Sub base fuel tanks

Lube System

  • Lubricating oil
  • Oil drain line with valve

Mounting System

  • Vibration isolators
  • Termination points for coolant and lube oil drain lines
  • Includes lifting provision and drag points

Starting / Charging System

  • 24V battery with rack and cables

Telematics

  • Cat® Product Link™ PL444 cellular

Governing System

  • Mechanical and electrical governing system - model dependent

General

  • Engine and alternator pre-paint, Caterpillar yellow
Optional Equipment

Alternator System

  • R Frame auxiliary winding: R2273L4 SE aux alt 07, aux alt 08 and aux alt 10
  • Permanent magnet excitation (PMG)
  • 3 Phase sensing
  • Automatic voltage regulator
  • Alternator removal
  • Space heater
  • Quatrature droop king

Circuit breakers

  • Padlockable breaker device
  • Single / Dual / 100% rated

Control Panel Options

  • Speed adjust contacts
  • Overload shutdown via breaker
  • Volt free contacts
  • Earth leakage (2 wire only)
  • Emergency stop with key
  • Battery charger
  • NFPA 110 bundle
  • Earth fault (2 wire only)
  • Speed adjust potentiometer

Control System

  • I/O expansion module, GFCI receptacle
  • Volt free contacts for generator set running
  • Control panel heater
  • Volt free contacts for common alarm
  • Lube oil sump heater

Cooling System

  • Low coolant level shutdown
  • Low coolant temperature
  • Coolant heater

European Certifications

  • Upgrade to STD set for CE

Enclosures

  • Sound attenuated Level 1 / Level 2, Weather Protective
  • Rental options (CAE only) - CEE form sockets for enclosure
  • Rental options (CAE only) - Socket blanking plate
  • Rental options (CAE only) - Rental pack
  • Rental options (CAE only) - Single point lift

Mounting Options

  • Silencer installation kit
  • Battery removal
  • Electronic governor
  • Residential silencer
  • Industrial silencer removal

Fuel Systems

  • Compact skidbase for open sets
  • Low fuel level shutdown
  • DEFRA bunded fuel tank
  • Skidbase for CALG enclosure sets
  • Low fuel level alarm
  • Fuel level alarms
  • Open set narrow tankbase

Test Reports

  • PGS Test report @ 0.8 power factor
  • PGS Test report @ 1.0 power factor

General

  • Stone guards/radiator trans flange

Global Certifications

  • IBC, HCAI, UL2200

Power Termination

  • Circuit breaker, IEC, 4 pole

Accessories / Miscellaneous

  • Packing case - canopied set
  • Packing case - compact set