G3306B Gas Compression Engine
THE RUNDOWN
Advanced Digital Engine Management
The ADEM A4 system represents the next generation of engine management systems while reducing the number of mechanical components and easing troubleshooting. Features include: • Air/Fuel Ratio Control (AFRC) • Electronic ignition • Electronic governing/speed control • Start/stop logic • Engine protection & monitoring
Full Range of Attachments
Large variety of factory-installed engine attachments reduces packaging time
Gas Engine Rating Pro (GERP)
GERP is a web-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.
Product Support Offered Through Global Cat Dealer
More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Caterpillar parts and labor warranty Preventive maintenance agreements available for repairbefore-failure options S•O•SSM program matches your oil and coolant samples against Catepillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval
Over 80 Years of Engine Manufacturing Experience
Over 60 years of natural gas engine production Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products. - Cast engine blocks, heads, cylinder liners, and flywheel housings - Machine critical components - Assemble complete engine
Web Site
For all your petroleum power requirements, visit www.cat.com/oilandgas.
Engine Specifications
| Maximum Rating | 211.0BHP |
| Rated Speed | 1800rpm |
| Emissions | Rich Burn: EPA NSPS Site Compliant Capable with Caterpillar or Customer Supplied AFRC & Aftertreatment |
| Minimum Rating | 145.0BHP |
| Compression Ratio | 10.5:1 |
| Aspiration | Naturally Aspirated or Turbocharged - Aftercooled |
| Rotation from Flywheel End | Counterclockwise |
| Flywheel and Flywheel Housing | SAE No. 1 |
| Flywheel Teeth | 156 |
| Displacement | 638.0in³ |
| Oil Change Interval | 750 hours |
| Ignition, Protection | ADEM A4 |
| Air/Fuel Ratio Control | ADEM A4 |
| Stroke | 6.0in |
| Bore | 4.8in |
| Length | 60in |
| Width | 38in |
| Height | 50in |
| Weight - Dry | 2090lb |
Capacity for Liquids
| Cooling System | 5.25gal (US) |
| Lube Oil System - Refill | 11.9gal (US) |
Standard Equipment
Air Inlet System
- Air cleaner — intermediate duty, dry
- Air cleaner rain cap (shipped loose)
- Service indicator
Control System
- ADEM A4
Cooling System
- Thermostats and housing — full open temperature 97°C (207°F)
- Jacket water pump — gear-driven, centrifugal, non-self-priming
Exhaust System
- Exhaust manifolds — watercooled
- Exhaust elbow — dry
- 102 mm (4 in)
- Three-way catalyst — 1.0 g NOx and 0.5 g NOx catalyst options
Flywheels & Flywheel Housings
- Flywheel, SAE No. 1
- Flywheel housing, SAE No. 1
- SAE standard rotation
Fuel System
- Air/fuel ratio control
- Gas pressure regulator
- Requires 10.3-34.5 kPa (1.5-5 psi) gas
- Natural gas carburetor
Ignition System
- ADEM A4 ignition
Lube System
- Crankcase breather, top mounted
- Oil cooler
- Oil filter
- Oil pan, full sump
- Oil filler and dipstick
Protection System
- The following parameters include alarm and shutdown
Optional Equipment
Charging Alternator
- 24V, 35A alternator
- 24V, 35A CSA alternator*
Cooling System
- Radiators
- Jacket water pump inlet adapter
Exhaust System
- Exhaust flex fitting — ANSI flange
- Exhaust elbow
- Exhaust flange — ANSI flange
Guards
- Fan guard
- Damper guard
Ignition System
- CSA certified electronics and ignition
Instrumentation
- Operator interface panel
- Operator interface panel enclosure
- 15', 20' and 50' interconnect harness
Starting System
- Air pressure regulator
- Air start silencer
- Vane starter
- Electric starter
- Turbine starter
