C32 ACERT Tier 2 Oilfield Diesel Generator Set
THE RUNDOWN
Product Support Offered Through the Global Cat Dealer Network
- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your Cat petroleum product - Worldwide parts availability, service, and warranty - Preventive maintenance agreements available for repairbefore- failure opti
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
Web Site
For all your petroleum power requirements, visit www.cat.com/oilandgas.
Engine Specifications
| Maximum Rating | 800 ekW (1000 kVA) |
| Minimum Rating | 910 ekW (1300 kVA) |
| Emissions/Fuel Strategy | U.S. EPA Tier 2 |
| Aspiration | Turbocharged-Aftercooled |
| Manifold Type | Dry |
| Bore | 5.7in |
| Stroke | 6.4in |
| Displacement | 1959.0in³ |
| Engine Control and Protection | ADEM A4 |
| Generator Set Control | EMCP 3.1 |
| Generator | SR4B |
| Fuel System | MEUI |
| Frequency - Speed | 50/60 Hz (1500/1800 rpm) |
Capacity for Liquids
| Fuel | Diesel |
Dimensions
| Length | 206.0in |
| Width | 75.0in |
| Height | 86.0in |
| Weight | 20500.0lb |
Standard Equipment
Air Inlet System
- Dual element air cleaner
- Service indicator
Cooling System
- Radiator package mounted (50° C)
- Coolant drain line with valve at edge of base
- Coolant level sensor
- Fan and belt guards
- Coolant level sight gauge
- Cat Extended Life Coolant
- Metal top and bottom tanks
Exhaust System
- Dry exhaust manifold
- Flange outlets
Fuel System
- Primary fuel filter with integral water separator
- Secondary fuel filters
- Fuel priming pump
- Flex fuel lines
- Fuel cooler
Generator
- SR4B brushless
- Self excited
- Class H insulation
- Form wound
- IP23 protection
- Cat DVR 3-phase sensing with selectable volts/Hz
- 3 sensing CTs and one droop CT
- Anti-condensation space heater
Generator Attachments
- Bus bar - NEMA and IEC mechanicallug holes
- Bottom cable entry; capable of top cable entry
Controls
- ADEM A4 ECU
- EMCP 3 Control Panel
Lube System
- High efficiency oil filter
- Oil drain valves
- Fumes disposal
- Gear-type lube oil pump
- Deep sump oil pan
Mounting System
- Steel base frame (skidable)
- Anti-vibration mounts (shipped loose)
- Designed welded base for increased durability (I-beam design)
Starting/Charging System
- 24-volt starting motor
- 45-amp charging alternator
- Battery rack
- Battery disconnect switch
- Oversized batteries
General
- Paint — Caterpillar yellow except rails and radiators (gloss black)
- Flywheel and flywheel housing — SAE No. 0
Optional Equipment
Air Inlet System
- Air inlet adapters
- Precleaners
Exhaust System
- Stainless steel exhaust flex fittings
- Elbows, flanges, expanders, and Y adapter
Generator
- Permanent magnet excitation
- Oversize and premium generators
Starting/Charging System
- Jacket water heater with shutoff valves
- Battery chargers (10 amp)
Controls
- EMCP 4.2 control panel
- EMCP 4.3 control panel
- Local or remote annunciator panel
- Generator temperature monitoring and protection
- Discreet I/O module
- Load share module (optional with direct rack)