C280-6 Generator Set (Medium Speed)
THE RUNDOWN
Cat Diesel Engine
Cat® Diesel Engine
- Designed and optimized for Marine EPA Tier 4 or IMO Tier 2 emissions
- Reliable, rugged, durable design
Cat® Diesel Engine
SR5 Alternator
Alternators
- Superior motor starting capability minimizes need for oversizing generator
- Matched to the performance and output characteristics of Cat engines
Alternators
Generator Set Package
- Fully prototype tested with certified torsional vibration analysis available
Worldwide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Full Range of Attachments
Cat Generator Set Monitoring System (GSM)
- Simple user friendly interface and navigation
- Provides protection, monitoring, and control of the diesel generator set
- Redundant shutdown protection
- 10 inch (254 mm) color monitor to display all engine parameters and alarm annunciation
- Annunciation of all engine shutdowns, alarms, and status points
- Start/prelube control switch, fuel control switch and emergency stop buttons
- Speed control switch with automatic changing to ball head control when a governor failure occurs, if ball head control is available
- Contacts are available for customer use
- Selection of local/remote control of engine
- Selection of idle/rated control of engine
- Equipped for remote communication
- Four 4-20mA outputs (programmable)
- Relay contact signals to the remote monitoring system (summary shutdown, summary alarm, local operation/remote, engine running, PLC failure, fuel control and idle/rated)
Generator Set Specifications
| Maximum Rating | 1820 ekW (60Hz), 2425 kVA (50Hz) |
| Minimum Rating | 1650 ekW (60Hz), 2200 kVA (50Hz) |
| Emissions/Fuel Strategy | IMO Tier 2 |
| Frequency | 50 / 60 Hz |
| Speed | 900 / 1000 rpm |
| Duty Cycle | Prime, Continuous |
Engine Specifications
| Engine Model | C280-6, I-6,4-Stroke Water-Cooled Diesel |
| Bore | 11in |
| Stroke | 11.8in |
| Displacement | 111in³ |
| Compression Ratio | 13:01 |
| Aspiration | TA |
| Fuel System | Direct unit injection |
| Governor Type | Generator Set Monitoring System (GMS) |
Generator Set Dimensions
| Length - Maximum | 404in |
| Width - Maximum | 99.62in |
| Height - Maximum | 156.6in |
| Dry Weight - Genset (maximum) | 74970lb |
Standard Equipment
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
- Air inlet shutoff
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
- Breather, crankcase, top-mounted
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Cooling System
- Water temperature regulator
- Engine coolant water drains
- Jacket water thermostats
Exhaust System
- Includes adapter, flexible exhaust fitting
- Dry, gas tight, exhaust manifold
- 457 mm (18 in) Cat bolt pattern
Fuel System
- Simplex or duplex
Generator System
- Custom generator per generator data sheet completed by dealer
Governor System
- UG Actuator
Lube System
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Centrifugal oil filters with single shutoff
- Service side engine mounted on cylinder block inspection covers
- Crankcase explosion relief valves
- Oil filler and dipstick
- Oil pressure regulating valve
Mounting System
- Damper, torsional vibration
- Engine and generator mounting
Starting / Charging System
- Vane type air starter
- Line group for single point custom connection
- Air silencer
- One motor, engine mounted at rear, on left side
General:
- Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water
- Paint, Caterpillar yellow
Optional Equipment
Air Inlet System
- Air inlet adapter
- Soot filter
- Heavy duty air cleaner
- Boost control valve
- Air cleaner louver assembly
- Air cleaner
- Vertical support bracket
Cooling System
- Auxiliary water pump
- Cooling system aids
- Heating aids
- Expansion tank
Exhaust System
- Weld flange and related hardware
- Flexible exhaust fittings
Fuel System
- Fuel system connections
- Fuel priming pump
- Duplex primary fuel strainer
Generator System
- Class F insulation
- 3 Phase, six Leads, WYE
- Busbar connections
- Winding temperature detectors
- Anti-condensation space heaters
Governor System
- 723 Plus
- Digital programmers
- Electronic/actuators
- Battery backup/power supply
- 2301 A load share
- EGB actuator
Lube System
- Oil pan drain valve
- Lube ANSI adapter (Emergency connection)
Mounting System
- Isolator
- Spring type vibration isolators
- Non-vertically restrained
- Vertically restrained
Starting / Charging System
- Pressure reducing valve
- Compressed air flex hose
General:
- Custom paint colors