C1.5 Generator Set
THE RUNDOWN
Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
Frame Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
GCCP 1.3 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
- Image may not be a representative of actual product
Cooling System
- Designed to operate in standard ambient temperatures up to 50°C (122°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
Designed to meet applicable global standards including ISO 8528, ISO 3046 and IEC 60034-1, with CE, UKCA and EAC conformity available depending on configuration and market.
One Safe Source
- Components used in the generator set are selected based on seamless design integration to provide the optimum performance
- The generator set is fully assembled at a Caterpillar facility following our quality guidelines
- Each generator set package is tested before leaving the Caterpillar facility
- Cat product support, including dealer service, parts and warranty covers the entire Cat power system
World Wide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Generator Set Specifications
| Maximum Rating | 13.2 ekW |
| Standby Rating | 13/17 ekW |
| Minimum Rating | 12.0 ekW |
| Prime Power Rating | 12/15.5 ekW |
| Emissions/Fuel Strategy | EU Stage IIIA |
| Voltage | 110 to 415 Volts |
| Frequency | 60 Hz |
| Speed | 1800 rpm |
| Duty Cycle | Standby, Prime |
Engine Specifications
| Engine Model | Cat® C1.5 |
| Bore | 3.3in |
| Stroke | 3.5in |
| Displacement | 91.3in³ |
| Compression Ratio | 22.5:1 |
| Aspiration | Naturally Aspirated |
| Fuel System | Indirect Injection |
| Governor Type | Mechanical |
Generator Set Dimensions
| Length - Maximum | 55.1in |
| Width - Maximum | 24.4in |
| Height - Maximum | 41.5in |
Standard Equipment
Air Inlet System
- Liight duty air cleaner with disposable element
Control Panel
- GCCP 1.3
Cooling System
- Radiator and cooling fan with guards
- Coolant drain line with valve
- Fan drive, battery charging alternator drive
- Caterpillar extended life coolant
Exhaust System
- Stub pipe, gaskets, raincap & SAE exhaust flange for customer use - shipped loose
Fuel System
- Single / Dual wall integral fuel tank
- Standard open set fuel tank/base supplied
Generators and Generator Attachments
- Voltage regulator (single phase sensing)
- IP23 Protection
- Segregated low voltage (AC/DC) wiring panel
- Tower panel, IP22, bottom cable entry
- Circuit breaker, IEC, 3 pole, mounted in tower panel
- 12 Leads
Governing System
- Mechanical governing system
Lube System
- Oil drain line with valve
- Lubricating oil
Mounting System
- Captive linear vibration isolators
- includes lifting provisions and termination points for coolant
Starting / Charging System
- Standard battery
General
- Engine and alternator pre-paint, Caterpillar yellow
Telematics
- Cat® Product Link™ PL444 cellular
Optional Equipment
Alternator Options
- Coastal insulation protection
Certificates
- Global certification for CIS
- CE certification
Circuit breakers
- Padlockable breaker device
- 3-Pole and 4-Pole circuit breakers
Control Panel Options
- Emergency stop with key
- Volt free contacts for genset running
- Battery charger
- Volt free contacts for common alarm
- GCCP 1.3
- Battery charger
Cooling System
- Coolant heater
Enclosures
- Sound Attenuated Level 1/2/3
- Single point lift for enclosure
- Steel
- Aluminium
Fuel System
- Low fuel level alarm
- Skidbase for enclosures
- Sub base single / dual wall integral fuel tank
- Fuel transfer control
- Base feet
Mounting Options
- Silencer installation kit
- Industrial silencer removal
Special Test and Inspection
- PGS Test report @ 1.0 power factor
General
- Packing case - canopied set
- Packing Case - compact set
- Radiator stone guard