Cat C280-6 Marine Generator Set
THE RUNDOWN
A3 ECU
Advantages
CAN J1939 data link Waterproof connectors, Maintenance-free, Backup ECU for redundant governing
Customer Interface Panel
Advantages
Interfaces with standard Cat® Marine Monitoring System (PLC in Price List), Provides visual indication of ECU functionality, Accepts 4 — 20 mA or PWM remote throttle speed input, Marine alarm and protection
Electronic Unit Injectors
Advantages
“Drop-in” installation, No threaded fuel connections, High pressure inside injector only, Does not require double wall fuel lines or leak collection device, Injector synchronization not required
Power Rating
| Power Range | 1720 - 1820 ekW |
Generator Set Specifications
| Frequency | 50 / 60 Hz |
| Emissions/Fuel Strategy | U.S. EPA Tier 2, IMO II |
Engine Specifications
| Aspiration | Turbocharged - Aftercooled |
| Bore | 11.0in |
| Stroke | 11.8in |
| Displacement | 6773.0in³ |
| Governor Type | Electronic |
| Fuel System | EUI |
| Compression Ratio 50 Hz | 13.1 |
| Compression Ratio 60 Hz | 13:1 |
| Engine Model | In-line 6, 4-Stroke-Cycle Diesel |
Generator Set Dimensions
| Length | 280.3in |
| Width | 77.2in |
| Height | 154.9in |
| Weight - Estimated | 18000lb |
Standard Equipment
General
- LH or RH service connections
Air Inlet System
- Aftercooler — fresh water, corrosion resistant coated
- Crankcase breathers, top-mounted
- Single turbocharger, rear-mounted, engine oil lubricated
Exhaust System
- Air inlet adapter - Straight / 90 degree / 35 degree
- Dry, gas tight, exhaust manifold
- Turbo speed sensors - overspeed protection
- Exhaust manifold shielding, soft
Control System
- Dual Caterpillar ADEM A4 Electronic Engine Control Modules
- Rigid Wiring Harness
Cooling System
- Aftercooler/oil cooler and jacket water pumps (gear driven)
- Engine coolant water drains
- Single Circuit / Separate Circuit Aftercooler
Fuel System
- Fuel transfer pump, gear driven
- Electronically Controlled Unit Injectors
Instrumentation
- CAT Alarm & Protection System
Lube System
- Oil pump, gear driven
- 2 element oil cooler, engine mounted
- Duplex centrifugal oil filter - engine mounted
- Wet sump
- Prelube pump - air / electric
Protection System
- Mounted oil mist detector
- Crankcase explosion relief valves
Optional Equipment
Fuel System
- Fuel priming pump
- Duplex fuel filters
- SOLAS shielding
Lube System
- Front and rear oil pan drains
- SOLAS shielding
Protection System
- Cylinder pressure relief valves