Caterpillar TH255C Telehandler
THE RUNDOWN
Engine
| Engine Model | TD 2.9L L4* |
| Gross Power | 74.0hp |
| Displacement | 177.0in³ |
| Maximum Torque - 1,800 rpm | 192.0lb/ft |
| Note | *Meets EEC Stage IIIA and EPA Tier 3 Emission Standards. |
Weights
| Operating Weight - With Carriage and Forks | 11045.0lb |
Operating Specifications
| Rated Load Capacity | 5512.0lb |
| Maximum Lift Height | 18.37ft |
| Maximum Forward Reach | 10.83ft |
| Top Travel Speed - 12 × 16.5 Tires | 15.0mile/h |
| Capacity at Maximum Height | 2998.0lb |
| Turning Radius - Over Tires - 14 × 17.5 Tires | 122.0in |
| Top Travel Speed - 14 × 17.5 Tires | 17.0mile/h |
| Turning Radius - Over Tires - 12 × 16.5 Tires | 126.0in |
| Capacity at Maximum Reach | 1720.0lb |
Tires
| Standard | 12.00 × 16.5 |
| Optional | 14.00 × 17.5; 10.5 × 18.0 |
Service Refill Capacities
| Fuel Tank | 24.0gal (US) |
| Hydraulic System | 24.0gal (US) |
Boom Performance
| Boom Up | 6.6s |
| Boom Down | 8.2s |
| Tele In | 3.5s |
| Tele Out | 6.7s |
| Bucket Crowd | 1.8s |
| Drawbar Pull - Loaded | 8902.0lb |
| Bucket Dump | 2.3s |
Braking System
| Parking Brakes | Wet disc spring-applied hydraulic release |
| Service Brakes | Inboard wet disc brakes on front axle |
Axles
| Types (1) | High bias limited slip differential on front axle. |
| Types (2) | Planetary on front and rear axles. |
Transmission
| Reverse | Variable Speed |
| Forward | Variable Speed |
| Transmission | Hydrostatic |
Instruments
| Types (3) | Indicators for battery charge, coolant temperature, parking brake and engine pre-heat. |
| Types (4) | Panel and switches are illuminated for night operation. |
| Types (5) | Reverse motion alarm. |
| Types (2) | Light on dash indicates when brake is on. |
| Types (1) | Indicators for machine hours, fuel-level, steer mode and steering pressure. |
Hydraulic System - Implement
| Maximum System Pressure | 3495.0psi |
| Maximum Pump Flow | 19.1gpm |
| Pump Type | Gear pump |
| Auxiliary Hydraulic Circuit | Used for all attachments equipped with cylinders or other hydraulic components. Consists of valves, controls & hydraulic lines. |