C18 ACERT Tier 2

C18 ACERT Tier 2 Oilfield Diesel Generator Set

C18 ACERT Tier 2
Maximum Rating
545 ekW (680 kVA)
Minimum Rating
440 ekW (550 kVA)
Emissions/Fuel Strategy
U.S. EPA Tier 2, EU Stage II
Producing oil and gas is a complex task that requires equipped designed specifically for the oilfield. Cat C-Series oilfield diesel generator sets offer a rugged design capable of withstanding harsh conditions in the oilfield. Decades of experience in engine manufacturing combined with the latest electronics deliver the highest performance, safe operation, low emissions, and simplified operator interface. Cat generator sets are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C18 ACERT oilfield diesel generator set. Ratings: 440 - 545 ekW (550 - 680 kVA) @ 50 and 60 Hz (1500 and 1800 rpm) meet U.S. EPA Tier 2 equivalent, EU Stage II equivalent emission standards.
Request a Quote
See Similar Used Options
No Documents Available

THE RUNDOWN

Product Support Offered Through the Global Cat Dealer Network
- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your Cat petroleum product - Worldwide parts availability, service, and warranty - Preventive maintenance agreements available for repairbefore- failure opti
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
Web Site
For all your petroleum power requirements, visit www.cat.com/oilandgas.
Engine Specifications
Maximum Rating545 ekW (680 kVA)
Minimum Rating440 ekW (550 kVA)
Emissions/Fuel StrategyU.S. EPA Tier 2, EU Stage II
AspirationTurbocharged, air-to-air aftercooled
Manifold TypeDry
Bore5.7in
Stroke7.2in
Displacement1106.0in³
Engine Control and ProtectionADEM A4
Generator Set ControlEMCP 3.1
GeneratorSR4B
Fuel SystemMEUI
Frequency - Speed50/60 Hz (1500/1800 rpm)
Capacity for Liquids
FuelDiesel
Dimensions
Length143.0in
Width60.0in
Height83.3in
Weight11095.0lb
Standard Equipment

Air Inlet System

  • Dual element air cleaner
  • Service indicator

Cooling System

  • Radiator package mounted (50° C)
  • Coolant drain line with valve at edge of base
  • Coolant level sensor
  • Fan and belt guards
  • Coolant level sight gauge
  • Cat Extended Life Coolant

Exhaust System

  • Dry exhaust manifold
  • Turbo outlet elbow

Fuel System

  • Primary fuel filter with integral water separator
  • Secondary fuel filters
  • Fuel priming pump
  • Flex fuel lines
  • Fuel pressure gauge

Generator

  • SR4B brushless, single-bearing, self-excited
  • Class H insulation
  • Random wound
  • IP23 protection
  • Cat DVR 3-phase sensing with selectable volts/Hz
  • 3 sensing CTs and one droop CT
  • Power center

Generator Attachments

  • RH extended cable access box

Controls

  • ADEM A4 ECU
  • EMCP 3 Control Panel

Lube System

  • High efficiency oil filter
  • Oil drain valves
  • Fumes disposal
  • Gear-type lube oil pump

Mounting System

  • Steel base frame (skidable)

Starting/Charging System

  • 24-volt starting motor
  • 45-amp charging alternator
  • Battery rack
  • Battery disconnect switch

General

  • Paint — Caterpillar yellow except rails and radiators (gloss black)
  • Flywheel and flywheel housing — SAE No. 1
Optional Equipment

Air Inlet System

  • Heavy-duty air cleaner with precleaner

Exhaust System

  • Mufflers
  • Weld Flange

Generator

  • Permanent magnet excitation
  • Oversize and premium generators
  • Anti-condensation space heaters available with permanent magnet excitation generators

Starting/Charging System

  • Jacket water heater with shutoff valves
  • Oversized batteries

Controls

  • Load share module