D11 XE
THE RUNDOWN
Performance & Efficiency
- First-of-its-kind electric drive powertrain built on Caterpillar's deep electrification experience
- Up to 25% less fuel burned per unit of material moved compared to the D11
- Delivers optimized power to the ground, working more efficiently over a wider range of speeds and loads
- Single-plane cooling system enables better heat rejection
- Multiple blade options and three tilt cylinder options maximize productivity in a wide range of applications
- C32B engine delivers the performance you expect with heavier duty internals for improved reliability
- High horsepower reverse speeds up non-productive traveling for shorter cycle times
Operator Comfort
- Unparalleled operator environment designed to reduce effort and exposure
- Intuitive touchscreen display gives operators access to key machine information, giving real-time feedback to optimize productivity
- Suspended undercarriage absorbs impact and reduces shock loads by up to 50%
- Fully adjustable air suspension seat
- Ergonomic controls, including low-effort electronic steering, ripper and dozer controls keep operators in control and reduce fatigue
- Reduced noise and vibration, as well as improved airflow for maximum comfort
- 3 dB quieter than the D11 for both operator and spectators
Safety
- Improved operator visibility with clear lines of sight to front and rear work areas, as well as optional 360-degree vision system
- Third-generation powered ladder for safer access and egress
- Automatic engine shutoff if dozer is tipped or rolls over
- Seatbelt monitor and Operator Not Present monitoring system
- Ready for Cat MineStar Detect and Command
Technology & Innovation
- Autocarry™ provides automatic blade control during carry operations, reducing operator fatigue and increasing productivity up to 15%
- Grade Control 3D uses ROPS-mounted GNSS antennas and blade-mounted sensors to increase accuracy, enhance safety, and reduce the number of people required on site
- Automated Blade Assist increases efficiency with automated blade movements to preset pitch positions
- Automatic Ripper Control monitors and adjusts engine speed and ripper depth to minimize track slip and maximize productivity
Cat MineStar™ Solutions
- Terrain for grading provides onboard guidance tools and real-time feedback to help operators maximize efficiency and reduce rehandling of material
- Terrain with Blade Control speeds up dozing, decreases fuel burn and minimizes overcut, overfill and rehandling
- Command for dozing provides multiple levels of automation, from line-of-sight control of a single machine to semi-autonomous control over multiple dozers from a single remote station
Serviceability
- Modular design allows you to service major components without affecting surrounding areas
- Electric drive powertrain features 60% fewer parts and requires less frequent replacement of major components
- Lower high-idle engine speed reduces wear and tear for enhanced machine life
- Increased planned component repair time from 15,000 to 18,000 hours
- Automatic machine protection features keep the machine from damaging itself due to environmental factors or improper operation
Blades & Attachments
- Best-in-class attachments designed with decades of experience in research and development
- All blades are constructed of high-tensile-strength materials for high productivity over a long life
- 29.3° interior angle between the back bottom of the blade and the ground allows blades to better penetrate and load in tough conditions
- Superior loadability with heavy moldboard construction and bolt-on hardened cutting edges and end bits
Built to Go The Distance
- Frame, powertrain and major components are built to be rebuilt using new, remanufactured or rebuilt parts and components
- Longer rebuild intervals — achieves the same operating hours in an average 75,000-hour lifecycle with one fewer rebuild than the D11
- Robust variable piston pumps in the load-sensing hydraulic system run cooler for longer component and seal life
Mining For a Better World
- Electric drive powertrain reduces fuel consumption and greenhouse gas emissions with no impact on machine performance
- Built to be rebuilt, allowing you to achieve like-new performance at a far lower cost in energy, emissions and materials than using new components
- C32B engine meets U.S. EPA Tier 4 Final, EU Stage V and other equivalent emissions standards
- Maintenance-free diesel oxidation catalyst aftertreatment solution eliminates the need for DEF and reduces total fluid consumption
Engine - U.S. EPA Tier 4 Final/EU Stage V
| Engine Model | Cat® C32B |
| Engine Power - Net SAE J1349/ISO 9249 - Forward | 861hp |
| Displacement | 1959in³ |
| Engine Power - Net SAE J1349/ISO 9249 - Reverse | 956hp |
| Note (1) | *Excludes all fan losses. |
| Note (2) | Engine ratings apply at 1,600 rpm. |
| Note (3) | Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. |
Engine - U.S. EPA Tier 2 Equivalent
| Engine Model | Cat® C32B |
| Displacement | 1959in³ |
| Engine Power - Net SAE J1349/ISO 9249 - Forward | 861hp |
| Engine Power - Net SAE J1349/ISO 9249 - Reverse | 959hp |
| Note (1) | *Excludes all fan losses. |
| Note (2) | Engine ratings apply at 1,600 rpm. |
| Note (3) | Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. |
Fuel Tank Capacities
| Fuel Tank - Usable Volume | 466gal (US) |
Service Refill Capacities
| Cooling System | 50.7gal (US) |
| Engine Crankcase | 35.1gal (US) |
| Powertrain | 120gal (US) |
| Power Train - Refill Volume | 109.6gal (US) |
| Final Drive - Each | 10.6gal (US) |
| Roller Frames - Each | 24.8gal (US) |
| Hydraulic Tank | 42.2gal (US) |
| Hydraulic System Tank and Chassis | 64.7gal (US) |
| Hydraulic System Chassis + Blade and Ripper (Standard) | 117.6gal (US) |
| Hydraulic System Chassis + Blade and Ripper (Carrydozer) | 143.4gal (US) |
Weights
| Operating Weight | 238,794lb |
| Operating Weight - Carrydozer | 257,958lb |
| Note (1) | Operating weight includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. |
| Note (2) | CD Operating Weight includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. |
Hydraulic Controls
| Pump Type | Variable displacement piston pump |
| Combined Pump Output - Implement | 177gpm |
Undercarriage
| Width - Shoe | 28in |
| Width - Shoe - CD | 36in |
| Shoes/Side | 41 |
| Grouser Height | 4in |
| Pitch | 12.5in |
| Ground Clearance* | 30.6in |
| Track Gauge | 114in |
| Length - Track on Ground | 175in |
| Ground Contact Area | 9781in² |
| Ground Contact Area - CD | 12605in² |
| Track Rollers/Side | 8 |
| Number of Carrier Rollers | 1 per side (optional) |
Air Conditioning System
| Note (1) | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). See the label or instruction manual for identification of the gas. – If equipped with R-1234yf (Global Warming Potential = 0.501), the system contains 1.75 kg of refrigerant which has a CO2 equivalent of 0.001 metric tonnes (2.2 lbs). – If equipped with R-134a (Global Warming Potential = 1430), the system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons). |
Standards
| ROPS | Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 |
| FOPS | Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II |
| Sound (1) | The exterior sound pressure level for the standard machine (ISO 6396:2008) is 113 dB(A) (sound suppressed). |
| Sound (2) | The operator equivalent sound pressure level (ISO 6396:2008) is 76 dB(A) (sound suppressed). |
Transmission
| 1.0 Forward | 2.5mile/h |
| 2.0 Forward | 4.4mile/h |
| 3.0 Forward | 7mile/h |
| 1.0 Reverse | 3mile/h |
| 2.0 Reverse | 5.4mile/h |
| 3.0 Reverse | 7mile/h |
Blades
| Semi-Universal (SU)* Capacity | 35.6yd³ |
| Semi-Universal (SU)* Width Over Endbits | 219.8in |
| U-Blade Capacity | 45yd³ |
| U-Blade Width | 249.6in |
| Reclamation Universal - Blade capacity (SAE J1265) | 55yd³ |
| Reclamation Universal - Width with blade (over end bits) | 251.9in |
| Carry Dozer - Blade capacity (SAE J1265) | 57yd³ |
| Carry Dozer - Width with blade (over end bits) | 263.9in |
Ripper - Single Shank
| Maximum penetration force * (shank vertical) | 68,195lb |
| Maximum penetration depth (standard tip) | 63.5in |
| Pryout Force | 146991lb |
Ripper - Single Shank, Deep Ripping
| Maximum penetration force * (shank vertical) | 68,434lb |
| Maximum penetration depth (standard tip) | 85.5in |
| Pryout Force | 146376lb |
Ripper - Multi-Shank, Adjustable Parallelogram
| Overall Beam Width | 131.1in |
| Maximum Penetration Force - Shank Vertical | 69,112lb |
| Maximum Penetration - Standard Tip | 43.3in |
| Pry-Out Force - Multi-Shank Ripper with One Tooth | 144,785lb |
Dimensions
| Ground Clearance* | 31.4in |
| Track Gauge | 114in |
| Width - Over Trunnions | 172.4in |
| Height - FOPS Cab* | 173.4in |
| Height - Top of Stack* | 179.1in |
| Height - ROPS/Canopy* | 185.9in |
| Drawbar Height (Center of Clevis)* | 37.1in |
| Length - Track on Ground | 175in |
| Overall Length - Basic Tractor | 242.5in |
| Length - Basic Tractor - With Drawbar | 242.5in |
| Length - With SU-Blade** | 337.8in |
| Length - With U-Blade | 340.2in |
| Length - With Single-Shank Ripper | 319.2in |
| Length - With Multi-Shank Ripper | 331.8in |
| Width - Without Trunnions - Standard Shoe | 148.9in |
| Note (1) | *Includes grouser height for total dimensions on hard surfaces. |
| Note (2) | **CD Blade on D11/D11 XE CD |
Standard Equipment
OPERATOR ENVIRONMENT
- ROPS/FOPS, Sound-Suppressed Cab
- High-Definition Primary Touchscreen Display
- Visibility – Rearview Mirrors
- Air Conditioner and Heater with Automatic Climate Control
- Seat – Cloth with Air suspension
- Cab Glass – Single-Pane Tinted Safety
- Cab Access – Blade Push Arm Steps and Grab Handle
CAT TECHNOLOGY PRODUCTS
- VIMS
- Automated Blade Assist (ABA)
- Cat Product Link™ Elite (cellular)
CAT POWER TRAIN
- Cat C32B Engine – U.S. EPA Tier 4 Final/EU Stage V
- High-Performance Single-Plane Cooling Module
- Variable Speed Dual Path Electric Drive
- Tiller Steering – Electronic Control
UNDERCARRIAGE
- Suspension Type Undercarriage
- Sleeve Bearing Track
- Lifetime-Lubricated Rollers and Idlers
- Track Shoes (ES): 710/810/915 mm (28/32/36 in) Width (various configurations)
HYDRAULICS
- Electronically Controlled, Load-Sensing Dozer Lift and Tilt
- Electronically Controlled, Load-Sensing Ripper Lift and Pitch
- Dozer Blade – Dual Tilt
- Electronically Enabled Blade – Quick Drop
ELECTRICAL
- 24V Electric Start, Dual Starters
- Batteries – 4 × 4,200-Amp Hour, 12V
- Battery Isolation
- Lights – LED – 13 Positions
SERVICE AND MAINTENANCE
- Ecology Fluid Drains – All Compartments
- Hinged Bottom Guards
- High-Speed Oil Change – Engine and Transmission
- Ground-Level Fast Fuel Fill
- Ground-Level Electrical Service Station
- S·O·SSM Fluid Sampling Ports
- Diagnostic Connector
Optional Equipment
CAT POWER TRAIN
- Cat C32B Engine – Non-certified, equivalent to U.S. EPA Tier 2
- Hydraulic Cooling Fan – Automatic Reversing
OPERATOR ENVIRONMENT
- MineStar™ Terrain Display
- Visibility – Dual Camera
- Visibility – Four Cameras, 360 Degree View
- Visibility – Camera – Ripper Tip View
- Seat – Heated, Cooled, Adjustable Lumbar and Bolsters
- Cab Glass – Dual-Pane Laminated Impact Safety
- Cab Glass – High-Pressure Safety (40 psi/275 kPa)
- Cab Access – Powered Ladder
CAT TECHNOLOGY PRODUCTS
- AutoCarry™
- Auto Ripper Control
- Cat Terrain with 3D Blade Control
- Cat Terrain Ready
- Cat Product Link Elite Dual Mode (cellular + satellite)
- Cat Command for Dozing Ready
UNDERCARRIAGE
- Track Links – Heavy Duty XL – Duralink
- Track Shoe – Abrasion Resistant
- Track Shoe – Anti-Packing Round Hole
- Abrasion Rollers and Idlers
- Cold Weather Rollers and Idlers
- Carrier Roller
HYDRAULICS
- Carrydozer Hydraulics
- Dozer Extended Blade Pitch
- Ripper Pin Puller
ELECTRICAL
- Battery Isolation – Dual Pole
- Lights – LED Premium Package – 13 positions
SERVICE AND MAINTENANCE
- Sound Reduction Sealed Bottom Guards
- Ground-Level Fluid Fill and Drain
- Ripper Lubrication – Autolube with Ground-Level Fill
- Ripper Lubrication – Grouped
REAR ATTACHMENTS
- Ripper – Single Shank with Pin Puller
- Ripper - Single Shank – Push Block and Retrieval Hitch with Pin Puller
- Ripper - Single Shank – Push Block and Retrieval Hitch with Pin Puller – Heavy
- Ripper – Multi Shank (three shank)
- Ripper – Multi Shank – Heavy (three shank)
- Ripper – Multi Shank Leach Pad with Pin Puller
- Ripper – Multi Shank – Coal (five shank)
- Counterweight – Rear
- Drawbar with Counterweight
BLADES
- Semi-Universal (27.2 m³/35.6 yd³)
- Universal (34.4 m³/45.0 yd³)
- Carrydozer (43.6 m³/57 yd³)
- Reclamation Universal (42 m³/55 yd³)
- Coal Universal (75 m³/98.0 yd³)
- Coal Universal (65 m³/85.5 yd³)
OTHER
- Fire Suppression Ready
- Fire Suppression Installed