C280-12 Generator Set (Medium Speed)
THE RUNDOWN
Cat Diesel Engine
Cat® Diesel Engine
- Designed and optimized for Marine EPA Tier 4 or IMO Tier 2 emissions
- Reliable, rugged, durable design
Cat® Diesel Engine
Generator
Alternators
- Superior motor starting capability minimizes need for oversizing generator
- Matched to the performance and output characteristics of Cat engines
Alternators
Generator Set Package
- Fully prototype tested with certified torsional vibration analysis available
Worldwide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Full Range of Attachments
Cat Generator Set Monitoring System (GSM)
- Simple user friendly interface and navigation
- Provides protection, monitoring, and control of the diesel generator set
- Redundant shutdown protection
- 10 inch (254 mm) color monitor to display all engine parameters and alarm annunciation
- Annunciation of all engine shutdowns, alarms, and status points
- Start/prelube control switch, fuel control switch and emergency stop buttons
- Speed control switch with automatic changing to ball head control when a governor failure occurs, if ball head control is available
- Contacts are available for customer use
- Selection of local/remote control of engine
- Selection of idle/rated control of engine
- Equipped for remote communication
- Four 4-20mA outputs (programmable)
- Relay contact signals to the remote monitoring system (summary shutdown, summary alarm, local operation/remote, engine running, PLC failure, fuel control and idle/rated)
Generator Set Specifications
| Maximum Rating | 3640 ekW (60Hz), 4850 kVA (50Hz) |
| Minimum Rating | 3300 ekW (60Hz), 4400 kVA (50Hz) |
| Emissions/Fuel Strategy | EPA Tier 4 Final, IMO Tier 2 |
| Frequency | 50 / 60 Hz |
| Speed | 900 / 1000 rpm |
| Duty Cycle | Prime, Continuous |
Engine Specifications
| Engine Model | C280-12, V-12,4-Stroke Water-Cooled Diesel |
| Bore | 11in |
| Stroke | 11.8in |
| Displacement | 13524in³ |
| Compression Ratio | 13:01 |
| Aspiration | TA |
| Fuel System | Direct unit injection |
| Governor Type | Generator Set Monitoring System (GMS) |
Generator Set Dimensions
| Length - Maximum | 404in |
| Width - Maximum | 99.62in |
| Height - Maximum | 156.6in |
| Dry Weight - Genset (maximum) | 112690lb |
Standard Equipment
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
- Air cleaner
- Air inlet shutoff
- Breather, crankcase, top-mounted
- Turbocharger, watercooled, engine oil lubricated
- Aftercooler, fresh water, corrosion resistant coated (air side)
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Air Inlet System
Cooling System
- Front mounted turbos
- Jacket water thermostats
- Water temperature regulator
- Engine coolant water drains
- Three-bundle oil cooler
Exhaust System
- 457 mm (18 in) Cat bolt pattern
- Dry, gas tight, exhaust manifold
- Includes adapter, flexible exhaust fitting
Fuel System
- Simplex or duplex
Generator System
- Custom generator per generator data sheet completed by Dealer
Governor System
- UG Actuator
Lube System
- Oil filler and dipstick
- Centrifugal oil filters with single shutoff
- Crankcase explosion relief valves
- Oil pressure regulating valve
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Service side engine mounted on cylinder block inspection covers
Mounting System
- Engine and generator mounting
- Damper, torsional vibration
Starting / Charging System
- Vane type air starter
- Two motors, engine mounted at rear, on left side
- Line group for single point custom connection
- Air silencer
General:
- Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water
- Paint, Caterpillar yellow
Optional Equipment
Air Inlet System
- Boost control valve
- Soot filter
- Heavy duty air cleaner
- Air cleaner louver assembly
- Vertical support bracket
- Air inlet adapter
Cooling System
- Expansion tank
- Heating aids
- Cooling system aids
- Heat exchanger for single circuit
- Auxiliary water pump
Exhaust System
- Weld flange and related hardware
- Flexible exhaust fittings
Fuel System
- Fuel priming pump
- Fuel system connections
- Duplex primary fuel strainer
Generator System
- Anti-condensation space heaters
- Winding temperature detectors
- Busbar connections
- Class F insulation
- 3 Phase, six leads, WYE
Governor System
- Battery backup/power supply
- Electronic/actuators
- 723 Plus
- 230 UA
- EGB actuator
- Digital programmers
Lube System
- Lube ANSI adapter (Emergency connection)
- Oil pan drain valve
Mounting System
- Spring type vibration isolators
- Non-vertically restrained
- Isolator
- Vertically restrained
Starting / Charging System
- Compressed air flex hose
- Turbine type air starters
- Redundant air starters
- Pressure reducing valve
General:
- Custom paint colors