G3520 with FAST RESPONSE

G3520 2000kW Gas Generator Set

THE RUNDOWN

Cat G3520 Gas Engine
  • Robust high speed block design provides prolonged life and lower owning operationg costs
  • Designed for maximum performance on low pressure pipeline natural gas and hydrogen blends
  • Simple open chamber combustion system for reliability and fuel flexibility
  • Leading edge technology in ignition system and air/fuel ratio control for lower emission and engine efficiency
  • One electronic control module handles all engine functions: ignition, governing, air/fuel ratio control and engine protection
SR5 Generator
  • Designed to match performance and output characteristics of Caterpillar gas engines
  • Industry leading mechanical and electrical design
  • High efficiency
Cat ECS 100 Control Panel
3
  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirement
  • Expansion modules and site-specific programming for specific customer requirements
Cooling System
  • Designed to operate in standard ambient temperatures up to 43°C (110°F)
  • Contact your Cat Dealer for specific ambient and altitude capabilities
Emissions
  • EPA Certified for use in Emergency and Non-Emergency applications
  • Additional a NOx selectable genset is available to meets most worldwide emissions requirements down to 0.5 g/bhp-hr NOx level without aftertreatment
Proven System
  • Field proven in a wide range of applications worldwide
  • Fully prototype tested
  • Certified torsional vibration analysis available
Full Range of Attachments
  • Wide range of bolt-on system expansion attachments
  • Factory designed and tested
  • Flexible packaging options for easy and cost effective installation
Worldwide Product Support
  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Generator Set Specifications
Gas Standby Rating2000 ekW @ 0.8pf
Fuel TypeNatural Gas, Hydrogen Blend (up to 5%)
Emissions/Fuel StrategyU.S. EPA Stationary Non-Emergency Certified
Frequency60 Hz
RPM1800 rpm
Compression Ratio11.5
Engine Specifications
Engine ModelG3520
Displacement5956in³
AspirationTA
Bore6.7in
Stroke8.5in
Generator Set Dimensions
Length336in
Width94in
Height128in
Weight48500lb
Standard Equipment

Air Inlet

  • Two-element single-stage air cleaner with enclosure and service indicator

Control Panel

  • Cat ECS 100

Cooling

  • Jacket water and SCAC engine-driven pumps
  • Jacket water and SCAC thermostats

Exhaust

  • Dry exhaust manifolds, insulated and shielded
  • Cat-flanged face outlet on turbocharger
  • Individual exhaust port and turbocharger outlet wired to integrated temperature sensing module (ITSM) with GCEM providing alarms and shutdowns

Fuel System

  • Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
  • Engine-installed electronic control valve
  • Gas pressure regulator
  • Throttle plate, 24V DC actuator, controlled by GECM
  • 24V DC energized-to-run (ETR) gas shutoff valve

General

  • Parts book
  • Paint- Caterpillar Yellow with high gloss black rails and radiator
  • Operation and maintenance manuals
  • Crankshaft vibration damper and guard
  • RH Service

Generator

  • Permanent Magnet Excitiation
  • Integrated voltage regulator (IVR)
  • SR5
  • Winding temperature detectors
  • Anti-condensation space heater
  • NEMA Class H insulation

Starting/Charging

  • 24V starting motors
  • Battery with cables and rack (shipped loose)
  • Jacket water heater
  • Electric Starter

Governing System

  • ADEM A4

Ignition System

  • Electronic Ignition System (controlled by ADEM A4)
  • Individual Cylinder Detonation Sensitive Timing (DST)
Optional Equipment

Air Inlet

  • Air cleaner with precleaner

Control Panel

  • EMCP 4.4
  • Local alarm module
  • Engine failure relay
  • Remote annunciator
  • Remote PC monitoring
  • Local PC monitoring

Circuit Breakers

  • 1600A, 2000A 3 Pole, UL-100% Rated R-Frame Circuit Breakers
  • 100% rated, 3-pole (UL/CSA/IEC) 5th Digit Rating
  • S LSI, G LSIG, P LSIG-P, 4th Digit Type
  • Frame mounting
  • 3-pole (IEC 947-2 rated)
  • 2000A, 2500A, 3000A 3 Pole, UL-100% Rated Masterpact Circuit Breakers

Cooling

  • Package mounted radiator
  • Coolant level drain line with valves, fan with guard

Exhaust

  • 18, 25 dBA Attenuation
  • 305mm (12 in) spark arresting muffler
  • 305 mm (12in.) elbow
  • 305 mm (12 in.) flange
  • 305 mm (12 in.) muffler

Fuel System

  • 3, 0-100 kPag, 4-20mA gas train pressure sensors

General

  • Digital diagnostic tool

Generator

  • Bearing temperature detectors
  • Generator air filter
  • Cable access box
  • European bus bars
  • Low voltage extension box

Starting/Charging

  • 20A, 24VDC battery charger
  • 45A, 24V charging alternator (requires engine driven pumps)

Grid Code Compliance

  • 60 Hz: USA