Cat Water Solutions: 777 (07) Off-Highway Water Truck
THE RUNDOWN
ENHANCED SITE SAFETY
- Lower dust levels, increase visibility, maintain haul road safety — know where and when to water
- With automated water delivery, the operator can remain focused on traffic and driving
- When water tank is full, the auto shutoff feature prevents overfilling and results in increased component life
- Monitor tank fill from inside the cab
- The water delivery system features automatic start and stop, based on truck speed, which eliminates overwatering at road intersections to improve safety for all vehicles on site
- Traction Control System (TCS) and Wet Disc Braking is standard on all four corners of the truck
- Automatic Retarding Control (ARC) for downhill grades
COMFORTABLE CAB
- Ergonomic, intuitive controls, with left side power window and automatic temperature control
- Spacious cab with window area that supports visibility
- Cab is isolation mounted reducing noise and vibration — sound suppression has decreased noise by 50%
- Lighting packages illuminate both side and front of vehicle
- Factory-installed, integrated and durable ergonomic cab water controls are user-friendly and easy to learn
OPTIMIZED PRODUCTIVITY
- Properly watered haul roads directly impact fleet cycle times, enabling you to meet production targets.
- Spend less time maintaining haul roads using proper watering techniques to solve overwatering and underwatering
- Prevent damage to trucks and reduce unplanned downtime with properly watered haul roads
- Pump features soft startup and shuts off automatically when the tank is empty, eliminating damage and preventing the pump from running dry
- The 777 is faster and more efficient with a 7% increase in torque for more power to the ground, new transmission controls, and higher travel speeds.
EFFICIENCY & SUSTAINABILITY
- The Cat Water Delivery System (WDS) helps you manage water effectively and sustainability — helping you do more with less.
- WDS utilizes automatic start and stop to help eliminate overwatering at road intersections.
- WDS provides variable water flow based on truck speed, ensuring most efficient water placement.
- The water cannon operates while truck is idling, reducing fuel consumption by up to *50%.
*Results shown from Cat WDS cannon output. Testing was conducted at the Caterpillar Tucson Proving Ground with data captured from a production study. Results may vary.
DO MORE WITH LESS FUEL
- Auto Neutral Idle: as the 777 idles in a forward gear, the transmission will automatically slip in and out of a neutral state to avoid stalling the torque converter and raising engine rpm.
- Engine Idle Shutdown: when your truck is in park and idles for more than a preset time, the truck will initiate engine shutdown to conserve fuel. This feature can be time adjusted or turned on or off according to your specific needs.
- Speed Limiting: while you can continue to gear limit your trucks, Caterpillar offers speed limiting that allows the truck to travel at a more fuel efficient engine speed and gear selection.
- New APECS transmission controls increase fuel efficiency by maintaining momentum and speed on grade.
- The water cannon operates at idle, which reduces fuel consumption during cannon operation by up to *50%.
*Results shown from Cat WDS cannon output. Testing was conducted at the Caterpillar Tucson Proving Ground with data captured from a production study. Results may vary.
SCALABLE CONNECTIVITY
- Cat MineStar for water uses cloud-based connectivity through cellular and WiFi connection to collect and manage data at any job site.
- We offer two levels of connectivity (Basic & Premium*) to meet any customer need using Cat MineStar.
- Water Solutions data can help ensure customers are meeting regulatory requirements.
- View maps and dashboards of your operation to see how much your trucks are watering, where they are located, how much fuel they are using, and more.
INTEGRATION & SUPPORT
- Cat Water Solutions trucks are sold, serviced, and supported by the local Cat dealer you know and trust.
- Full support of Cat dealer and parts network.
- The truck is eligible for Equipment Protection Plans (EPP) & Customer Value Agreements (CVAs).
Engine
| Engine Model | Cat® C32B |
| Gross Power - SAE J1995:2014 | 1025hp |
| Engine Speed | 1800r/min |
| Net Power - SAE J1349:2011 | 916hp |
| Emissions | Fuel Optimized |
| Cylinders | 12 |
| Bore | 5.7in |
| Stroke | 6.4in |
| Displacement | 1959in³ |
| Emissions (1) | Available as U.S. EPA Tier 4 Final/EU Stage V equivalent, Tier 3/Stage IIIA equivalent, or Tier 2/Stage II equivalent emission standards. |
| Emissions (2) | Meets China Nonroad Stage III emission standards equivalent to Tier 3 or Tier 2. |
| Note (1) | Net Power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator with engine speed at 1,800 rpm. |
| Note (2) | Power rating applies at 1,800 rpm when tested under the specified condition for the specified standard. |
| Note (3) | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). |
| Note (4) | No engine derating required up to 2286 m (7,500 ft) for HRC and 4572 m (15,000 ft) for LRC machines. |
| Note (5) | Available as Tier 4 Final/Stage V equivalent or Tier 2/Stage II equivalent emission standards. |
Cat Water Delivery System (WDS)
| Maximum water flow | 1800gal(US)/min |
| Water per spray head (minimum) | 35gal(US)/min |
| Water per spray head (maximum) | 600gal(US)/min |
| Spray head opening range (minimum) | 0.04in |
| Spray head opening range (maximum) | 0.75in |
| Maximum size debris flushed through spray head | 0.75in |
| Spray system hydraulic tank capacity | 7.25gal (US) |
| Maximum number of rear spray heads | 5 |
| Minimum number of rear spray heads (recommended 3) | 2 |
| Minimum number of front/side spray heads | 2 |
| Maximum number of front/side spray heads | 0 |
| Maximum water from cannon (idle) | 600gal(US)/min |
| Maximum water from cannon (high idle) | 1650gal(US)/min |
| Maximum cannon spray distance | 200ft |
| Type | Wet water pump/hydraulic motor coupling |
| Note | Operator selectable coverage: 0.2 - 0.8 L/m² (4 kph - 40 kph) / 0.05 - 0.2 gal/ft² (3 mph - 25 mph). Coverage rates above 0.6 L/m² may not be available at higher speeds depending on head count and configuration. |
| Note (1) | Spray head opening is automatically controlled by the system to achieve Auto Mode Coverage or manual mode flow rate. |
| Note (2) | The Auto Mode setting controls water coverage and automatically adjusts to the number of spray heads being used — independent of ground speed. This is an exclusive feature designed into the Cat WDS software to help water more efficiently. Water flow is continually adjusted during operation to conserve water and achieve desired coverage and flow rate. |
| Note (3) | Alternatively, manual mode allows the operator to set a water flow rate that is constant regardless of ground speed. This mode is not recommended for daily operation and will reduce watering efficiency and may increase fuel usage. |
| Note (4) | Spray heads on competitive water distribution systems require tools and maintenance to change flow and spray pattern. Caterpillar is the only company to have variable active spray heads to regulate water spray. |
| Note (5) | Cannon performance depends on nozzle orifice and pipe size. |
Tank Configurations
| Water Tank Capacity | up to 75 700 L (20,000 gal) |
| Note | Multiple tank configurations are offered based on customer preference and regional locations. Water Tank Capacity Range: 75 400 - 75 700 L (19,900 - 20,000 gal) |
| Machine Weight (with water tank full) | 327,964 - 327,964 lb / 147 172 - 148 762 kg |
| Empty Machine Operating Weight (without water / with fuel) | 160,307 - 162,323 lb / 72 714 - 73 629 kg |
| Water Tank - Max Empty Weight (no WDS) | 42,983 - 44,092 lb / 19 497 - 20 000 kg |
| Note (1) | Water tanks are offered by local 3rd party providers with customization based on water application and regional customer requirements. Hoist cylinder mounting on all tank offerings enhances serviceability. |
| Note (2) | Number of spray heads can be customized based on customer needs and preferred watering techniques. Option for 3 - 5 spray heads mounted on the back of the water tank. Additional option for spray heads on each side of the water tank. |
| Note (3) | Water cannon arrangement typically mounts to the front of the water tank. |
Operating Specifications
| Top Speed - Loaded | 41.7mile/h |
| Note | Water Tank Capacity Range: 69 700 - 75 700 L (18,400 - 20,000 gal) |
| Note (2) | Operator selectable coverage: 0.2 - 0.8 L/m² (4 kph - 40 kph) / 0.5-0.2 gal/ft² (3 mph - 25 mph) |
Weights - Approximate
| Target Gross Machine Weight | 363000lb |
| Chassis Weight | 115217lb |
Transmission
| Forward - 1 | 6.8mile/h |
| Forward - 2 | 9.2mile/h |
| Forward - 3 | 12.5mile/h |
| Forward - 4 | 16.9mile/h |
| Forward - 5 | 22.9mile/h |
| Forward - 6 | 30.7mile/h |
| Forward - 7 | 41.7mile/h |
| Reverse | 7.5mile/h |
| Note | Maximum travel speeds with standard 27.00R49 (E4) tires. |
Final Drives
| Differential Ratio | 2.736:1 |
| Planetary Ratio | 7.0:1 |
| Total Reduction Ratio | 19.1576:1 |
Braking System
| Brake Surface - Front | 6331in² |
| Brake Surface - Rear | 15828in² |
| Brake Standards | ISO 3450:2011 |
Body Hoists
| Pump Flow - High Idle | 6331gpm |
| Relief Valve Setting - Raise | 2750psi |
| Relief Valve Setting - Lower | 500psi |
| Body Raise Time - High Idle | 15s |
| Body Lower Time - Float | 13s |
| Body Lower Time - High Idle | 13s |
Weight Distributions - Approximate
| Front Axle - Empty | 46% |
| Front Axle - Loaded | 33% |
| Rear Axle - Empty | 54% |
| Rear Axle - Loaded | 67% |
Suspension
| Empty Loaded Cylinder Stroke Front | 2.9in |
| Empty Loaded Cylinder Stroke Rear | 2.5in |
| Rear axle - Oscillation | 5.4° |
Steering
| Steering Standards | ISO 5010:2007 |
| Steer Angle | 30.5° |
| Turning Diameter - Front | 83ft |
| Turning Circle - Clearance Diameter | 93ft |
Tires
| Standard Tire | 27.00R49 (E4) |
| Note (1) | Productive capabilities of the 777 truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. |
| Note (2) | Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection. |
Service Refill Capacities
| Fuel Tank (1) | 300gal (US) |
| Fuel Tank (2) | 350gal (US) |
| Cooling System | 61gal (US) |
| Crankcase | 28.7gal (US) |
| Differentials | 59.9gal (US) |
| Final Drive - Each | 20gal (US) |
| Steering System - Including Tank | 14.1gal (US) |
| Brake Hoist System | 117gal (US) |
| Torque Converter - Transmission System | 36.5gal (US) |
Cab
| Air Conditioning | 18390Btu/lb |
| Heater / Defroster | 43930Btu |
| ROPS Standards (1) | Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. |
| FOPS Standards | Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. |
| Note (1) | The operator Equivalent Sound Pressure Level (Leq) is 73 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed. |
| Note (2) | The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid-gear moving operation is 83 dB(A). |
| Note (3) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. |
Standard Equipment
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
POWERTRAIN
- Air cleaner with precleaner (2)
- Air-To-Air Aftercooler (ATAAC)
- Automatic cold mode idle control
- Autostall
- Braking system: extended life brakes, brake wear indicator, Automatic Retarder Control (ARC) (utilizes oil-cooled, multiple disc brakes), brake release motor (towing), manual retarder (utilizes oil-cooled, multiple disc brakes), oil cooled and multiple disc (front/rear), parking, secondary, service
- Cat C32B Engine (Tier 4 Final / EU Stage V / Tier 2 / EU Stage II)
- Electric cold weather start (two starters and four batteries)
- Electric priming pump
- Engine idle shutdown
- Ether starting aid
- Exhaust, muffler
- Fan - variable speed (Tier 4)
- Fuel filter/water separator
- Muffler, exhaust (Tier 2)
- Transmission: 7-speed automatic powershift with Electronic Clutch Pressure Control (ECPC), torque shift management, part throttle shifting, body upshift inhibitor, directional shift management, downshift inhibitor, neutral start switch, neutral coast inhibitor, reverse shift inhibitor, reverse neutralizer during dumping, programmable top gear selection, Advanced Productivity Electronic Control Strategy (APECS software), auto neutral Idle
- Turbocharger (2)
SUSPENSION SYSTEMS
- Suspension, rear
ELECTRICAL
- Alarm, backup
- Alternator, 115 amperes
- Auxiliary jump start receptacle
- Batteries, maintenance-free, 12V (4), 200 amp-hour
- Electrical system, 25 amp, 24V to 12V converter
- Lighting system (LED): backup light, directionalsignals/hazard warning (front and rear), headlights,payload indicator lights, operator access courtesylights, side profile lights, stop/ tail lights, servicelights
OPERATOR ENVIRONMENT
- Air conditioning
- Ashtray and cigarette lighter
- Auto temp control
- Cat Comfort Series III– Full air suspension– Retractable 3-point seat belt with shoulder harness
- Coat hook
- Cup holders (4)
- Diagnostic connection port, 24V
- Electric left side window control
- Entertainment radio ready: 5 amp converter, speakers, antenna, wiring harness
- Fluid level monitoring
- Hoist lever
- Foot rest
- Gauges/indicators: brake oil temperature, coolant temperature, hour meter, tachometer, engine overspeed indicator, fuel level, speedometer with odometer, transmission gear indicator
- Heater/defroster (11 070 kCal/43,930 BTU)
- Integrated hoist and transmission control
- Horn, electric
- Light – courtesy
- Light – dome
- Load counter, automatic
- TPMS
- Mirrors, heated
- Power port, 12V (2)
- ROPS cab, insulated/sound suppressed
- Seat, Cat Next Gen Deluxe, retractable 4-point seat belt with shoulder harness and seat belt reminder
- Steering wheel, padded, tilt and telescopic
- Storage compartment
- Sun visor
- Throttle lock
- Tinted, laminated glass
- Truck Production Management System (TPMS)
- Trainer seat, lap belt, with seat belt reminder
- Touchscreen display, 7-inch
- Window, right side, hinged access/egress
- Windshield wiper (intermittent) and washer
GUARDS
- Engine crankcase
- Driveline
- Fan and A/C
FLUIDS
- Extended Life Coolant to –35° C (–30° F)
OTHER STANDARD EQUIPMENT
- Rock ejectors
- Traction Control System (TCS) (new version)
- Attachment Zone
CAT TECHNOLOGY PRODUCTS
- Object detection (4 cameras, 4 radars)
- TKPH/TMPH (Tons Kilometer Per Hour/ Tons Mile Per Hour)
- Cat MineStar™: Level 1 - Basic (Equipment Tracking)*
- *Basic connectivity package comes standard on all Cat Water Solutions trucks with a 6-month complimentary service-based offering
- Advanced health
- Adaptive economy mode
- Product Link™ Ready (Level 1)
- Cat Water Delivery System software
CAT WATER DELIVERY SYSTEM (WDS)
- Controls: Factory installed and integrated into cab
- Water System Monitor: integrated into cab, programmable spray configurations, automatic diagnostic messages
- Variable Hydraulic Pump Drive: 6814 L/min (1,800 gal/min) at speeds of 4 kph to 40 kph (3 to 25 mph) with auto shut-off and soft startup
- Stainless Steel Spray Heads: maintenance free, patented design resists corrosion
- Independent Hydraulic Cooling System: minimizes overheating
- Water Cannon: hydraulically controlled, integrated joystick with cab controls, optional nozzles
- Parts and service available through global Cat dealer network
OTHER EQUIPMENT
- Body down indicator
- Body mounting group
- Body safety pin (secures body in up position)
- Center-mounted rims
- Driveline guards
- Engine crankcase guards
- Fan and AC guards
- Fire suppression ready
- Fuel tank (1136 L/300 gal)
- Ground level battery disconnect
- Ground level engine shutdown
- Ground level grease fittings
- Reservoirs (separate): brake/hoist, steering, transmission/torque converter
- Rims 19.5 x 49
- Supplemental steering (automatic)
- Tie down eyes
- Tow hooks, front/tow pin, rear
- Vandalism protection locks
- Wiggins fast fuel
Optional Equipment
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
POWERTRAIN
- Cat engine compression brake
- Cold weather packages
- Fan - variable speed (Tier 2)
- Muffler, sound suppression (Tier 2)
OPTIONAL EQUIPMENT
OPERATOR ENVIRONMENT
- Mirrors, convex
- Visibility package (meets ISO 5006 requirements)
CAT TECHNOLOGY PRODUCTS
- Object detection (4 cameras)
- Road analysis control (RAC)
- Work Area Vision System (WAVS)
- Cat MineStar™: Level 1 - Basic (Equipment Tracking)*
- Cat MineStar™: Level 2 - Premium (Equipment Tracking + Production Recording)
- *Basic connectivity package comes standard on all Cat Water Solutions trucks with a 6-month complimentary service-based offering
OTHER EQUIPMENT
- Auto-lube grease fittings
- Cab precleaner
- Clustered grease fittings
- Cold weather packages
- Control, hoist
- Engine sound suppression (XQ) (Tier 4)
- Fire suppression arrangement
- Fluid fill service center
- Hoist cylinders
- Mud protection package
- Oil Renewal System
- Rear Axle Filtration (RAX)
- Spare rim
- Traction Control System (TCS) (new version)
- Visibility package (meets ISO 5006 requirements)
- Wheel chocks
CAT WATER DELIVERY SYSTEM (WDS)
- Optional WDS Camera System includes a camera to view spray bar on back of water tank and two cameras on top of tank for water fill positioning.
Water Tank Offerings with Options
- Tanks are offered by local 3rd party providers with customization based on water application and regional customer requirements. Tie offs, ladders, splash guards, fill chute, rock ejectors, cannon selection, and additional options are available. Cat dealer or local tank manufacturer installation. Contact your local Cat dealer or Caterpillar OEM Solutions for recommendations on local tank providers and available options.