Caterpillar 335F L Hydraulic Excavator
THE RUNDOWN
Performance
- The Cat C7.1 engine with ACERT™ Technology is designed to meet U.S. EPA Tier 4 Final/EU Stage IV emission standards while burning up to 16% less fuel than the model it replaces.
- The hydraulic system supports lifting up to 10 886 kg (24,000 lb) over the side at ground level without limitation – approximately 5% more than the model it replaces.
- Standard high-ambient cooling enables the machine to work with maximum power in hot conditions up to 52° C (126° F).
- Long, heavy-duty undercarriage provides greater stability when lifting heavy objects, leading to greater overall productivity.
Versatility
- Utility and finishing work are fast and flawless with a Cat tilt bucket and compactor.
- Demolition work is quick and easy with a Cat hammer, thumb, shear, or multi-processor.
- A coupler lets you swap between attachments in seconds without leaving the cab.
- See the whole attachment line for your machine at www.cat.com/attachments.
Maintenance
- Most routine maintenance items like grease points and fluid taps are reachable at ground level.
- Compartments are designed for safe, convenient access to filters, hoses, and other components.
- Service doors help keep debris out and latch in place to enhance service speed.
Comfort
- The full-size roll-over protective structure (ROPS) certified cab is quiet and comfortable.
- Automatic climate control helps maintain consistent cab temperature.
- Joystick consoles and armrests are adjustable.
- Seats are adjustable and feature air suspension and heated and cooled options.
- The LCD monitor is easy to navigate and programmable in 44 languages.
Durability
- The large swing bearing is secured with elongated bolts to help handle the most swing-intensive work.
- Abrasion-resistant Cat XT™-6 hose can stand up to high pressures over the long haul.
- Booms and sticks are built for long service.
- Box-section structures with multi-plate fabrications, castings, and forgings are used in high-stress areas.
- Greased track link between pins and bushings increases undercarriage life and reduces noise.
- Cat Connect technology solutions increase production, minimize operating costs, and optimize return on investment.
- VisionLink® provides wireless access to machine operating data such as location, hours, idle time, fuel usage, productivity, and diagnostic codes to optimize performance.
Engine
| Engine Model | Cat® C7.1 ACERT™ |
| Net Flywheel Power | 200hp |
| Bore | 4.13in |
| Stroke | 5.31in |
| Displacement | 428in³ |
| Net Power - SAE J1349:2011 | 200hp |
| Gross Power - SAE J1995:2014 | 204hp |
| Engine RPM - Travel | 1800r/min |
| Engine RPM - Operation | 1800r/min |
Weights
| Operating Weight | 84170lb |
Machine Weight
| Minimum Operating Weight* | 75680lb |
| Note (2) | **850 mm (33 in) shoes, blade, reach boom, R3.75 m (12'4") stick, CB2 bucket linkage, CB1350HD 1.54 m3 (2.01 yd3) bucket. |
| Note (1) | *600 mm (24 in) shoes, reach boom, R2.65CB2 (8'8") stick, CB2 bucket linkage, and CB1500GD 1.76 m3 (2.30 yd3) bucket. |
| Maximum Operating Weight** | 84170lb |
Service Refill Capacities
| Fuel Tank Capacity | 101.7gal (US) |
| Cooling System | 7.9gal (US) |
| Engine Oil | 6.3gal (US) |
| Final Drive - Each | 2.1gal (US) |
| Hydraulic System - Including Tank | 76.6gal (US) |
| Hydraulic Tank | 40.7gal (US) |
| Swing Drive - Each | 2.4gal (US) |
| DEF Tank | 6.1gal (US) |
Dimensions
| Boom | Reach Boom 6.15 m |
Swing
| Swing Torque | 60628ft·lbf |
| Swing Speed | 9.9r/min |
Drive
| Maximum Drawbar Pull | 66319lbf |
| Maximum Travel Speed | 4.2/2.6 km/h (2.6/1.6 mph) |
Hydraulic System
| Maximum Pressure - Equipment - Normal | 5076psi |
| Maximum Pressure - Equipment - Heavy Lift | 5366psi |
| Main System - Maximum Flow - Total | 130gpm |
| Maximum Pressure - Travel | 5366psi |
| Pilot System - Maximum Flow | 7.9gpm |
| Pilot System - Maximum Pressure | 595psi |
| Maximum Pressure - Swing | 3974psi |
Sound Performance
| ISO 6396 - Operator Noise (Closed) | 72dB(A) |
| ISO 6395 - Spectator Noise | 104dB(A) |
Working Ranges - Reach Boom - 6.15 m (20'2)
| Minimum Loading Height | 9.58ft |
| Maximum Vertical Wall Digging Depth | 18.92ft |
| Maximum Digging Depth | 22.92ft |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 22.42ft |
| Maximum Cutting Height | 36.58ft |
| Maximum Loading Height | 26.17ft |
| Maximum Reach - Ground Level | 34.92ft |
Dimensions - Reach Boom - 6.15 m (20'2)
| Track Gauge | 8.50ft |
| Note (3) | ***With 1.54 m3 (2.01 yd3) bucket |
| Shipping Height* | 11.58ft |
| Cab Height* | 10.67ft |
| Note (2) | **Without shoe lug height |
| Track Length | 16.50ft |
| Tail Swing Radius | 6.25ft |
| Transport Width - 850 mm (33 in) Shoes | 11.25ft |
| Shipping Length | 32.25ft |
| Note (1) | *Including shoe lug height |
| Ground Clearance** | 1.58ft |
| Counterweight Clearance** | 3.92ft |
| Length - Center of Rollers | 13.25ft |
| Transport Width - 600 mm (24 in) Shoes | 10.50ft |