C3.3 Generator Set
THE RUNDOWN
Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
GCCP 1.3 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
- Image may not be a representative of actual product
Cooling System
- Designed to operate in standard ambient temperatures up to 50°C (122°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
Designed to meet applicable global standards including ISO 8528, ISO 3046 and IEC 60034-1, with CE, UKCA and EAC conformity available depending on configuration and market.
One Safe Source
- Components used in the generator set are selected based on seamless design integration to provide the optimum performance
- The generator set is fully assembled at a Caterpillar facility following our quality guidelines
- Each generator set package is tested before leaving the Caterpillar facility
- Cat product support, including dealer service, parts and warranty covers the entire Cat power system
World Wide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Generator Set Specifications
| Standby Rating | 26/33/40/50 kVA |
| Maximum Rating | 65.0 kVA |
| Prime Power Rating | 24/30/36/45 kVA |
| Minimum Rating | 24.0 kVA |
| Emissions/Fuel Strategy | Low BSFC / EU Stage II / EU Stage IIIA |
| Voltage | 110 to 480 Volts |
| Frequency | 50 Hz |
| Speed | 1500 rpm |
| Duty Cycle | Standby, Prime |
Engine Specifications
| Engine Model | Cat® C3.3 |
| Bore | 4.1in |
| Stroke | 5in |
| Displacement | 201.4in³ |
| Compression Ratio | 17.25:1, 19.25:1 |
| Aspiration | Turbocharged |
| Fuel System | Direct Injection |
| Governor Type | Mechanical |
Generator Set Dimensions
| Length - Maximum | 43.9in |
| Width - Maximum | 38.2in |
| Height - Maximum | 53.6in |
Standard Equipment
Air Inlet System
- Air cleaner; light duty with disposable element
Control Panel
- GCCP 1.3
Cooling System
- Coolant drain line with valve
- Radiator and cooling fan with guards
- Caterpillar extended life coolant
- Fan drive, Battery charging alternator drive
Exhaust System
- Stub pipe, Gaskets, Raincap & SAE Exhaust flange
Fuel System
- Standard open set fuel tank base
- Single wall integral 8-hour fuel tank
Generators and Generator Attachments
- Voltage regulator
- Tower panel, IP22, bottom cable entry
- 3-Pole and 4-Pole Circuit Breaker
- IP23 Protection
- Segregated low voltage (AC/DC) wiring panel
Governing System
- Mechanical / Electronic
Generators and attachments
- 12 Leads
Lube System
- Lubricating oil
- Oil drain line with valve
Mounting System
- Captive linear vibration isolators
- Termination points for coolant and lube oil drain lines
- Includes lifting provision and drag points
Starting / Charging System
- Standard Battery
General
- Caterpillar yellow paint
Telematics
- Cat® Product Link™ PL444 cellular
Optional Equipment
Alternator System
- R Frame auxilliary winding
- Anti-condensation heater
- Coastal ingress protection
- LC Frame alternator
- Permanent magnet excitation (PMG)
Circuit breakers
- Padlockable breaker device
- 3-Pole and 4-Pole Circuit breaker
Control Panels
- GCCP 1.3
Control Panel Options
- Emergency stop with key
Cooling System
- Low coolant level shutdown
- Coolant heater
- Low coolant temperature alarm
Certifications
- Global Certification for CIS
- CE certification
Enclosures
- Sound Attenuated Level 1
- CEE for sockets for enclosure
- Sound Attenuated Level 2
- Rental pack (CAE only)
- Socket blanking plate
Fuel Tank
- Integral Dual Wall / 1000L Capacity
- Integral Single Wall / 1000L Capacity
Fuel System
- High fuel level alarm
- Low fuel level shutdown
- Low fuel level alarm
- Skidbase for CALG enclosure sets
- Bunded fuel tank
Mounting Options
- Electronic governor
- Battery removal
- Residential silencer
- Silencer installation kit
- External single point lift - enclosure
Special Packing Inspections
- PGS Test report @ 0.8 power factor
- PGS Test report @ 1.0 power factor
General
- Packing case - compact set
- Packing case - canopied set