C1.5 Generator Set
THE RUNDOWN
Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load in one step and meets NFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
M-Frame Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
GCCP 1.3 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
- Image may not be a representative of actual product
Cooling System
- Designed to operate in standard ambient temperatures up to 55°C (131°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
Cat Dealers provide extensive post sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Cat® SOSSM program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products.
One Safe Source
- Components used in the generator set are selected based on seamless design integration to provide the optimum performance
- The generator set is fully assembled at a Caterpillar facility following our quality guidelines
- Each generator set package is tested before leaving the Caterpillar facility
- Cat product support, including dealer service, parts and warranty covers the entire Cat power system
World Wide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Generator Set Specifications
| Maximum Rating | 13.5 kVA |
| Minimum Rating | 10.0 kVA |
| Emissions/Fuel Strategy | R96/EUIIIa Equivalent |
| Voltage | 110 to 415 Volts |
| Frequency | 50 Hz |
| Speed | 1500 rpm |
| Duty Cycle | Standby, Prime |
Engine Specifications
| Engine Model | Cat® C1.5 |
| Bore | 3.3in |
| Stroke | 3.5in |
| Displacement | 91.3in³ |
| Compression Ratio | 22.5:1 |
| Aspiration | Naturally Aspirated |
| Fuel System | Indirect Injection |
| Governor Type | Mechanical |
Generator Set Dimensions
| Length - Maximum | 55.1in |
| Width - Maximum | 24.4in |
| Height - Maximum | 41.5in |
Standard Equipment
Exhaust System
- Stub pipe, gaskets, raincap & SAE exhaust flange for customer use - shipped loose
Control Panel
- GCCP 1.3
Cooling System
- Coolant drain line with valve
- Caterpillar extended life coolant
- Radiator and cooling fan with guards
- Fan drive, battery charging alternator drive
Air Inlet System
- Air cleaner; light duty with disposable element
Fuel System
- Base, formed steel with single wall integral 8-hour fuel tank
- Standard open set fuel tank/base supplied
Generators and Generator Attachments
- Segregated low voltage (AC/DC) wiring panel
- Circuit breaker, IEC, 3 pole, mounted in tower panel
- IP23 Protection
- 12 Leads
- Tower panel, IP22, bottom cable entry
- Voltage regulator (single phase sensing)
Governing System
- Mechanical governing system
Lube System
- Lubricating oil
- Oil drain line with valve
Mounting System
- Captive linear vibration isolators between base and engine-generator
- includes lifting provisions and termination points for coolant
Starting / Charging System
- 12 Volt battery with rack and cables
General
- Engine and alternator pre-paint, Caterpillar yellow
Optional Equipment
Alternator Options
- Coastal insulation protection
Certificates
- European upgrade to STD set for CE certificate
- Global certification for CIS
Circuit breakers
- 4 Pole Circuit breaker
- Padlockable breaker device
Control Panel Options
- Volt free contacts for common alarm
- Volt free contacts for genset running
- Emergency stop with key
- Battery charger
- GCCP 1.3
Cooling System
- Coolant heater
Enclosures
- Aluminium
- Sound attenuated enclosure (GALV)
- Steel
Fuel System
- Low fuel level alarm
- Low fuel level alarm
Mounting Options
- Industrial silencer removal
- Silencer installation kit
- Battery removal
Special Test and Inspection
- PGS Test report @ 1.0 power factor
General
- Radiator stone guard
- Packing Case - compact set
- Packing case - canopied set