C1.1 (60 Hz)

C1.1 Generator Set

THE RUNDOWN

Cat Generator Set Package
  • Cat generator set packages have been fully prototype tested
  • Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
Alternator
  • Superior motor starting capability minimizes need for oversizing alternator
  • Designed to match performance and output characteristics of Cat diesel engines
  • Robust Class H insulation
GCCP 1.3 Control Panel
  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirement
  • Expansion modules and site-specific programming for specific customer requirements
  • Image may not be a representative of actual product
Cooling System
  • Designed to operate in standard ambient temperatures up to 50°C (122°F)
  • Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
Designed to meet applicable global standards including ISO 8528, ISO 3046 and IEC 60034-1, with CE, UKCA and EAC conformity available depending on configuration and market.
One Safe Source
  • Components used in the generator set are selected based on seamless design integration to provide the optimum performance
  • The generator set is fully assembled at a Caterpillar facility following our quality guidelines
  • Each generator set package is tested before leaving the Caterpillar facility
  • Cat product support, including dealer service, parts and warranty covers the entire Cat power system
World Wide Product Support
  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Generator Set Specifications
Standby Rating8.8 ekW
Maximum Rating8.8 ekW
Prime Power Rating8 ekW
Minimum Rating8.0 ekW
Emissions/Fuel StrategyEU Stage IIIA
Voltage110 to 480 Volts
Frequency60 Hz
Speed1800 rpm
Duty CycleStandby, Prime
Engine Specifications
Engine ModelC1.1, In-line 4, 4-cycle diesel
Bore3in
Stroke3.2in
Displacement69in³
Compression Ratio23.0:1
AspirationNaturally Aspirated
Fuel SystemIndirect Injection
Governor TypeMechanical
Generator Set Dimensions
Length - Maximum55.1in
Width - Maximum24.4in
Height - Maximum39.2in
Standard Equipment

Air Inlet System

  • Light duty air cleaner with disposable element

Control Panel

  • GCCP 1.3

Cooling System

  • Coolant drain line with valve
  • Caterpillar extended life coolant
  • Radiator and cooling fan with guards
  • Fan drive, battery charging alternator drive

Exhaust System

  • Stub pipe, gaskets, raincap & SAE exhaust flange for customer use - shipped loose

Fuel System

  • Integral - Dual and Single wall fuel tank
  • Standard open set fuel tank/base supplied

Generators and Generator Attachments

  • 12 Leads
  • IP23 Protection
  • Segregated low voltage (AC/DC) wiring panel
  • Circuit breaker, IEC, 3 pole, mounted in tower panel
  • Automatice Voltage Regulator
  • Tower panel, IP22, bottom cable entry

Governing System

  • Mechanical governing system

Lube System

  • Lubricating oil
  • Oil drain line with valve

Mounting System

  • Includes lifting provisions and termination points for coolant
  • Captive linear vibration isolators

Starting / Charging System

  • Standard Battery

General

  • Engine and alternator pre-paint, Caterpillar yellow

Telematics

  • Cat® Product Link™ PL444 cellular
Optional Equipment

Alternator Options

  • Coastal insulation protection

Certificates

  • European upgrade to STD set for CE certificate
  • Global certification for CIS

Circuit breakers

  • Padlockable breaker device
  • 3-Pole and 4-Pole Circuit breaker

Control Panel

  • Battery charger
  • Volt free contacts for common alarm
  • Volt free contacts for genset running
  • Emergency stop with key
  • GCCP 1.3

Cooling System

  • Coolant heater

Enclosures

  • Steel and Aluminium
  • Sound attenuated Level 1/ Level 2 / Level 3

Fuel System

  • Sub base - Single and Dual wall fuel tanks
  • Base feet
  • 1000 hr extended service interval
  • Skidbase for enclosures
  • Skidbase for open sets
  • DEFRA bunded fuel tank
  • Low fuel level alarm

Mounting Options

  • Industrial silencer removal
  • Battery removal
  • Silencer installation kit

Special Test and Inspection

  • PGS Test report @ 1.0 power factor

General

  • Radiator stone guard
  • Packing case - canopied set
  • Packing case - compact set