657

657 Wheel Tractor-Scraper

THE RUNDOWN

BE MORE PRODUCTIVE
Be more productive
  • Advanced Productivity Electronic Control System (APECS) allows the engine and transmission to communicate on a high level. This communication enables the machine to better utilize the power and torque the engine is producing. The net result is moving more material.
  • Use Ground Speed Control to set the desired top speed, and the machine will find the gear that works best for the engine and the transmission, providing a lower fuel burn.
  • The Machine Speed Limit feature replaces Top Gear Selection.
  • Auto-Stall assists in quickly bringing the transmission to an operating temperature at start-up when the machine is working in a cold climate regions.
  • Cat Payload for scrapers is an earthmoving solution for optimal payload and job site efficiency. Cat Payload achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Cat Payload is optimized to be used with Sequence Assist, which provides increased productivity with less operator effort.
WORK IN COMFORT
Work in comfort
  • Steer with less effort with the newly designed High-Pressure Steering system.
  • Reduce up to 14 individual operator commands per cycle with
    Sequence Assist (optional attachment).
  • Enjoy interior improvements and a more ergonomic work environment
    with a 21% larger cab than the 657 G-Series cabs.
  • Intuitive, ergonomic controls with multifunction display keep operators focused on their work.
  • Maintain desired cab temperature with Automatic
    Temperature Control.
DESIGNED FOR SAFETY
Designed for safety
  • Get in and out of the cab easier with the new powered access
    ladder system.
  • Enhance an operator’s awareness of the site surroundings with the
    Work Area Vision System (WAVS).
  • Convenient ground-level access to fuel fill and multiple
    maintenance points, ensuring safer and more efficient service.
  • Seat belt indicator provides visual and audible alerts when the seat belt is not in use.
  • The fuel fill, fuel filter, engine oil filter, engine oil change, and water drain are easily accessible at ground level.


EASY TO OPERATE
Easy to operate
  • Cat Advance Ride Management (ARM) seat suspension reduces end stroke movement of the load cylinder for a smoother ride.
  • Engine overspeed protection will automatically engage with no operator input when the machine is in eighth gear. The machine will assist in slowing the machine speed by canceling the throttle command and engaging the engine compression brake.
  • The spacious cab features easy, intuitive controls and excellent
    visibility. The cab provides a comfortable working environment for
    all-day operation.
INTEGRATED CAT TECHNOLOGIES
  • Access information anytime, anywhere with VisionLinkTM –
    use it to make informed decisions that boost productivity, lower
    costs, simplify maintenance, and improve safety and security
    on your jobsite.
  • Product Link™ collects machine data that can be viewed online
    through web and mobile applications (optional attachment).
  • Hit target grade faster and more accurately with Cat Grade
    technologies. Finish jobs in fewer passes and with less operator
    effort, saving you time and helping to increase profit.
  • Monitor, manage, and enhance jobsite operations.
EXECUTE EFFICIENCY
  • The Cat C18 tractor and C15 scraper engines meet U.S. EPA Tier 4 Final and EU Stage V emission standards, contributing to
    lower fuel consumption.
  • The tractor hydraulic on-demand fan helps assist in lower
    fuel consumption.
  • Cat Grade (optional attachment) intelligently ensures the machine
    does not cut below grade in a cut area or overfill in the fill area.
Engine
Tractor EngineCat® C18
Scraper EngineCat® C15
Tractor Engine
Flywheel Power - Tractor/Scraper469kW (637 hp) / 353 kW (479 hp)
Net Power469 kW/637 hp
Gross Power (SAE J1995)637hp
Net Power (ISO 14396)637hp
Bore5.7in
Stroke7.2in
Displacement1105in³
Net Power (SAE J1349/ISO 9249)584hp
Net Power (SAE J1349/ISO 9249)592hp
Scraper Engine
Net Power353 kW/447 hp
Gross Power (SAE J1995)481hp
Net Power (ISO 14396)480hp
Bore5.4in
Stroke6.75in
Displacement928in³
Net Power (SAE J1349/ISO 9249)415hp
Scraper Bowl
Scraper Capacity - Heaped44yd³
Rated Load104,000lb
Capacity - Struck32yd³
Depth of Cut - Maximum16.4in
Width - Cut - To Router Bits12.5ft
Ground Clearance - Maximum2.3ft
Depth of Spread - Maximum26in
Apron Opening92in
Apron Closure Force39200lb
Hyd. Penetration Force - 657G121000lb
General
Top Speed - Loaded33mile/h
Transmission
1 Forward3.5mile/h
2 Forward6.5mile/h
3 Forward7.8mile/h
4 Forward10.6mile/h
5 Forward14.2mile/h
6 Forward19.2mile/h
7 Forward25.7mile/h
8 Forward34.9mile/h
Reverse6.7mile/h
Top Speed - Loaded33mile/h
Hydraulics
Bowl Cylinder Bore7.08in
Bowl Cylinder Stroke37.4in
Apron Cylinder Bore7.08in
Apron Cylinder Stroke29.92in
Ejector Cylinder Stroke (Stage 1/ Stage 2)38.32in
Steering Circuit (@ High Idle)76.08gpm
Implement Circuit (@ High Idle)517L/min
Cushion Hitch Circuit19.54gpm
Secondary Steering Circuit14.52gal/hr
Relief Valve - Steering Circuit1959psi
Relief Valve - Implement Circuit1999psi
Compensator Settings - Cushion Hitch Circuit3002psi
Steering
Width - 180° Turn - Right45.4ft
Width - 180° Turn - Left47.57ft
Steering Angle - Right90
Steering Angle - Left85
Service Refill Capacities - Tractor
Crankcase13.7gal (US)
Transmission35.9gal (US)
Final Drive - Each6gal (US)
Cooling System23.4gal (US)
Hydraulic Reservoir39.6gal (US)
Windshield Washer0.5gal (US)
Differential36gal (US)
Service Refill Capacities - Scraper
Fuel Tank430gal (US)
Crankcase8.9gal (US)
Transmission31.9gal (US)
Final Drive - Each7.8gal (US)
Cooling System16.6gal (US)
Differential44gal (US)
Dimensions
Width - Overall Machine14.3ft
Width - Tractor12.3ft
Width - Rear Tire Center Lines9.21ft
Width - Inside of Bowl12.07ft
Width - Outside Bowl - Shipping Width12.84ft
Height - Overall Shipping15.29ft
Height - Top of Cab12.86ft
Ground Clearance - Tractor2.3ft
Front of Tractor to Front Axle14.93ft
Axle to Vertical Hitch Pin1.8ft
Height - Scraper Blade Maximum2.17ft
Wheel Base32.68ft
Length - Overall Machine58.96ft
Rear Axle - Rear of Machine8.07ft
Weights - Push-Pull
Total Shipping160505lb
Tractor Shipping93635lb
Scraper Shipping64068lb
Total Operating - Empty164,244.lb
Front Axle93842lb
Rear Axle66663lb
Total Operating - Loaded268,302.lb
Front Axle - Loaded134165lb
Rear Axle - Loaded130340lb
Standard Equipment

NOTE

  • Standard and optional equipment may vary. Consult your Cat dealer for details.

ELECTRICAL

  • Alarm, backup
  • Alternator, 115 amp - tractor engine
  • Alternator, 65 amp - scraper engine
  • Batteries Tractor (4), 12V Maintenance Free, High Output
  • Batteries Scraper (4), 12V Maintenance Free, High Output
  • Electrical System, 24V
  • Lighting System - Tractor
  • Lighting System - Scraper
  • Starting Receptacle - tractor and scraper engines

OPERATOR ENVIRONMENT

  • Air Conditioner (includes heater and defroster)
  • Automotive style fuse panel with fuse puller
  • Lunch box platform with holding strap
  • Coat Hook
  • Cup holder
  • Diagnostic Connection Port (12V)
  • Dome Courtesy Light
  • Engine speed lock
  • Fan defroster
  • Gauge Group
  • Horn
  • Implement Control Joystick
  • Rearview Mirrors
  • Radio Ready
  • 2 radio openings, speakers, and 5-amp converter
  • ROPS Cab with Sound Suppression and Pressurization
  • Static Seatbelt, 2 piece
  • Scraper Engine Controls
  • Seat, Air Suspension, Cat Advanced Ride Management
  • Steering Wheel - tilt and telescoping
  • Storage Compartment
  • Transmission Hold
  • Windows - sliding side
  • Windshield - laminated glass
  • Windshield Wiper/Washer - front and rear
  • Wrist Rest/Grab Handle

POWER TRAIN

  • Tractor
  • Scraper

OTHER STANDARD EQUIPMENT

  • Tractor
  • Scraper