420 XE

420 XE Backhoe Loader

THE RUNDOWN

Ergonomic Operator Station
The 420 XE Backhoe Loader.
Adjustable Seat Mounted Controls improve ergonomics by increasing operator comfort and legroom. Operators have Loader and Backhoe Controls in the palm of their hands, whether they are facing the Loader, the Backhoe, or sitting off set for better visibility. The Spring Applied Hydraulically Released (SAHR) Parking Brake is controlled by simply pressing a button.
Load Sensing Hydraulics
The Cat Backhoe Loader’s load sensing piston pump provides full hydraulic lifting and digging forces at any engine speed. Variable flow pump matches hydraulic power to work demands.
Machine Performance
The Cat C3.6 engine delivers solid performance and meets U.S. EPA Tier 4 Final/EU Stage V emission standards by utilizing Selective Catalytic Reduction technology with a Diesel Oxidation Catalyst. The system allows the operator to disconnect the machine, even while the diesel exhaust fluid is being purged from the system.
Machine Versatility
The Integrated Tool Carrier (IT Coupler) for Single Tilt Loader Arm configurations are available from the factory or for simple field installation. The Cat Backhoe Loader with Integrated Tool Carrier (IT Coupler) will be the most versatile machine on the job site providing quick connection to a variety of Cat Attachments.
Cat Attachments
A large portfolio of Backhoe Loader Attachments, including but not limited to, Quick Couplers, Thumbs, assorted Buckets, and Brooms are available from the factory or for field installation. Cat Backhoe Loaders will be “Dirt Ready” upon delivery.
Powershift Transmission
A Four Speed Powershift Transmission is standard to make shifting gears smooth and as simple as twisting the Powershuttle Lever.
Lift Performance
The redesigned boom cylinder increases lift performance by 15%.
Sustainability
  • The Cat® C3.6 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
  • Save fuel and reduce your greenhouse gas emissions with efficiency features such as operator control modes (420 XE/440/450/432/444 models only) selectable through the display and with fuel management modes.
  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
  • Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working. Available on all models with pilot or E/H controls.
Engine
Maximum Gross Power – SAE J1995: 2014102 hp (76 kW) / 112 hp (84 kW)
Net Power - SAE J134992 HP (68 kW) / 103 HP (76 kW)
Engine ModelC3.6 74.5 kW (100 hp) Electronic Turbo Intercooled
EmissionsEngine meets Tier 4 Final/Stage V emission standards.
Ratings at 2,200 rpm - Gross Power SAE J1995102hp
Ratings at 2,200 rpm - Gross Power ISO 14396100hp
Net Power Rating at 2,200 rpm - SAE J134991hp
Net Power Rating at 2,200 rpm - ISO 924991hp
Net Peak Power Rating @ 1,800 rpm - SAE J1349105hp
Net Peak Power - 1,800 rpm - ISO 9249105hp
Dimensions - Bore3.86in
Dimensions - Stroke4.72in
Displacement220in³
Net Torque Rise - 1,400 rpm - SAE J134948%
Net Torque Rise - 1,400 rpm - SAE J1349322ft-lb
Power Rating Conditions - No De-Rating Required Up To10000ft
Engine - Optional
Engine ModelC3.6 82 kW (110hp) Electronic Turbo Intercooled
EmissionsEngine meets Tier 4 Final/Stage V emission standards.
Ratings at 2,200 rpm - Gross Power SAE J1995112hp
Ratings at 2,200 rpm - Gross Power ISO 14396110hp
Net Power Rating at 2,200 rpm - SAE J1349101hp
Net Power Rating at 2,200 rpm - ISO 9249101hp
Dimensions - Bore3.86in
Dimensions - Stroke4.72in
Displacement220in³
Net Torque Rise - 1,400 rpm48%
Net Torque Rise - 1,400 rpm - SAE J1349358ft-lb
Weights
Operating Weight - Maximum24251lb
Operating Weight (estimated)16279lb
Cab - ROPS/FOPS320lb
Operating Weight - Maximum - ROPS Capacity24251lb
Power-Shift TransmissionSTD
Ride Control33lb
Air Conditioning99lb
All-Wheel DriveSTD
MP Bucket (0.96 m3/1.25 yd3) - With Fold-Over Forks2017lb
MP Bucket (0.96 m3/1.25 yd3) - Without Fold-Over Forks1642lb
Loader QC540lb
Extendible Stick (excludes ft. counterweight)595lb
Counterweights, base256lb
Counterweights, base - Stackable, one529lb
Counterweights, base - Maximum1014lb
NoteMachine configuration: standard stick hoe, OROPS canopy, AWD power shift transmission, 0.96 m³ (1.25 yd³) GP (General Purpose) loader bucket, 610 mm (24 in) standard duty hoe bucket, front 340/80-18 and rear 500/70-24 tires, 240 kg (530 lb) counterweight, 80 kg (176 lb) operator, full fuel tank.
Backhoe
Dig Depth - Standard14ft
Transmission
Power Shift Transmission - Standard - Forward - 1st3.7mile/h
Power Shift Transmission - Standard - Forward - 2nd5.8mile/h
Power Shift Transmission - Standard - Forward - 3rd12mile/h
Power Shift Transmission - Standard - Forward - 4th25mile/h
Power Shift Transmission - Standard - Reverse - 1st3.7mile/h
Power Shift Transmission - Standard - Reverse - 2nd7.7mile/h
Power Shift Transmission - Standard - Reverse - 3rd17mile/h
Power-Shift Transmission - Optional - Forward -1st3.7mile/h
Power-Shift Transmission - Optional - Forward - 2nd5.8mile/h
Power-Shift Transmission - Optional - Forward - 3rd8mile/h
Power-Shift Transmission - Optional - Forward - 4th12mile/h
Power-Shift Transmission - Optional - Forward - 5th17mile/h
Power-Shift Transmission - Optional - Forward - 6th25mile/h
Power-Shift Transmission - Optional - Reverse - 1st3.7mile/h
Power-Shift Transmission - Optional - Reverse - 2nd7.7mile/h
Power-Shift Transmission - Optional - Reverse - 3rd17mile/h
Power-Shift Transmission with LTC - Optional - Forward - 1st3.7mile/h
Power-Shift Transmission with LTC - Optional - Forward - 2nd5.8mile/h
Power-Shift Transmission with LTC - Optional - Forward - 3rd8mile/h
Power-Shift Transmission with LTC - Optional - Forward - 4th12mile/h
Power-Shift Transmission with LTC - Optional - Forward - 5th17mile/h
Power-Shift Transmission with LTC - Optional - Forward - 5th LTC18mile/h
Power-Shift Transmission with LTC - Optional - Forward - 6th25mile/h
Power-Shift Transmission with LTC - Optional - Forward - 6th LTC*25mile/h
Power-Shift Transmission with LTC - Optional - Reverse - 1st3.7mile/h
Power-Shift Transmission with LTC - Optional - Reverse - 2nd7.7mile/h
Power-Shift Transmission with LTC - Optional - Reverse - 3rd17mile/h
Note (1)Travel speeds of two wheel drive backhoe loader at full throttle, when equipped with 500/70-24 rear tires.
Note (2)*Limited by engine speed to 40 km/h (25 mph).
Axle Ratings
Front Axle, AWD - Static26455lb
Front Axle, AWD - Dynamic20233lb
Rear Axle - Static28660lb
Rear Axle - Dynamic15432lb
Hydraulic System
TypeClosed Center
Pump TypeVariable-flow, Axial Piston
Pump Capacity at 2,200 rpm49.4gpm
System Pressure - Backhoe3626psi
System Pressure - Loader3626psi
Steering
TypeFront Wheel Steering
Power SteeringHydrostatic
CylinderOne Double-Acting
Bore2.6in
Stroke4.2in
Rod Diameter1.6in
Axle Oscillation11°
Turning Circle - (inner wheel not braked) - Outside Front Wheels26.92ft
Turning Circle - (inner wheel not braked) - Outside Widest Loader Bucket35.25ft
Service Refill Capacities
Cooling System with Air Conditioning4.8gal (US)
Fuel Tank42.3gal (US)
Engine Oil - With Filter2.4gal (US)
Diesel Exhaust Fluid (DEF)5gal (US)
Transmission - Power Shuttle - AWD4.8gal (US)
Transmission - Power Shift - AWD5gal (US)
Rear Axle4.2gal (US)
Rear Axle - Planetaries0.4gal (US)
Front Axle (AWD)2.9gal (US)
Front Axle (AWD) - Planetaries0.2gal (US)
Hydraulic System25.1gal (US)
Hydraulic Tank11.1gal (US)
Standard Equipment

STANDARD EQUIPMENT

  • Adjustable auxiliary controls, backhoe loader
  • Air cleaner
  • Alarm, back-up
  • Audible system fault alarm
  • Automatic Engine Speed Control (AESC)
  • Battery, maintenance-free, 850 CCA
  • Battery disconnect switch
  • Boom transport lock
  • Brace, lift cylinder
  • Brake, parking, Spring Applied Hydraulically Released (SAHR)
  • Brakes, hydraulically boosted, oil disc, dual pedals, interlocking
  • Bucket level indicator
  • Canopy, ROPS/FOPS
  • Cat cushion swing system
  • Coat restraint
  • Coolant/antifreeze, extended life
  • Dome light (cab only)
  • Diagnostic port for engine, machine and gauge cluster Electronic Control Modules
  • Differential lock, loader joystick
  • Drink holders, two
  • Engine, Cat C3.6 (Direct Injection Turbocharged), meets Tier 4 Final/Stage V emission standards, Selective Catalytic Reduction, Diesel Oxidation Catalyst (DOC)
  • Engine enclosure, sound suppression, removable side panels
  • Face seals, O-ring
  • Fan, suction and guard
  • Fast reversing shuttle, all gears
  • Fenders, rear
  • Filters, spin-on: fuel, engine oil, transmission oil, water separator
  • Filters, bowl and cartridge: hydraulic fluid
  • Flashing hazards/signal lights
  • Floor mat
  • Four wheel drive
  • Four wheel drive shaft guard
  • Fuel tank, fully enclosed
  • Fully hinged front grill for cooling package cleaning access
  • Gauge cluster: coolant temperature, fuel level, torque converter temperature, DEF level
  • Ground level fuel fill and DEF fill
  • Halogen lights, working (4 front, 4 rear)
  • High ambient cooling package
  • Hood lock, inside cab
  • Hydraulic Lock Out, loader, backhoe, auxiliary hydraulics
  • Hydraulic hose, XT™
  • Hydraulic oil cooler
  • Hydraulic oil level sight gauge
  • Hydraulic valves, loader 2 function
  • Hydraulic valves, backhoe 5 function
  • Hydraulics, load sensing with variable displacement piston pump
  • Indicator lights: wait to start, water in fuel, engine warning, warning lamp, emissions module malfunction, low battery/charging system warning, high hydraulic oil temperature: LCD warnings: engine oil pressure, machine locked, service due, air filter blocked, high coolant temperature, auto idle shutdown, high torque converter temperature, hydraulic filter bypass
  • Instrument panel lights
  • Key start/stop system
  • LCD operator display with soft key controls: engine speed, hour meter, gear/direction, battery voltage, hydraulic oil temperature, torque converter temperature, coolant temperature, trip totals (fuel and hours), lifetime totals (fuel and hours), operator settings (units, brightness, programmable hoe auxiliary flow), service mode diagnostics, maintenance intervals, ECM/system info
  • Loader, EH Parallel Lift
  • Loader, Programmable Kick Out
  • Loader, Programmable Return To Dig
  • Loader, single tilt
  • Mirror, interior, rearview
  • One-touch low idle
  • Open circuit breather
  • Pattern changer, in cab
  • Power receptacle, 12 volt, 2 internal, 1 external
  • Power receptacle, 5 volt USB, 1 internal
  • Power steering, hydrostatic
  • Product Link™, satellite, network manager
  • Product Link, cellular, network manager
  • Seat belt, retractable, 51 mm (2 in)
  • Seat mounted joystick controls: backhoe and loader, EH operated, excavator style with pattern changer
  • Socket, two roof
  • Stabilizers, EH Control, Auto-UP
  • Stabilizer shoes, street
  • Steering knob
  • Seat, air suspension, vinyl cover, with armrest
  • Starting system, glow plugs
  • Steering column, tilting, telescopic
  • Storage compartment, lockable
  • Storage tray
  • Stop and tail lights
  • Swing transport lock
  • Tires
  • Toolbox, external, lockable
  • Torque converter
  • Throttle, hand and foot, electronic
  • Transmission, 4 speed, powershift
  • Transmission neutralizer switch
  • Transport tie-downs
  • Vandalism locks, four
  • Warning horn, electric
Optional Equipment

OPTIONAL EQUIPMENT

  • Auxiliary hydraulics, loader, adjustable flow
  • Auxiliary hydraulics, rear, adjustable flow
  • Battery, additional, 850 CCA
  • Cab, deluxe
  • Cold weather fuel (–30° C/–22° F)
  • Cold weather package, including additional battery, engine block heater, radiator antifreeze, cold weather fuel (–30° C/–22° F) and mounting for an ether bottle
  • Counterweights, 115 kg (255 lb), 240 kg (530 lb) or 460 kg (1,015 lb)
  • Fenders, front with integral steps
  • Guard, boom protection plate
  • Guard, stabilizer, rock
  • Hydraulic valves, loader with auxiliary roller thumb control (3rd valve for MP or Quick Coupler)
  • Hydraulic valves, backhoe (with 6th function)
  • Hydraulic lines, combined function auxiliary
  • LED lights, working (4 front, 4 rear)
  • Quick Coupler, hydraulic, dual lock
  • Quick Coupler, manual, dual lock
  • Quick Coupler, manual, pin lock
  • Radio and CD player, Bluetooth®
  • Ride Control
  • Rotating beacon, magnetic mount
  • Seat, air suspension, fabric with armrest
  • Seat, air suspension, fabric with armrest, heated
  • Seat belt, retractable, 75 mm (3 in)
  • Security system, Bluetooth
  • Security system, operator display
  • Side mirrors, cab, external
  • Single Tilt Loader Coupler, Integrated Tool Carrier (IT) Interface
  • Stabilizer pads, reversible
  • Stick, extendible
  • Touch screen LCD Display: engine speed, hour meter, gear/direction, battery voltage, hydraulic oil temperature, torque converter temperature, coolant temperature, trip totals (fuel and hours), lifetime totals (fuel and hours), operator settings (units, brightness, programmable hoe auxiliary flow), service mode diagnostics, maintenance intervals, ECM/system info
  • Transmission, AutoShift with lock-up torque converter, 6 speed
  • Vandalism protection, gauge cover
  • Work Tool Attachments such as buckets, forks, material handling arms, augers, hammers, brooms, cold planers and vibratory plate compactors. See your Cat dealer for more information.

3.66 m (12 ft) Bucket Receiver Straight Snow Push With Steel Trip Edge

3.66 m (12 ft) Bucket Receiver Straight Snow Push With Steel Trip Edge
Working Width144 in
Weight2184.8 lb
Length69.1 in

3.05 m (10 ft) IT Coupler Straight Snow Push With Steel Trip Edge

3.05 m (10 ft) IT Coupler Straight Snow Push With Steel Trip Edge
Working Width120 in
Weight1803.4 lb
Length50.4 in

3.66 m (12 ft) IT Coupler Straight Snow Push With Steel Trip Edge

3.66 m (12 ft) IT Coupler Straight Snow Push With Steel Trip Edge
Working Width144 in
Weight1995.2 lb
Length50.4 in