Caterpillar TL642D Telehandler
THE RUNDOWN
Engine
| Engine Model | Cat® C3.4B |
| Gross Power - Basic | 100hp |
| Note | Meets U.S. EPA Tier 4 Final emission standards. |
Weights
| Operating Weight | 22002lb |
Operating Specifications
| Rated Load Capacity | 6500lb |
| Maximum Lift Height | 42ft |
| Maximum Forward Reach | 30ft |
| Top Travel Speed | 21mile/h |
| Capacity at Maximum Reach | 700lb |
| Frame Leveling | 10° |
| Drawbar Pull - Loaded | 19783lbf |
| Capacity at Maximum Height | 6500lb |
| Turning Radius - Over Tires | 12ft |
Tires
| Standard | 370/75-28 Air Duraforce |
| Optional (1) | 370/75-28 Foam Duraforce |
| Optional (2) | 13.00 × 24-16 PR Air |
| Optional (3) | 13.00 × 24-12 PR Foam Filled |
| Optional (4) | 13.00 × 24 Solid |
Hydraulic System
| Gear Pump | Single-section |
| Note | Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. |
| System Operating Pressure | 3770psi |
| Auxiliary Hydraulic Pressure | 3481psi |
| Auxiliary Hydraulic Flow | 18gpm |
Service Refill Capacities
| Fuel Tank | 38.3gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | 5.7gal (US) |
| Hydraulic System | 40gal (US) |
Boom Performance
| Boom Up | 15s |
| Boom Down | 10.3s |
| Tele In | 9.5s |
| Tele Out | 16.3s |
Braking System
| Parking Brakes | Wet disc, spring applied hydraulic release on front axle |
| Service Brakes | Inboard wet disc brakes on front and rear axles |
Axles
| Type (1) | Trunnion mounted planetary 55 degree steer axles. |
| Type (2) | High bias limited slip differential on front axle. |
Work Tools
| Hydraulic IT Coupler | Includes Auxiliary Electrics |
| Carriages - Swing | 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) |
| Pallet Forks - Option 2 | [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) |
| Carriages - Standard Tilt | 50in |
| Carriages - Dual Fork Positioning | 50in |
| Carriages - Standard Rotate | 50in |
| Cubing Forks | [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) |
| Carriages - Side Shift | 48in |
| Carriages - Wide Rotate | 72in |
| Lumber Forks - Option 1 | [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) |
| Carriages - Wide Tilt | 72in |
| Lumber Forks - Option 2 | [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in) |
| Pallet Forks - Option 1 | [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) |
| Pallet Forks - Option 3 | [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in) |
Transmission Speeds
| Forward | 4 speed |
| Reverse | 3 speed |